Exhaust system joints

Gasket between manifold and exhaust pipe

For VOLKSWAGEN LT (type 28):
- 2.4 petrol 90hp and 95hp (1E, DL)
- 2.4 Diesel 69hp, 75hp, 95hp (ACT,1S, CP, DW, ACL)
- 2.4 Turbo Diesel 92hp and 102hp (1G, DV)

For VOLKSWAGEN Transporter T4 from 1999 to 2003:
- 2.5 Petrol 115hp (APL, AVT)

Complete kit for exhaust silencer and tailpipe

For Transporter T25 / T3, 08/1982 ->07/1992
Gasoline engines (water-cooled) :
- 1900cc 78hp (DG) 08/82 ->07/85
- 1900cc 90hp (GW) 08/83 ->07/85
- 1900cc 60hp (DF) 08/82 ->07/92
Petrol engines (air-cooled) :
- 2000 (CU, HP) 05/79 ->12/82

For Bay Window Combi

Exhaust seal between cylinder head exit and right-handheater box (cylinder 1 or 4). 2 required per engine, sold individually.

For VW Kombi Bay Window T2 engine type 4:
- 2000 (CJ), 08/1978 ->07/1979
From chassis no. 219 2000 001->

For VW Transporter T25/T3, Type 4 engines:
- 2000 (CU, CV), 05/1979 ->12/1982

Kit for final exhaust connection to manifold or end pipe attachment :
- 1 x gasket and clamp
- 1 x set of bolts, washers and nuts
Original quality
Need 3 kits for one silencer, sold individually.

For Transporter T25 / T3, 05/1979 ->06/1980
Engine 1600cc type CT until N°->073 818.
(1st assembly)

Kit of gaskets, clamps and screws for fixing the exhaust tailpipe for VW Combi SPLIT with type 1 engine (1600cc).

Kit for fitting exhaust pipe to pipework or attaching the end outlet pipe:
- 1 x gasket and clamp
- 1 x set of bolts, washers and nuts
3 kits required for a silencer, sold individually.

For Beetle USA, 08/1974 ->12/1975
1600cc engine (AJ) L-Jetronic injection
- Manual gearbox, 08/1974 ->12/1975 No.000 001 ->071 682.
- Automatic gearbox, 08/1974 ->09/1974 no.000 001 ->012 504.

Joint ring between exhaust line and silencer
Connection dimensions : 50 -> 50 mm

For VOLKSWAGEN LT (type 28) :
- 2.4 95hp ( DL, HS)
- 2.4 Diesel 75hp ( DW,)
- 2.4 Turbo Diesel 102hp (DV)

Exhaust manifold sea on cylinder head for cylinders 1 to 3

For Transporter T4 type 7D:
- 2.8 VR6 140hp (AES)

Exhaust manifold sea on cylinder head for cylinders 4 to 6

For Transporter T4 type 7D:
- 2.8 VR6 140hp (AES)

Exhaust gasket on cylinder head for VOLKSWAGEN Transporter T4 from 2001 from chassis no.70-1-100001:
- 2.4 Diesel 75hp (AJA)
- 2.5 TDi 88hp (AJT, AYY)
- 2.5 TDi 102hp (ACV, AUF, AYC)
- 2.5 TDi 151hp (AHY, AXG)

Gaskets and clamps are essential to ensure that the exhaust system is securely and tightly fastened. This kit includes everything you need to replace the components that connect the exhaust tailpipe to the main exhaust, ensuring that the vehicle meets safety and performance standards .
This kit includes gaskets, clamps and bolts for fixing the tailpipe and is suitable for VW Combi Bay Window with type 1 (1600cc) engine from 08/1976 to 07/1979.

Metal clamp and seal 35 mm, original type German quality for coupling and sealing between the heating box and the left or right-hand tube. 2 required for one engine, sold per unit.

For Transporter T25/T3, 05/1979 ->12/1982
1600cc engine type CT (1st and 2nd mounting).

Sealbetween left or right-hand tube and end silencer
Centreline distance: 70 mm
Inner diameter: 45 mm
2 required, sold per unit.

For Transporter T25/T3, 06/1980 ->12/1982
1600cc engine type CT since no. 073 819->
(2nd mounting)

Kit for final exhaust coupling:
- 2 x 45 mm seals between the silencer and the pipes
- 1 x exhaust pipe seal and clamp collar
- 1 set of requisite bolts, washers and nuts.

For Transporter T25/T3, 06/1980 ->12/1982
1600cc engine type CT since no. 073 819->
(2nd mounting)

Ajusa exhaust catalyst gasket for Bmw x5:
Bmw x5 E53 :
- 3.0i 6cyl 231hp phase 1 from 08/1999 to 09/2003 (engine code M54B30)- 3.0i 6cyl 231hp phase 2 from 10/2003 to 09/2006 (engine code M54B30)
Need 2 catalytic converter gaskets per vehicle.
Sold individually.

Ajusa exhaust catalyst gasket for Bmw x5:
Bmw x5 E70 :
- 3.0Si 6cyl 272hp from 05/2006 to 03/2010 (engine code n52b30n)
Need 2 catalytic converter gaskets per vehicle.
Sold individually.

This exhaust flange gasket for Citroën DS (1965-1975) is a reproduction.
This exhaust flange gasket for DS is located at the end of the manifold before the double primary tube, and is compatible with all models from vintage 65 onwards.

This exhaust flange gasket for Citroën ID (1965-1975) is a reproduction.
This exhaust flange gasket for ID is located at the end of the manifold before the double primary tube, and is compatible with all models from vintage 65 onwards.

Exhaust gasket for Peugeot 205 with TU engine
A "steel wool" typesealing ring that makes the connection between the front exhaust pipe and the intermediate pipe.
Assignments :- 1.0 XL, GL, Junior 954cm3 45hp (TU9) from 08/1987 to 07/1992- 1.0 XE, XR, Junior catalyzed 954cm3 50hp (TU9M/Z) from 08/1992 to 07/1995- 1.1 GL, XL, GR, XR 1124cm3 55hp (TU1) from 08/1987 to 07/1992- 1.1 XE, GE, XL, GL, XR, GR catalysed 1124cm3 60hp (TU1M/Z) from 08/1992 to 07/1995- 1.3 Rallye 1294cm3 103hp (TU24) from 08/1987 to 07/1992- 1.4 GR, SR, XR 1360cm3 65hp (TU3) from 08/1987 to 07/1988- 1.4 GR, SR, XR 1360cm3 69hp (TU3A) from 08/1988 to 07/1990- 1.4 GR, SR, XR 1360cm3 75hp (TU3F2) from 08/1990 to 07/1992- 1.4 GR, SR, XR Catalyzed 1360cm3 75hp (TU3M/Z) from 08/1992 to 12/1998- 1.4 GT, XS 1360cm3 85hp (TU3S) from 08/1987 to 07/1992
205 Cabriolet:- 1.1 CJ 1124cm3 55hp (TU1) from 08/1987 to 07/1992- 1.1 CJ Catalyzed 1124cm3 60hp (TU1M/Z) from 08/1992 to 07/1995- 1.4 CJ 1360cm3 65hp (TU3) from 08/1987 to 07/1988- 1.4 CJ 1360cm3 69hp (TU3A) from 08/1988 to 07/1990- 1.4 CJ 1360cm3 75hp (TU3F2) from 08/1990 to 07/1992- 1.4 Cabriolet 1360cm3 75hp (TU3M/Z) from 08/1992 to 07/1995