Brake master cylinder

For twin-circuit master cylinder
Diameter: 12 mm

For Beetle and variations, 08/1971->
from chassis no. 112 2000 001->

Exterior diameter : 16 mm
Interior diameter : 4 mm

For all Old Beetle models until ->07/1966
with master cylinders simple circuit
(until chassis N° ->116 1021 300)

Provides a seal between the brake fluid reservoir
and single-circuit master cylinder.
Dimensions: 22 x 27 mm

For VW VOLKSWAGEN Combi Split Brazil (1957-1975)

This master cylinder for 2cvs and derivatives -DOT4- M8 - 20.6mm is faithful to the original.
This brake master cylinder from the STOP brand with dual tank -DOT4- that fits with an 8mm spanner is original equipment. It is compatible with the 2cv saloons and derivatives with front brakes with drum and double tank.

Compatible models:
- 2cv4 AZL4 from 07/1976 to 07/1981
- 2cv6 AZL6 from 07/1976 to 07/1981
- 2cv AZU from 07/1976
- 2cv AKB AKS400 from 07/1976 to 08/1978
- Dyane 4 AYA2 from 06/1976
- Dyane 6 AYB from 07/1976 to 07/1977
- Mehari from 07/1976 to 07/1977

Warning!!! Your vehicle may have been modified, so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only DOT 4 or DOT 5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, and the wrong brake fluid could seriously damage your braking system.

This double jar master cylinder for 2CV (07/1976-07/1981) - 20.6mm is a quality reproduction.
This double jar brake master cylinder for 2CV for DOT4 fluid and 8 key is compatible with 2CV sedans and derivatives with Drum and double jar front brakes.

Compatible models:
- 2cv4 AZL4 from 07/1976 to 07/1981
- 2cv6 AZL6 from 07/1976 to 07/1981

Attention!!! Your vehicle may have been modified, check the wheel cylinder diameter and the wrench needed to tighten the brake hose ends.
Only use DOT 4 or DOT 5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, Using the wrong brake fluid could severely damage your brake system.

UROdouble-circuit brake master cylinder for MGB up to 1975.
Plastic jar for double circuitPlug supplied
For MG type B without brake assist, from 1968 to 1975

This brake master cylinder for ALPINE GTA (01/1985-12/1990) is a high quality remanufacture.

Made in Europe, this dual-circuit brake master cylinder for ALPINE GTA is faithful to the original ATE model.

Supplied with nuts and 2 screws, 1xM10 and 1xM12.

Compatible model :

- ALPINE GTA V6 GT, V6 2849cc (158hp), from 01/1985 to 12/1990
- ALPINE GTA V6 TURBO, V6 2458cc (185hp), from 01/1985 to 12/1990
- ALPINE GTA V6 TURBO, V6 2458cc (200hp), from 01/1988 to 12/1990

This brake master cylinder for Renault 25 (11/1985-12/1992) is a high quality remanufacture.

Made in Europe, this dual-circuit brake master cylinder for Renault 25 is faithful to the original ATE model. It has also been fitted as a master cylinder for Renault Sport Spider.

It comes complete with fixing nuts and 2 screw plugs, 1xM10 and 1xM12.

Compatible models :

- RENAULT 25 2.2L , 2165cc, (103hp), from 11/1985 to 03/1989
- RENAULT 25 2.2L , 2165cc, (108hp), from 09/1986 to 12/1992
- RENAULT 25 2.2L , 2165cc, (121hp), from 04/1984 to 12/1989
- RENAULT 25 2.2L , 2165cc, (124hp), from 04/1984 to 12/1989
- RENAULT 25 V6 Turbo 2.4L , 2458cc, (181hp), from 10/1984 to 05/1990
- RENAULT 25 V6 Turbo 2.5L , 2458cc, (205hp), from 01/1990 to 12/1992
- RENAULT 25 V6 2.7L , 2664cc, (141hp), from 04/1984 to 08/1989
- RENAULT 25 V6 2.8L , 2664cc, (156hp), from 06/1987 to 02/1990

- RENAULT SPORT SPIDER 2L ,1995cc, (147hp), from 12/1995 to 08/1996
- RENAULT SPORT SPIDER 2L 16V ,1995cc, (150hp), from 03/1995 to 10/1999

Brake master cylinder for Renault Caravelle and Floride

For Renault Caravelle:
- Renault Caravelle 1100 from 09/1963 to 06/1965 - Cléon-Fonte 1108cm3 55hp (688-02)
- Renault Caravelle 1100 S from 07/1965 to 07/1968 - Cléon-Fonte 1108cm3 58hp (688-03)

For Renault Floride :
- Renault Floride S from 03/1962 to 08/1963 - Sierra 956cm3 48hp (689-02)

For disc brakes
Original quality

Brake master cylinder for Renault Dauphine

For Renault Dauphine all models with drum brakes:
- Renault Dauphine (R1090) from 03/1956 to 06/1962 - Billancourt 845cm3 26hp
- Renault Dauphine (R1090) from 07/1962 to 06/1963 - Billancourt 845cm3 32hp
- Renault Dauphine Gordini (R1091) from 07/1957 to 12/1960 - Ventoux 845cm3 33hp
- Renault Dauphine Gordini (R1091) from 09/1962 to 09/1963 - Ventoux 845cm3 33hp

Original quality

Single-circuit master cylinder for compensatingtank to screwonto master cylinder
Varga quality
Diameter: 22.2 mm

Fits Brazilian VW Combi Split from 1957 to 1975.

This BENDIX type LPR brake master cylinder with three connections for Renault 5 - 19.05mm is made in Europe.
Based on the R12, it is compatible with a large number of Renault models contemporary with the R5.
For Renault 5 : - Renault 5 TL R1227/R1397 07/1979 to 12/1984 Cléon Fonte 1108cm3 45hp (688-713)- Renault 5 LS R1224 04/1974 to 06/1975 Cléon Fonte 1289cm3 64hp (810-725)- Renault 5 TS R1224/R1394 07/1975 to 12/1984 Cléon Fonte 1289cm3 64hp (810-725)- Renault 5 1300 Automatic R1225/R1395 01/1978 to 01/1981 Cléon Fonte 1289cm3 64hp (810-729)- Renault 5 TX R1229/R1399 09/1981 to 12/1984 Cléon Fonte 1397cm3 63hp (C2J-713)- Renault 5 Alpine R1223 03/1976 to 08/1981 Cléon Fonte 1397cm3 93hp (840-725)- Renault 5 Alpine Turbo R122B 09/1981 to 12/1984 Cléon Fonte 1397cm3 110hp (840-726)- Renault 5 1400 Automatic R1229/R1399 02/1981 to 12/1984 Cléon Fonte 1397cm3 63hp (847-712)- Renault 5 TX Automatic R1229/R1399 02/1981 to 12/1984 Cléon Fonte 1397cm3 63hp (847-712)
For Renault R12, R14, R15 TL/GTL, R18 and Fuego

Master cylinder 3 outlets diameter 19,05mm
The list of compatible models is given as an indication. Remember to check your braking system to identify the original assembly (Bendix or Girling) and compare the shape and dimensions of your master cylinder.

This LPR master cylinder for Alfa Romeo 33 type 905 (05-1983-12/1993) - 20.6mm is original equipment.

This double-circuit cast-iron master cylinder is original equipment for all Alfa 33 type 905 models.

This LPR brake master cylinder for Peugeot 404 (05/1960-08/1968) - 22mm is an excellent quality reproduction.
This LPR brake master cylinder for Peugeot 404 is single-circuit, and is compatible with early models without brake assist. Please refer to the technical specifications below.
Not suitable for Peugeot 404 equipped with hydrovac!

Master cylinder mounting separator tube
in the bulkhead spaced behind the pedal unit.
2 required per car, sold per unit.

For VW Beetle 1302 & 1303

Master cylinder brake light switch. 3-pole model.Brand ATESold individually.
For VW :- Cox and Karmann-Ghia since 08/1969.- Bay Window Combi from 10/1969 to 07/1979 from chassis N° 219 061 568.- Transporter T25 / T3 from 05/1979 to 07/1985

For all master cylinder double circuit 1968 ->

This LPR brake master cylinder for Peugeot 404 (08/1965-12/1971) - 25.4mm is an excellent quality reproduction.
This LPR brake master cylinder for Peugeot 404 is single-circuit, and is compatible with models with Hydrovac-assisted Bendix brake assist.Please refer to the detailed technical specifications below.