Exhaust silencer

High-efficiency "Python" CSP Sport exhaust system
(not approved) Version with 38 mm tubes
Compact muffler in polished stainless steel 1.4301
4-in-1 manifold in 1.4507 stainless steel
Recommended installation with 38mm CSP heating boxes or J-tubes.
Possibility of mounting with original heater boxes by ordering VC20463.
Also consider CSP VC20460 heating fittings.
Model without heater for double carburetor
For VW Combi Bay Window 1600, 1972 ->1979
Ideal for Type 1 engines (except 1200)
with valves up to 40 / 35.5 mm
use up to ->6000 rpm.

DANSK sport exhaust silencer in stainless steel with weld end for Porsche 911 type G from 1975 to 1989 :

- 911 2.7 from 1975 to 1977
- 911 S 2.7 from 1975 to 1977
- 911 Carrera 2.7 from 1975 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 SC 3.0 from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

The silencer is TÜV/EEC approved.

Outlet diameter: 84mm

This pair of stainless steel EVOX valves can be used with a remote control. It is suitable for Porsche 911 type 997 phase 1 :

- 997 phase 1 3.6 - 325 hp (M96.05) Carrera and Carrera 4 from 2005 to 2008
- 997 phase 1 3.8 - 355 hp (M97.01) Carrera S and Carrera 4S from 2005 to 2008
- 997 phase 1 3.8 X51 - 380 hp (M97.01S) Carrera S and Carrera 4S from 2007 to 2008

In position "Closed" : sobriety and elegance are waiting for you. Ideal to wake up your Flat 6 discreetly and (almost) go unnoticed every day, while preserving the aura of your Porsche.

In position "Open" : the world of racing is open to you! With each touch of the right pedal, it is an emotion and an adrenaline that will make you rediscover your 997 !

Plan to acquire the EVOX exhaust outlets with these silencers for the Porsche 997 phase 1 :
- 997 phase 1 3.6 - 325 hp (M96.05) Carrera and Carrera 4 from 2005 to 2008
- 997 equipped with PSE (Porsche Sport Exhaust)

For E36:
- 316 i Saloon ->03/93 M40 engine

Rear exhaust silencer for Golf 3 GTI
For Golf 3 20th Anniversary version :- 2.0 16s 150hp (ABF)
Genuine Volkswagen part

For E36 Saloon, Coupé, Cabriolet and Estate :
- 320i and 323i M50 and M52 engines

Final exhaust silencer,
model with flange. Original quality.

ForVW Transporter T25/T3, Bus,
Caravelle, Joker, Syncro (4 x 4).
Years:08/1989 ->07/1992
Chassis no. L-000 001 ->N-015 000.
Engine: 1.6 Turbo-Diesel 70hp (JX)

Stainless steel 2 x 80 mm round outlet
for silencers GC50520S & GC50620S
(supplied alone without the silencer to be ordered separately)

Sport exhaust mufflers SCART with valves in stainless steel for Cayman 987 phase 1 :

- 987 2.7 Cayman phase 1 - 245 hp (M97.20) from 2007 to 2008
- 987 3.4 Cayman S phase 1 - 295 hp (M97.21) from 2006 to 2008
- 987 3.4 Cayman S Sport - 303 hp (M97.22) of 2008

The valve system allows, using a remote control, to change the tone of your exhaust.

In discreet mode, the sound of the Cayman will be a little more present than the original exhaust system.
In open valves mode, the sound of your Flat 6 becomes angry, very sporty and will catapult you into another dimension.

If you include the SCART RS60037 Sport collectors / catalysts, you will hear the melody of a 997 GT3 RS!

Delivered with the mounting kit containing:
- 1 switch
- Electric Wire
- Air wire
- Joints
- Stainless screws
- Inox brake nuts
- High temperature coppery grease

Provide the RS60040 Y-junction of the 2 silencers for fixing the 2 RS10993 exhaust outlets

For Golf 2 Syncro (4 x 4), 08/85 ->07/91:
- 1.8 84hp (RH)
- 1.8 90hp (GU, GX)
- 1.8 injection 8v 98hp (1P)
except Country version.

Double-outlet version of the DANSK RS10714 Sport silencer.
Made of polished stainless steel, this silencer system offers a racy look with its 2 x 84 mm outlets.To the untrained eye, it could give the impression of an original system. The sound is full of low-end rasp and brings out the sound of the Flat 6 to perfection.
Designed to be fitted to G-series Porsche 911s from 1975 onwards, with small type RS11272 intercoolers:
- 911 2.7 from 1975 to 1977- 911 2.7 S from 1975- 911 Carrera 2.7 from 1975 to 1976- 911 Carrera 3.0 from 1976 to 1977- 911 3.0 SC from 1978 to 1983- 911 Carrera 3.2 from 1984 to 1989
1-inlet silencerOutlet diameter: 84 mm
Rear valance cut-out required to accommodate tailpipes.TÜV/CEE approved

SCART Sport Ultima Recital stainless steel rear exhaust for Porsche 911 type 996 :

- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera from 1998 to 2001
- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera 4 from 1998 to 2001
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 phase 1 3.6 GT3 - 360 hp (M96.76) from 2000 to 2001
- 996 phase 2 3.6 GT3 - 380 hp (M96.79) from 2004 to 2005
- 996 phase 2 3.6 GT3 RS - 380 hp (M96.79) of 2004

SCART exhausts are made from stainless steel and assembled by hand.

They are 100% French made.

Supplied with mounting kit : stainless steel screws, all stainless steel locknuts, high temperature copper grease and electric and air bundles.

For optimal mounting, use the inlet sleeves in the silencers and the collars of the outlets in original quality (sleeves and collars not provided)

DANSK SuperSound Sport exhaust in stainless steel for Porsche 911 type 997 phase 1 :

- 997 phase 1 3.6 - 325 hp (M96.05) Carrera and Carrera 4 from 2005 to 2008
- 997 phase 1 3.8 - 355 hp (M97.01) Carrera S and Carrera 4S from 2005 to 2008
- 997 phase 1 3.8 X51 - 380 hp (M97.01S) Carrera S and Carrera 4S from 2007 to 2008

If you own a 997 phase 1 3.6 - 325 cv, Carrera or a Carrera 4, you will need to mount the RS10903 muffler outlets.

The famous CSP PYTHON exhaust system is now available for VW Type 3. Intended for original or enhanced engines, their design and finish meet all expectations. This high-performance exhaust can be connected to the original heat exchangers for on-road use. The Python manifold made of 1.4307 stainless steel has tubes of equal length and is manufactured with a precision corresponding to the maximum speed of the exhaust gases, which improves the torque curve and the maximum power. The silencer made of polished 1.4301 stainless steel produces a sporty, muffled sound. CSP quality manufacturing. Diameter: 42 mm

For VW:
- Type 3, Notchback, Fastback, Variant
Years: 04/1961 ->07/1973
- Karmann-Ghia type 34

DANSK Sport exhaust silencer in 304/4301 polished stainless steel for Porsche 911 2.7 :

- 911 2.7 from 1974 to 1975
- 911 2.7 S from 1974 to 1975
- 911 Carrera 2.7 from 1974 to 1975

Silencer with 2 inlets.
Outlet diameter: 70 mm

TÜV/EEC Approved

Stainless steel SCART Riva exhaust silencer for Porsche 911 :

- 911 2.7 from 1975 to 1977
- 911 2.7 S from 1975
- 911 Carrera 2.7 from 1975 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983

The name "RIVA" refers to the luxurious and legendary Italian Yacht with its hoarse characteristic sound. Known for the sonority of its Flat 6, your Porsche will offer you the best of its sound. The accelerations will give you the thrill, become angry even bestial, especially if you associate it with one of the pre mufflers SCART Sport or Racing Super Sound (RS60006 or RS60004). The experience will be more intense.

The SCART exhausts are stainless steel and assembled by hand, their construction is 100% French.

Comes with mounting kit including :
- Seals, stainless steel screws, stainless steel lock nuts and high temperature copper grease
-2 SCART straps
- Support replacing the original one

Sport exhaust silencer in stainless steel
High quality from the "Vintage Speed" brand
Model without heater for double carburettors. Intended for a Type 1 engine enhanced to 125hp thanks to the optimised flow. Large bore side exhaust pipe.

For VW Kombi Split, 08/1959 ->07/1967
with engine type 1: 1300, 1500, 1600+

USA non-catalytic exhaust silencer
Model for skirt with single notch on right.

For Beetle USA, 08/1974 ->12/1975
engine 1600cc (AJ) injection L-Jetronic
- Manual B.V., 08/1974 ->12/1975 N° 000 001 ->071 682.
- B.V automatic, 08/1974 ->09/1974 N° 000 001 ->012 504.

Adaptable to replace the system on catalyzed USA models 01/1976 ->01/1980 since N° 071 683-> / 012 505->.

The famous CSP PYTHON exhaust system is now available for VW Type 3. Intended for original or enhanced engines, their design and finish meet all expectations. This high-performance exhaust can be connected to the original heat exchangers for on-road use. The Python manifold made of 1.4307 stainless steel has tubes of equal length and is manufactured with a precision corresponding to the maximum speed of the exhaust gases, which improves the torque curve and the maximum power. The silencer made of polished 1.4301 stainless steel produces a sporty, muffled sound. CSP quality manufacturing. Diameter: 45 mm.

For VW:
- Type 3, Notchback, Fastback, Variant
Years: 04/1961 ->07/1973
- Karmann-Ghia type 34
Years: 09/1961 ->07/1969

WASP final exhaust silencer developed specially by CSP & JP Motorsport for high-performance Type 1 Street & Dragster engines. 3 stage model for engines from 270cv and over.

- Meticulous, high-quality manufacturing
- 1.4301 stainless steel
- For Beetle with Type 1 engine
- Installs with no need for bodywork modification