Lambda sensor

Lambda sensor for Golf 3 from 1995->, up to chassis No. 1H-S-120001->:
- 2.0 16v 150hp (ABF)

BOSCH Lambda Probe for Peugeot 205

This BOSCH Lambda Probe for Peugeot 205 is only suitable for the models below:

Peugeot 205 Cabriolet

- 205 CJ 1.1 L - 60hp from 10/1989 to 12/1994
- 205 CJ 1.4 L - 75hp from 05/1991 to 12/1994
- 205 CJ 1.6 L - 88hp from 08/1992 to 12/1994

Peugeot 205 Phase II, 3 and 5 doors versions

- 205 1.0 L - 50hp from 08/1992 to 05/1997
- 205 1.1 L - 60hp from 07/1989 to 09/1998
- 205 1.4 L - 75hp from 07/1988 to 09/1998
- 205 1.4 L - 75hp from 08/1990 to 07/1998
- 205 1.6 L - 90hp from 08/1990 to 07/1992
- 205 Automatic 1.6 L - 88hp from 05/1990 to 09/1998
- 205 1.9 L - 121hp from 08/1990 to 05/1997
- 205 GTI 1.9 L - 120hp from 10/1987 to 10/1994
- 205 GTI 1.9 L - 128hp from 10/1987 to 09/1998

Peugeot 205 Utility

- 205 Van 1.1 L - 60hp from 08/1990 to 05/1997

Replacement of the lambda sensor is advised by interval of 100,000 km.

Ridex lambda sensor for Bmw 3 Series:
- Compatible with all Bmw 3 Series E36 Sedan, Touring, Compact, Coupé and Cabriolet versions from 12/1989 to 05/1995 only with 4-cylinder petrol engine engine code m40 m42 m43.

Universal
Without gasket

Allows you to connect your Lambda sensor to all types of exhaust. Simply drill a hole in the tube where you need it and weld on the ring (supplied without lambda probe).
Dimensions: M18 x 1.5

Lambda sensor for Bmw 7 Series E38:

Bmw 7 Series E38 :

- 728i 6cyl 193hp from 09/1998 to 07/2001 (engine code m52b28tu)
- 728iL 6cyl 193hp from 09/1998 to 07/2001 (engine code m52b28tu)
- 735i 8cyl 236hp from 09/1998 to 07/2001 (engine code m62b35)
- 735iL 8cyl 236hp from 09/1998 to 07/2001 (engine code m62b35)
- 740i 8cyl 286hp from 09/1998 to 07/2001 (engine code m62b44)
- 740iL 8cyl 286hp from 09/1998 to 07/2001 (engine code m62b44)
- 750i 12cyl 326hp from 11/1993 to 07/1998 (engine code m73)
- 750i 12cyl 326hp from 03/1998 to 07/2001 (engine code m73n)
- 750iL 12cyl 326hp from 01/1994 to 08/1998 (engine code m73)
- 750iL 12cyl 326hp from 09/1998 to 07/2001 (engine code m73n)
- 750iLS 12cyl 326hp from 03/1995 to 08/1998 (engine code m73)
- 750iLS 12cyl 326hp from 08/1998 to 07/2001 (engine code m73n)
- 750iLP 12cyl 326hp from 10/1998 to 07/2001 (engine code m73n)
- 750i Limousine 12hp 326hp from 07/1996 to 08/1998 (engine code m73)
- 750i Limousine 12cyl 326hp from 08/1998 to 07/2001 (engine code m73n)

Not suitable for Bmw 7 Series E38 728i engine code m52b28 and 730/740i v8 engine code m60.

Tip: to find out whether the cause of your vehicle's excessive pollution is due to the Lambda sensor(s), have a diagnostic test (using a suitcase) carried out by your garage.
Mecatechnic does not accept the return of sensors with traces of assembly. Thank you for your understanding.

Lambda sensor for Bmw 7 Series E38:

Bmw 7 Series E38 :

- 735i 8cyl 236hp from 12/1994 to 07/2001 (engine code m62b35)
- 735iL 8cyl 236hp from 05/1995 to 07/2001 (engine code m62b35)
- 740i 8cyl 286hp from 04/1996 to 07/2001 (engine code m62b44)
- 740iL 8cyl 286hp from 04/1996 to 07/2001 (engine code m62b44)

WARNING: Not suitable for Bmw 7 Series E38 V8 engine code m60.

Tip: to determine whether the cause of your vehicle's excessive pollution is due to the Lambda sensor(s), have a diagnostic test performed by your garage.
Mecatechnic does not accept the return of sensors with traces of assembly. Thank you for your understanding.

For Polo 9N1:
- 1.4 75hp (AUA, BBY except auto gearbox)
- 1.4 100hp (AUB, BBZ)

For Polo 9N3:
- 1.4 100hp (BBZ)

Catalytic converter sensor for Golf 4 and Bora :
- 1.6 105hp (ATN, AUS, AZD)

Lambda sensor for Peugeot 205 GTI 1.9 catalysed.
Also fits 205 1.6 GT, 205 1.6 XS, 205 1.6 Automatic...
Assignments :- 1.0 XE, XR, Junior catalyzed 954cm3 50hp (TU9M/Z) from 08/1992 to 07/1995- 1.1 XE, GE, XL, GL, XR, GR catalytic 1124cm3 60hp (TU1M/Z) from 08/1992 to 07/1995- 1.4 GR, SR, XR Cat 1360cm3 75hp (TU3M/Z) from 08/1992 to 12/1998- 1.6 GT, XS 1580cm3 89hp (XU5M/Z) from 08/1992 to 07/1993- 1.6 Automatic catalyzed 1580cm3 89hp (XU5M/Z) from 08/1993 to 08/1994- 1.9 GTI Catalyzed 1905cm3 122hp (XU9JA/Z) from 08/1992 to 12/1993

Lambda sensor hole screws for Porsche 968 from 1992 to 1995 :
- 968 3.0 - 240hp (M44.43/M44.44) from 1992 to 1995- 968 Club Sport 3.0 - 240hp (M44.43) from 1993 to 1995
The screw is sold individually and only one quantity is required.

Lambda sensor hole screw for Porsche Boxster type 986 from 1997 to 2004 :
- 986 2.5 Boxster - 204 hp (M96.20) from 1997 to 1999- 986 2.7 Boxster - 220 hp (M96.22) from 2000 to 2002- 986 3.2 Boxster S - 252 hp (M96.21) from 2000 to 2002
- 986 2.7 Boxster - 228 hp (M96.23) from 2003 to 2004- 986 3.2 Boxster S - 260 hp (M96.24) from 2003 to 2004- 986 3.2 Boxster S550 - 266 hp (M96.24) from 2003 to 2004
The screw is sold individually , and four quantities are required.

Lambda sensor hole screw for Porsche 911 type 993 from 1994 to 1998 :
- 993 3.6 - 272hp (M64.05/06/07/08) Carrera from 1994 to 1995- 993 3.6 - 272hp (M64.05/07) Carrera 4 from 1995- 993 3.6 - 285hp (M64.21/22/23/24) Carrera and Carrera S from 1996 to 1998- 993 3.6 - 285hp (M64.21/23) Carrera 4 and Carrera 4S from 1996 to 1998- 993 3.8 - 300hp (M64.20) Carrera RS from 1995 to 1996
- 993 3.6 - 408hp (M64.60) Turbo from 1995 to 1998- 993 3.6 - 450hp (M64.60S) Turbo S from 1997 to 1998
The screw is sold individually and only one quantity is required.

Lambda sensor hole screws for Porsche 944 from 1986 to 1991 :
- 944 phase 2 - 2.5 - 160hp (M44.09/M44.10) from 1988- 944 phase 2 - 2.5 S - 190hp (M44.40) from 1987 to 1988- 944 phase 2 - 2.7 - 165hp (M44.11/M44.12) from 1989- 944 phase 2 - 3.0 S2 - 211hp (M44.41) from 1989 to 1991
- 944 2.5 Turbo - 220hp (M44.50/M44.51) from 1986 to 1988- 944 2.5 Turbo S/Cup M578 - 250hp (M44.52) from 1988- 944 2.5 Turbo - 250hp (M44.52) from 1989 to 1991
The screw is sold individually and only one quantity is required.

Lambda sensor hole screw for Porsche 911 type 996 GT3 and GT3RS from 2000 to 2005 :
- 996 phase 1 3.6 GT3 - 360 hp (M96.76) from 2000 to 2001- 996 phase 2 3.6 GT3 - 380 hp (M96.79) from 2004 to 2005- 996 phase 2 3.6 GT3 RS - 380 hp (M96.79) from 2004
The screw is sold individually and two quantities are required.

Lambda sensor hole screw for Porsche 911 type 997 from 2005 to 2008 :
- 997 phase 1 3.6 - 325 hp (M96.05) Carrera from 2005 to 2008- 997 phase 1 3.6 - 325 hp (M96.05) Carrera 4 from 2005 to 2008- 997 phase 1 3.8 - 355 hp (M97.01) Carrera S from 2005 to 2008- 997 phase 1 3.8 - 355 hp (M97.01) Carrera 4S from 2005 to 2008- 997 phase 1 3.8 X51 - 380 hp (M97.01S) Carrera S from 2007 to 2008- 997 phase 1 3.8 X51 - 380 hp (M97.01S) Carrera 4S from 2007 to 2008
The screw is sold individually and two quantities are required.

MEYLE Lambda sensor before catalytic converter for Audi TT (8J)
For Audi TT (8J) :- 1.8 TFSI 160hp (CDAA)- 2.0 TFSI 200hp (CCZA)- TTS Quattro 256hp (CDLC, CRZA)- TTS Quattro 265hp (BHZ, CDLA)
Probe positioned upstream of catalytic converterWith thermal protection on harness
Original MEYLE quality

Lambda sensor on exhaust for electronic management. 3-pin model,
For VW Golf 2 with catalytic converter :- 1.3 54hp (HK)- 1.3 55hp (MH, NZ, 2G)- 1.8 98hp (1P) Country- 1.8 105hp (RV)- 1.8 108hp (PF)- 1.8 112hp (PB)- 1.8 160hp (1H) Rallye

For E36:
- 316 i 1.9 engine M43 and 318tiengine M44, Compact
- 318 is engine M44, Saloon and Coupé

ForE46engine M43:
(Lambda adjustment sensor before the catalytic converter)
- 316 i 1.6 and 1.9 Saloon
- 316 Ci and 318 Ci Coupé
- 318 i Saloonand Touring

For E39 engine M62:
()
- 535 i Saloon
- 540 i Saloon and Touring
- 540 iP Saloon

For E46 Cabriolet:
- 320 Ci, 323 Ci, 325 Ci, 330 Ci

For E46Compact:
- 325 ti

For E46 Coupé:
- 320 Ci M52 / M54
- 323Ci, 325 Ci, 328 Ci, 330 Ci

For E46 Saloon:
- 320 i M52 / M54
- 323 i, 325 i/xi,328 i, 330 i/xi

For E46 Touring:
- 320 i M52 / M54,
-325 i/xi, 328 i, 330 i/xi