Seat

This seat back handle surround, Porsche Guenine, is ideally designed for the satin handle knob like RS11456. It can technically be mounted on the following Porsche :

-> 911 :
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 SC 3.0 from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989
- 911 Turbo 3.0 to 3.3 from 1975 to 1989

-> 964 :
- 964 Carrera 2, Carrera 4 from 1989 to 1994
- 964 Carrera RS from 1992
- 964 Turbo and Turbo S from 1991 to 1994

-> 993 :
- 993 Carreraand Carrera S, Carrera 4 and 4S from 1994 to 1998
- 993 Carrera RS from1995 to 1996
- 993 Turbo and Turbo S from 1995 to 1998

-> 924 :
- 924 from 1976 to 1985
- 924 S from 1986 to 1988
- 924 Turbo from1979 to 1984
- 924 Carrera GT from 1981

-> 944 :
- 944 phase 1 and 2 from 1982 to 1988
- 944 S from 1987 to 1988
- 944 Turbo and Turbo S from 1986 to 1991
- 944 S2 from 1989 to 1991

-> 968 :
-968 from 1992 to 1995
- 968 CS from 1993 to 1995

-> 928 :
- 928 from 1978 to 1982
- 928 S from 1980 to 1986
- 928 S4 from 1987 to 1991
- 928 GT from 1989 to 1991
- 928 GTS from 1992 to 1995

sold to the unit

N.B: Originally, the design of this entourage and thebutton may be different on your Porsche. It can nevertheless be mounted onall these tilting seats and fits perfectly with RS11456

Front passenger seat frame for VW Combi Split from 03/1955 to 07/1961.Includes seat and backrest.

Driver's seat tilting armatures for Porsche 911 type F and 912 from 1965 to 1968 :

- Porsche 911 type F :

- 911 2.0 from 1965 to 1967
- 911 2.0 T / L / S from 1967 to 1968

- Porsche 912 :

- 912 1.6 - 90 hp (616.36) from 1966 to 1968

The kit contains the two driver's seat frames and the bar connecting them.
The locking system is not included.

Set of front seat slides for VW Combi Bay Window from 08/1967 to 07/1976.

Frame for 3-seater front bench seat.
This reproduction complies with the original bench seat with its own springs.
Includes 3-seater seat and 3-seater backrest but not upholstery or covers.

For VW Split Window Camper
Years: 03/1955 ->07/1962

2/3 front seat frame for VOLKSWAGEN Split Screen Camper from 08/1962 to 07/1967.
Includes seat and backrest.

Central bench seat frame for VOLKSWAGEN Split Screen Camper from 08/1963 to 07/1967.
Includes seat and backrest.

Front upper backrest support for VW Combi SPLIT from 03/1955 to 07/1962.

Front backrest support for VW Combi SPLIT from 03/1955 to 07/1962.
Older versions were fitted with these for the front seat, so if yours is rusty or broken, this item is a must.

2/3 front seat frame for VOLKSWAGEN Combi Split Brazil (1957-1975).
Includes seat and backrest.

Front driver's seat frame for VW Combi Split from 03/1955 to 07/1961.Includes seat and backrest.

Passenger seat tilting armatures for Porsche 911 type F and 912 from 1965 to 1968 :

- Porsche 911 type F :

- 911 2.0 from 1965 to 1967
- 911 2.0 T / L / S from 1967 to 1968

- Porsche 912 :

- 912 1.6 - 90 hp (616.36) from 1966 to 1968

The kit contains the two driver's seat frames and the bar connecting them.
The locking system is not included.

Seat base to install a bucket seat on VW Golf 1 and 2, Polo 2 and 3, Corrado.
For the left or right side.
Sold individually.

This seat guide, pull tab and tilt clip kit is a reproduction that fits Porsche 911 type 993 from 1994 to 1998 :

- 993 3.6 - 272hp (M64.05/06/07/08) Carrera from 1994 to 1995
- 993 3.6 - 272hp (M64.05/07) Carrera 4 from 1995
- 993 3.6 - 285hp (M64.21/22/23/24) Carrera and Carrera S from 1996 to 1998
- 993 3.6 - 285hp (M64.21/23) Carrera 4 and Carrera 4S from 1996 to 1998
- 993 3.8 - 300hp (M64.20) Carrera RS from 1995 to 1996
- 993 3.6 - 408hp (M64.60) Turbo from 1995 to 1998
- 993 3.6 - 450hp (M64.60S) Turbo S from 1997 to 1998
- 993 3.6 - 430hp (M64.60R) GT2 from 1996 to 1998

This seat guide, pull tab and tilt clip kit is a reproduction that fits Porsche 924 from 1976 to 1988 :

- 924 2.0 - 125 hp (XJ/XK) from 1976 to 1985
- 924 2.5 S - 150 hp (M44.07/M44.08) from 1986 to 1987
- 924 2.5 S - 160 hp (M44.09/M44.10) from 1988
- 924 2.0 Turbo - 170 hp (M31.01) from 1979 to 1980
- 924 2.0 Turbo - 177 hp (M31.03) from 1981 to 1985
- 924 2.0 Carrera GT - 210 hp (M31.50) from 1981

This seat guide, pull cord and tilt clip kit is a reproduction suitable for Porsche 944 from 1982 to 1991:

- 944 phase 1 - 2.5 - 163hp (M44.01 to 04) from 1982 to 1985

- 944 phase 2 - 2.5 - 163hp (M44.05 to 08) from 1985 to 1987
- 944 phase 2 - 2.5 - 160hp (M44.09/M44.10) from 1988
- 944 phase 2 - 2.5 S - 190hp (M44.40) from 1987 to 1988
- 944 phase 2 - 2.7 - 165hp (M44.11/M44.12) from 1989
- 944 phase 2 - 3.0 S2 - 211hp (M44.41) from 1989 to 1991

- 944 phase 2 - 2.5 Turbo - 220hp (M44.50/M44.51) from 1986 to 1988
- 944 phase 2 - 2.5 Turbo S/Cup M578 - 250hp (M44.52) from 1988
- 944 phase 2 - 2.5 Turbo - 250hp (M44.52) from 1989 to 1991

This seat guide, pull tab and tilt clip kit is a reproduction suitable for Porsche 968 from 1992 to 1995:

- 968 3.0 - 240hp (M44.43/M44.44) from 1992 to 1995
- 968 Club Sport 3.0 - 240hp (M44.43) from 1993 to 1995

Suitable for:
- 2-door Golf 1 and Caddy until ->83
- Scirocco, until ->83
- Polo, until ->83
- Audi 50, until->81
- Audi 80 2-door and coupé until ->87

Trim on rear seat back tipping lever
black plastic ason the original.

For Combi Bay Window, 11/1971 ->07/1979
Since chassis no. 221 2102 251->

Trim on rear seat back tipping lever
black plastic as on the original.

For Transporter T25/T3, Caravelle, 05/1979 ->07/1992