Brake master cylinder

23.8mm master cylinder for vehicles with left-hand drive,

For Seat Leon (1M):
- All models with ESP and the code mark: PR:1AT

Bendix dual circuitbrake master cylinder, diameter 23.8mm for Peugeot 406 1.8 16V 116hp
For EW7J4 engine only

Accessories and spare parts for "CUP" twin circuit master cylinder.
Top KERSCHER quality.
Composed of banjo fitting screw, "Y" fitting and 2 seals.

For VW without ABS brake assistance:
- Golf 1 Cabriolet since 90-> (chassis 15-L-015 001->)
- Golf 1 caddy Pick-up 92-> (chassis 14-N-000 001->)

This master cylinder for 2CV disc brakes (07/1981-07/1990) - 17.5mm is a quality remanufacture.

This brake master cylinder for 2CV with double jar and key of 8 is compatible with 2CV sedans and derivatives with front disc brakes and double jar. This master cylinder offers near-original quality.
Compatible models:- 2CV6 AK: 07/1981 to 07/1990
Warning!!! Your vehicle may have been modified. Check the diameter of the wheel cylinder and the wrench required to tighten the brake hose ends.Use only LHM brake fluid.LHM fluid is highly corrosive to parts not intended for its use. Using the wrong brake fluid could seriously damage your braking system.

This brake master cylinder for Mehari (07/1978- 07/1987) - 17.5mm is a quality remanufacture.
This brake master cylinder for Mehari with double jar and 8 key is compatible with 2CV sedans and derivatives with front disc brakes and double jar.

Compatible models:
- Mehari AY-CA : 07/1978 to 07/1987
- Mehari 4x4 AY-CE : 06/1979 to 06/1983

Attention!!! Your vehicle may have been modified, check the diameter of the wheel cylinder and the wrench needed to tighten the brake hose ends.
Only use LHM brake fluid.
LHM fluid is very corrosive to parts not intended for its use, using the wrong brake fluid could severely damage your brake system.

Brake master cylinder for models with ABS.
Diameter: 25.4 mm
Braking codes: 1AD, 1AE, 1LB, 1LU

For VW Transporter T4, 01/1996 ->06/2003
since chassis no. 70-T-200 001->

For Transporter Syncro (4 x 4), 05/1996 ->04/2003
since chassis no. 70-V-000 001->

This master cylinder for 2cvs and derivatives -DOT4- M8 - 20.6mm is faithful to the original.
This brake master cylinder from the STOP brand with dual tank -DOT4- that fits with an 8mm spanner is original equipment. It is compatible with the 2cv saloons and derivatives with front brakes with drum and double tank.

Compatible models:
- 2cv4 AZL4 from 07/1976 to 07/1981
- 2cv6 AZL6 from 07/1976 to 07/1981
- 2cv AZU from 07/1976
- 2cv AKB AKS400 from 07/1976 to 08/1978
- Dyane 4 AYA2 from 06/1976
- Dyane 6 AYB from 07/1976 to 07/1977
- Mehari from 07/1976 to 07/1977

Please note! Your vehicle may have been modified, so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only DOT 4 or DOT 5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, and the wrong brake fluid could seriously damage your braking system.

For Golf 3 without ABS:
- 1.4 60hp (ABD, AEX)
- 1.6 75hp (ABU, AEA)
- 1.9 Diesel 64hp (1Y, AEY)
- 1.9 Turbo Diesel 75hp (AAZ)
- 1.8 75hp (AAM) up to ->07/95
- 1.8 90hp (ABS, ADZ) up to ->07/95
- 1.6 75hp (AEE) from 05/96->

Complete assembly kit for master cylinder mounting
Consisting of 2 spacer tubes, 2 screws and washers
Located in the apron gap behind the crankset.
BBT production


for VW Beetle sedan and convertible 1302

This STOP single jar master cylinder for AMI6 (04/1961-12/1963) - 22.2 mm is original equipment quality.

This brake master cylinder for AMI6 with banjo brand STOP is an original equipment fitment. For DOT4 fluid vehicle with banjo mount.

Compatible Models:
- AMI 6 Sedan AM: 04/1961 to 12/1963


Warning!!! Your vehicle may have been modified, check the wheel cylinder diameter and the wrench needed to tighten the brake hose ends.
Use only DOT 4 or DOT 5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, Using the wrong brake fluid could severely damage your brake system.

For Golf 3 without ABS:
- 1.6 100hp (AEK, AFT)
- 1.8 75/90hp (AAM, ABS) from 07/95->
- 1.8 75/90hp (AAM, ADZ) with automatic gearbox, from chassis 1H-SB110001->, 1H-SP346941-> or 1H-SW430001->
- 1.9 TDi 90hp (1Z)
- 1.9 TDi 110hp (AFN)
- 2.0 107hp (AEP)
- 2.0 115hp (2E, AGG, ADY)
- 2.0 16s 150hp (ABF)

This master cylinder for Dyanes -DOT4- M8 - 20.6mm is a quality remanufacture.
This brake master cylinder from the STOP brand with dual tank -DOT4- that fits with an 8mm spanner is original equipment. It is compatible with the 2cv saloons and derivatives with front brakes with drum and double tank.

Compatible models:
- 2cv4 AZL4 from 07/1976 to 07/1981
- 2cv6 AZL6 from 07/1976 to 07/1981
- 2cv AZU from 07/1976
- 2cv AKB AKS400 from 07/1976 to 08/1978
- Dyane 4 AYA2 from 06/1976
- Dyane 6 AYB from 07/1976 to 07/1977
- Mehari from 07/1976 to 07/1977

Please note! Your vehicle may have been modified, so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only DOT 4 or DOT 5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, and the wrong brake fluid could seriously damage your braking system.

Brake master cylinder with fluid tank for:
- 356 pre-A 1.1 to 1.5 from 01/1950 to 12/1955
- 356 A 1.5 from 01/1955 to 12/1961
- 356 B 1.6 from 01/1959 to 12/1963

For Passat 32B,
from chassis ..-F-300 001 until->32-J-299 999

Brake master cylinder for Renault 5

For Renault 5 :
- Renault 5 L (R1221/R1391) from 01/1977 to 12/1983 - Billancourt 845cm3 38hp (800-710)
- Renault 5 LS (R1224) from 04/1974 to 06/1975 - Cléon Fonte 1289cm3 64hp (810-725)
- Renault 5 TS (R1224/R1394) from 07/1975 to 12/1984 - Cléon Fonte 1289cm3 64hp (810-725)
- Renault 5 TL (R1222/R1392) from 01/1972 to 12/1984 - Cléon Fonte 956cm3 46hp (689-710)
- Renault 5 TL (R1227/R1397) from 07/1979 to 12/1984 - Cléon Fonte 1108cm3 45hp (688-713)

Master cylinder 3 outlets diameter 19,05mm

The list of compatible models is given for information only. Remember to check your braking system to identify the original assembly (Bendix or Girling) and compare the shape and dimensions of your master cylinder.

For TRW master cylinder with accordion boot

For VW Beetle, Karmann-Ghia
Years: from 10/1966->
Chassis: from no. 117 384 751->

Dual-circuit master cylinder
Original model
Piston diameter: 19.05 mm

For VW Type 3 all models (08/1966-)

This single jar master cylinder for 2CV van AK (10/1967-06/1968)- M9 - 20.6mm is a quality reproduction of the original STOP model.

This master cylinder for 2CV AK was fitted over a short period of time on vans, early Dyanes and Meharis and some AMI6 and AMI8.

Check compatibility by measuring the piston diameter and threads of your original master cylinder.

Compatible models:

- 2CV AK 350 type AK: 10/1967 to 06/1968
- 2CV AZU type AZU-A: 10/1967 to 06/1968

Attention!!! Your vehicle may have been modified, check the diameter of the wheel cylinder and the wrench needed to tighten the brake hose ends.
Only use a DOT 4 or DOT 5 brake fluid.
The LHM fluid is very corrosive to parts that are not intended for its use, Using the wrong brake fluid could severely damage your brake system.

22.2 mm master cylinder, mounted without servo brake
Supplied without inlet seals.

For Combi Bay Window, 08/1967 ->07/1969
up to chassis N°->219 300 000.