Seat

This reinforced seat base for 2cvs before 1970 - seat is superior quality.
This reinforced PVC mesh seat base is much stronger than the original canvas. It is stiffer so it gives you a higher and much more durable sitting position.
This seat bottom is fitted with elastic seat straps in the same way as traditional seat bottoms.
It is compatible with front and rear seats and bench seats, and can even be used for symmetrical backrests for a firmer hold.

Installation tips:
- Spread the fibres slightly with a pointed object or a simple nail to hook on the seat elastic hooks.
- Glue the surface of the seat bottom and the foam with a neoprene contact adhesive and wait until the adhesive is dry to the touch before pressing both surfaces together firmly.

These Bayadere striped front seat covers for AZAM 2cvs - Blue diamond are a quality reproduction.

These symmetrical seat covers were initially fitted on AZAM 2cvs, in blue diamond fabric. It is however compatible with later 2cvs with symmetrical front seats.

This set includes:
- 2 front seat covers

If you are completely reupholstering your vehicle, you are strongly advised to replace the seat elastics (50 per seat), seat foam and seat covers.

These Bayadere striped front seat covers for AZAM 2cvs - red diamond are a quality reproduction.

These symmetrical seat covers were initially fitted on AZAM 2cvs, in red diamond fabric. It is however compatible with later 2cvs with symmetrical front seats.

This set includes:
- 2 front seat covers

If you are completely reupholstering your vehicle, you are strongly advised to replace the seat elastics (50 per seat), seat foam and seat covers.

These Bayadere striped front seat covers for AZAM 2cvs - green diamond are a quality reproduction.

These symmetrical seat covers were initially fitted on AZAM 2cvs, in green diamond fabric. It is however compatible with later 2cvs with symmetrical front seats.

This set includes:
- 2 front seat covers

If you are completely reupholstering your vehicle, you are strongly advised to replace the seat elastics (50 per seat), seat foam and seat covers.

Plastic trim on the side of the seat, guide for central seat back tipping pull rod to get to the back. Black plastic as on the original.

For Combi Bay Window, 08/1967 ->10/1971
Chassis no. 228 000 001 ->221 2102 250.

Thebench seat clamp for a VW Combi is an important part of securing and fixing the rear bench seat in the vehicle. This type of bracket holds the rear seat in place, securing it firmly by welding to the vehicle frame to prevent unwanted movement when the vehicle is in motion.In the VW Combi, the rear bench seat can be fixed or removable, depending on the needs of the owner and the use of the vehicle. The fixing bracket is therefore essential for the safety and stability of the seat.
The bracket holds the bench seat in place, securing it firmly to the vehicle's structure. This is crucial for passenger safety and to prevent the bench seat from shifting, particularly during hard braking or accidents.A properly installed bracket prevents the bench seat from moving and generating annoying noises when the vehicle is moving, such as rattling or squeaking.
This locking plate, to be welded to the floor to secure the T-bolt securing the rear seat, is designed for VW Combi Bay Window from 08/1967 to 07/1979.
Requires 2 to 6 pieces depending on assembly.

Rear seat attachment bracket for VW Combi Split from 1950 to 07/1967.

Lever button for adjusting the seat
Left or right
Black.

For:
- Combi Split, 08/1962 ->07/1967

Lever button for adjusting the seat
Left or right
Ivory beige.

For:
- Combi Split, 08/1962 ->07/1967
- Combi BayWindow, 08/1967 ->07/1979

Hanging brackets on top of front seat (cab).
Anodized metal, excellent workmanship.
Sold in pairs.

For older Combi Split models.

This straight seat frame cover for VOLKSWAGEN Beetle (08/1975-12/1986) - without hole is compatible with driver (LHD) or passenger (RHD) seats for vehicles fromAugust 1975.

Concealing the seat frame, it has no hole but a round imprint.

Right or left front seat center slider guide for VW Golf 1 Saloon, Cabriolet, Caddy, Jetta 1, Scirocco 1 and 2:

- Golf 1 Saloon from 08/1980 to 12/1983
- Golf 1 Convertible from 08/1983 to 07/1993
- Caddy 1 from 08/1982 to 07/1992
- Jetta 1 from 08/1980 to 02/1984
- Scirocco 1 and 2 from 08/1980 to 07/1992

Delivered without the rear pads.

This rubber pad is located on the right or left front seat support directly on the body. It prevents play, guides and protects the central slide of the chair. If one of them has play or difficulty sliding, replacement of the pad will be necessary.

Quantity needed per vehicle: 2 (one for each front seat)

Screws on seat back tilting frame for Porsche 911 type F from 1970 to 1973 :

- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS from 1973

The screw is sold individually, and 12 quantities are required per seat.

Screws on seat back tilting frame for Porsche 356 B and C from 1960 to 1965 :

- 356 B from 1960 to 1963
- 356 C from 1964 to 1965

The screw is sold individually and 12 quantities are required per seat.

Seat adjuster for Porsche 928 from 1978 to 1995 :

- 928 4.5 - 240hp (M28.01/M28.02) from 1978 to 1979
- 928 4.5 - 240hp (M28.09/M28.10) from 1980 to 1982
- 928 S 4.7 - 300hp (M28.11/M28.12) from 1980 to 1983
- 928 S 4.7 M298 - 270hp (M28.43) from 1985
- 928 S 4.7 M299 - 270hp (M28.44) from 1985
- 928 S 4.7 M298 - 290hp (M28.45) from 1986
- 928 S 4.7 M299 - 290hp (M28.46) from 1986
- 928 S2 4.7 - 310hp (M28.21/M28.22) from 1984 to 1986
- 928 S4 5.0 - 320hp (M28.41/M28.42) from 1987 to 1991
- 928 GT 5.0 - 330hp (M28.47) from 1989 to 1991
- 928 GTS 5.4 - 350hp (M28.49/M28.50) from 1992 to 1995

The knob is sold individually, and two quantities are required per vehicle.
Suitable for both left and right sides.

RH side of seat (driver's or passenger's)
Version with hole
For:
- Polo 1 04/75 ->09/81
- Golf 1 08/74 ->07/83
- Golf 1 cabriolet 01/79 ->07/83
- Golf 1 Caddy 10/82 ->7/83
- Jetta 1 08/74 ->07/83
- Scirocco 1 08/74 ->07/83

RH side of seat (driver's or passenger's)
Version without hole
For:
- Polo 1 04/75 ->09/81
- Golf 1 08/74 ->07/83
- Golf 1 cabriolet 01/79 ->07/83
- Golf 1 Caddy 10/82 ->7/83
- Jetta 1 08/74 ->07/83
- Scirocco 1 08/74 ->07/83

This left seat frame cover for VOLKSWAGEN Beetle (08/1975-12/1986) - round hole is compatible with driver (LHD) or passenger (RHD) seats for vehicles fromAugust 1975.

Concealing the seat frame, it features a round hole for the backrest tilt adjustment knob.

This left seat frame cover for VOLKSWAGEN Beetle (08/1975-12/1986) - without hole is compatible with passenger (LHD) or driver (RHD) seats for vehicles fromAugust 1975.

Hiding the seat frame, it has no hole, but features a round imprint.

1/3 front bench seat frame for VOLKSWAGEN Combi Split Brazil (1957-1975).
Includes seat and backrest.