Nuts, pins, caps

Pushrod positioned between the brake linings on the left rear wheel.

For VW Kombi T2 Bay Window
Years: 01/1973 ->07/1979
Chassis: from no. 213 2102 497->

The pushrod is an essential part of the braking system, distributing the pressure exerted on the brake shoes evenly over the brake drums.This pushrod between the brake linings on the right-hand rear wheel fits VW Combi Bay Window from 01/1973 to 07/1979 from chassis no. 213 2102 497

Lateral handbrake shoe spring for Porsche 968 :

- 968 3.0 - 240hp (M44.43/M44.44) from 1992 to 1995
- 968 Club Sport 3.0 - 240hp (M44.43) from 1993 to 1995

Spring sold individually. 4 quantities required per vehicle.

Upper handbrake shoe spring for Porsche 968 :

- 968 3.0 - 240hp (M44.43/M44.44) from 1992 to 1995
- 968 Club Sport 3.0 - 240hp (M44.43) from 1993 to 1995

Spring sold individually. 2 quantities required per vehicle.

Lower handbrake shoe spring for Porsche 968 :

- 968 3.0 - 240hp (M44.43/M44.44) from 1992 to 1995
- 968 Club Sport 3.0 - 240hp (M44.43) from 1993 to 1995

Spring sold individually. 2 quantities are required per vehicle.

Complete set of clips and springs for fixing front brake shoes.
This kit for front 2-wheelers is essential for holding the brake shoes in place and ensuring that the braking system works properly. These components are crucial to ensure that the brake shoes are properly secured, move safely when activated, and return to their original position once the brake is released.
Suitable for VW Combi Split & Bay Window from 1950 to 07/1970 from chassis no. 1 144 282 to no. 210 2300 000.

Complete kit of brake shoe springs
and adjusting parts for 2 rear wheels.

For VW Transporter T25/T3, 05/1979 ->07/1992
including Syncro version (4 x 4) with 16" wheels.

Pin for locking the castellated nut on the drum brake.

Security clamp on handbrake cable rivet
Sold individually.
For:
- Beetle & Karmann-Ghia
- 181
- Type 3 & Type 4
- Kombi Split & Bay Window

Suitable for VOLKSWAGEN Transporter T25

For Polo (9N1):
- all models with rear brake code: PR:1KB

For Polo (9N3):
- all models

Brake shoe spring kit for Porsche 356 pre-A, A and B from 1950 to 1963 :

- 356 Pre-A from 1950 to 1955
- 356 A from 1956 to 1959
- 356 B from 1960 to 1963

The kit contains everything you need for the front and rear axles.

Complete kit of rear brake shoe springs and
adjusting parts for 2 rear wheels.

For VW Transporter T25/T3, 05/1985 ->07/1992
Syncro version (4 x 4) with 16" wheels.

For all Golf 3 models

For Passat 3 with drums 200 x 40 mm only

Complete mounting kit for rear brake shoes.
Set for left and right-hand side.

Compatible with Seat Ibiza type 6L with rear axle code: PR-1KM

Springs & adjusting parts for brake shoes.
Full set for both wheels
Models equipped with rear drum brakes.

For VW Transporter T4 09/1990 ->12/1995
including Syncro version (4 x 4)
up to chassis No. ->70-T-199 999.

Left rear brake adjustment bar drum for VW Transporter T25 from 1979 to 1992.

Handbrake pushrod positioned between the brake linings on the right or left rear wheel. Sold individually.

For VW Kombi T2 Bay Window
Years: 08/1971 ->12/1972
Chassis: no. 212 2000 001 ->213 2102 496

This brake cam spacer for 2cv cars and derivatives is true to the original.

This brake adjustment cam spacer must be positioned between the washer and the 200mm front drum shoe adjustment cam and the 180mm rear brake drums of the 2cv and its derivatives.

This spacer was originally mounted only on the rear brakes of the first 2cv models

Rear bearing slotted nut with the cotter pin for Porsche 356 :

- 356 Pré-A from 1950 to 1954
- 356 A from 1956 to 1959
- 356 B from 1960 to 1963
- 356 C from 1964 to 1965