Brake master cylinder

This master cylinder for Meharis -DOT4- M8 - 20.6mm is a quality remanufacture.
This brake master cylinder from the STOP brand with dual tank -DOT4- that fits with an 8mm spanner is original equipment. It is compatible with the 2cv saloons and derivatives with front brakes with drum and double tank.

Compatible models:
- 2cv4 AZL4 from 07/1976 to 07/1981
- 2cv6 AZL6 from 07/1976 to 07/1981
- 2cv AZU from 07/1976
- 2cv AKB AKS400 from 07/1976 to 08/1978
- Dyane 4 AYA2 from 06/1976
- Dyane 6 AYB from 07/1976 to 07/1977
- Mehari from 07/1976 to 07/1977

Please note! Your vehicle may have been modified, so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only DOT 4 or DOT 5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, and the wrong brake fluid could seriously damage your braking system.

This single jar master cylinder for AMI6 and AMI8 (12/1963-07/1969)- M9 - 20.6mm is a quality reproduction of the original STOP model.

This master cylinder for AMI was fitted over a short period of time on vans, early Dyanes and Meharis, some AMI6s and early AMI8s.

Check compatibility by measuring the piston diameter and threads of your original master cylinder.

Compatible models:

- AMI 6 Sedan type AM/AM2: 12/1963 to 03/1969
- AMI 6 Estate type AMB/AMB2: 10/1964 to 07/1969
- AMI 8 Sedan type AM3/AM-JA: 03/1969 to 07/1969

Attention!!! Your vehicle may have been modified, check the wheel cylinder diameter and the wrench needed to tighten the brake hose ends.
Only use DOT 4 or DOT 5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, Using the wrong brake fluid could severely damage your brake system.

This single jar master cylinder for 2CV van AK (10/1967-06/1968)- M9 - 20.6mm is a quality reproduction of the original STOP model.

This master cylinder for 2CV AK was fitted over a short period of time on vans, early Dyanes and Meharis and some AMI6 and AMI8.

Check compatibility by measuring the piston diameter and threads of your original master cylinder.

Compatible models:

- 2CV AK 350 type AK: 10/1967 to 06/1968
- 2CV AZU type AZU-A: 10/1967 to 06/1968

Attention!!! Your vehicle may have been modified, check the diameter of the wheel cylinder and the wrench needed to tighten the brake hose ends.
Only use a DOT 4 or DOT 5 brake fluid.
The LHM fluid is very corrosive to parts that are not intended for its use, Using the wrong brake fluid could severely damage your brake system.

This master cylinder for Dyane and Acadiane disc brakes (07/1978-03/1987) 17.5mm is a quality remanufacture.
This brake master cylinder for DYANE and ACADIANE with double jar and 8 key is compatible with 2CV sedans and derivatives with front disc brakes and double jar. This master cylinder offers near-original quality.
Compatible models:- Acadiane AY-CD : 07/1978 to 03/1987- Dyane 6 AYB/AY-CB : 07/1978 to 08/1983
Warning!!! Your vehicle may have been modified. Check the diameter of the wheel cylinder and the wrench required to tighten the brake hose ends.Use only LHM brake fluid.LHM fluid is highly corrosive to parts not intended for its use, and using the wrong brake fluid could seriously damage your braking system.

This STOP single jar master cylinder for AMI6 (04/1961-12/1963) - 22.2 mm is original equipment quality.

This brake master cylinder for AMI6 with banjo brand STOP is an original equipment fitment. For DOT4 fluid vehicle with banjo mount.

Compatible Models:
- AMI 6 Sedan AM: 04/1961 to 12/1963


Warning!!! Your vehicle may have been modified, check the wheel cylinder diameter and the wrench needed to tighten the brake hose ends.
Use only DOT 4 or DOT 5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, Using the wrong brake fluid could severely damage your brake system.

This single jar master cylinder for 2CV Fourgonnette AZU (03/1963-01/1972) - 22.2 mm is a quality reproduction.

This brake master cylinder for 2CV AZU with Banjo mount DOT4 fluid in the front and 4.5mm keyed 9 in the rear. it is compatible with 2CV AZU Vans before January 1972.

Compatible models:
- 2CV AZU: 03/1963 to 01/1972

Warning!!! Your vehicle may have been modified, check the diameter of the wheel cylinder and the wrench needed to tighten the brake hose ends.
Only use DOT 4 or DOT 5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, Using the wrong brake fluid could severely damage your brake system.

This STOP single jar master cylinder for 2CV Van (03/1951-03/1968) - 22.2 mm is original quality.

This brake master cylinder for 2CV Van with banjo brand STOP is an original fit. For DOT4 Fluid vehicle with Banjo mount.It is compatible with 2CV sedans and derivatives with Drum and single jar front brakes.

Compatible models:
- 2CV AU: 03/1951 to 07/1956
- 2CV AZU: 10/1954 to 03/1963
- 2CV AK 350: 03/1963 to 06/1968

Attention!!! Your vehicle may have been modified, check the wheel cylinder diameter and the wrench needed to tighten the brake hose ends.
Only use DOT 4 or DOT 5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, Using the wrong brake fluid could severely damage your brake system.

This single jar master cylinder for Dyane (08/1967-01/1969)- M9 - 20.6mm is a quality reproduction of the original STOP model.

This master cylinder for Dyane was fitted over a short period of time on vans, early Dyans and Meharis and some AMI6 and AMI8.

Be sure to check for compatibility by measuring the piston diameter and threads of your original master cylinder.

Compatible models:

- DYANE (425) type AYA: 08/1967 to 01/1969
- DYANE 4 type AYA2: 03/1968 to 01/1969
- DYANE D6 type AYA3: 01/1968 to 01/1969
- DYANE 6 type AYA3/AYB/AY-CB: 05/1968 to 01/1969

Warning!!! Your vehicle may have been modified, check the wheel cylinder diameter and the wrench needed to tighten the brake hose ends.
Only use DOT 4 or DOT 5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, Using the wrong brake fluid could severely damage your brake system.

Kerscher assembly kit for VH25203 kit

Accessories and spare parts for "CUP" twin circuit master cylinder.
Top KERSCHER quality.
Composed of banjo fitting screw, "Y" fitting and 2 seals.

Protective rubber gaiter for master cylinder rod.

For VW Beetle, Karmann-Ghia
Years: until ->10/1966
Chassis: up to no. -> 117 384 750.

For TRW master cylinder with accordion boot

For VW Beetle, Karmann-Ghia
Years: from 10/1966->
Chassis: from no. 117 384 751->

Dual circuit brake master cylinder
Diameter: 19,05 mm
Economic standard quality
Left hand drive only.

For Old Beetle 1302 & 1303
since 08/1970->
since chassis N° 111 2000 001->

This master cylinder for 2CV disc brakes (07/1981-07/1990) - 17.5mm is a quality remanufacture.

This brake master cylinder for 2CV with double jar and key of 8 is compatible with 2CV sedans and derivatives with front disc brakes and double jar. This master cylinder offers near-original quality.
Compatible models:- 2CV6 AK: 07/1981 to 07/1990
Warning!!! Your vehicle may have been modified. Check the diameter of the wheel cylinder and the wrench required to tighten the brake hose ends.Use only LHM brake fluid.LHM fluid is highly corrosive to parts not intended for its use. Using the wrong brake fluid could seriously damage your braking system.

Servo brake gasket for MX5 NA NB NBFL NC NCFL

- This gasket isolates the servo brake from the engine apron where it is attached
- Genuine Mazda® part

This LPR brake master cylinder for Peugeot 204 and 304 (04/1965-10/1980) - 19.05mm - M10x1 is an excellent quality reproduction.
This LPR brake master cylinder for Peugeot 204, 304 and 305 is compatible with a large number of 204 and 304 models (see serial numbers below). It continued its career on 305 sedans and station wagons.
Compatible models :
PEUGEOT 204 04/1965-06/1976- PEUGEOT 204 BREAK DIESEL; Diesel 5hp ; XLD 1255 cm3 40 hp ; 1968-1973 from serial number 7987371- PEUGEOT 204 BREAK DIESEL; Diesel 5hp; XL4D 1357 cm3 45 hp; 1973-1976 from serial number 8341274- PEUGEOT 204 CABRIOLET; Petrol 6hp; XK4 1130 cm3 55 bhp; 1969-1970 all models- PEUGEOT 204 COUPÉ 2+2 ; Petrol 6hp ; XK4 1130 cm3 55 bhp ; 1969-1970 all models- PEUGEOT 204 GL ; Petrol 6hp ; XK 1130 cm3 53 bhp ; 1965-1969 from serial number 9254615- PEUGEOT 204 GL ; Petrol 6hp ; XK4 1130 cm3 55 bhp ; 1970-1974 from serial number 9254615- PEUGEOT 204 GL ; Petrol 6hp ; XK5 1130 cm3 59 bhp ; 1975-1976 from serial number 9254615- PEUGEOT 204 LD ; Diesel 5hp ; XL4D 1357 cm3 45 bhp ; 1975-1976 all models
PEUGEOT 304 10/1969-10/1980- PEUGEOT 304 ; Petrol 7hp ; XL3 1288 cm3 65 c ; 1970-1976 from serial number 3733770- PEUGEOT 304 ; Petrol 7hp ; XL5 1290 cm3 65 hp ; 1976-1979 from serial number 3733770- PEUGEOT 304 BREAK GLD ; Diesel 5hp ; XL4D 1357 cm3 45 hp ; 1977-1979 all models- PEUGEOT 304 BREAK GLD ; Diesel 6hp ; XID 1548 cm3 47 bhp ; 1980-1980 all models- PEUGEOT 304 CABRIOLET ; Petrol 7hp ; XL3 1288 cm3 65 bhp ; 1970-1972 all models- PEUGEOT 304 CABRIOLET S ; Petrol 7hp ; XL3S 1288 cm3 74,5 bhp ; 1973-1975 all models- PEUGEOT 304 COUPÉ 2+2 ; Petrol 7hp ; XL3 1288 cm3 65 bhp ; 1970-1973 all models- PEUGEOT 304 COUPÉ 2+2 S ; Petrol 7hp ; XL3S 1288 cm3 74.5 bhp ; 1973-1975 all models- PEUGEOT 304 GLD ; Diesel 5hp ; XL4D 1357 cm3 45 bhp ; 1977-1979 from serial number 3733770- PEUGEOT 304 S ; Petrol 7hp ; XL3S 1288 cm3 74,5 bhp ; 1972-1976 all models- PEUGEOT 304 SLS ; Petrol 7hp ; XL5S 1290 cm3 74,5 bhp ; 1977-1978 from serial number 3733770 onwards
PEUGEOT 305 (1977-1988)

Master cylinder 23.81mm for double circuit for VW Combi Bay Window from 08/1970 to 07/1979 from chassis n° 211 2000 001 not equipped with servo brake.

Ridex brake cylinder master for Bmw 3 Series :
- Compatible with all Bmw 3 Series E30 Sedan, Touring, Coupé and Cabriolet versions from 01/1982 to 02/1994 with 4 and 6-cylinder petrol and diesel engines except sport model type M3 E30.
Type :
- 316 - 316i- 318i- 320i- 325i- 325ix
Please note
- There are 2 different assemblies. Check the original part number on your master cylinder or its dimensions .

This LPR dual circuit brake master cylinder for Renault 4 (10/1976-07/1982) - 20.64mm is European made.
This LPR master cylinder for R4 with 20.6mm piston is dual circuit. It has 3 outlets and a built-in valve. It served as a transitional model before the arrival of disc brakes in 1982 on R4s with Cléon engines.
Compatible models:
- R4 GTL type R1128 : 10/1977 to 07/1982
- R4 F6 extended van type R2370 : 10/1976 to 06/1982- R4 F6 Pick up type 3C2370 : 07/1978 to 06/1982- R4 R2430 long glass van : 10/1976 to 06/1982

TRW brakemaster cylinder for Bmw 3 Series :
Bmw 3 Series E30 Sedan :
- 316 1.8L 90hp phase 1 from 03/1983 to 08/1987 (engine code M10B18)- 316i 1.8L 90hp phase 2 from 09/1987 to 07/1988 (engine code M10B18)- 316i 102hp phase 2 from 07/1987 to 12/1990 (engine code M40B16)- 318i 105hp phase 1 from 02/1983 to 08/1987 (engine code M10B18i)- 318i 115hp phase 2 from 09/1987 to 04/1991 (engine code M40B18i)- 320i 6cyl 125hp phase 1 from 01/1983 to 08/1985 (engine code M20B20)- 320i 6cyl 129hp phase 1 from 09/1985 to 08/1987 (engine code M20B20)- 320i 6cyl 129hp phase 2 from 09/1987 to 02/1991 (engine code M20B20)- 324d 6cyl 86hp phase 1 from 04/1985 to 08/1987 (engine code M21D24)- 324d 6cyl 86hp phase 2 from 09/1987 to 12/1990 (engine code M21D24)
Bmw 3SeriesE30 Coupé :
- 316 1.8L 90hp phase 1 from 03/1982 to 08/1987 (engine code M10B18)- 316i 1.8L 90hp phase 2 from 09/1987 to 07/1988 (engine code M10B18)- 316i 102hp phase 2 from 09/1987 to 04/1991 (engine code M40B16)- 318i 105hp phase 1 from 03/1982 to 08/1987 (engine code M10B18i)- 318i 115hp phase 2 from 09/1987 to 04/1991 (engine code M40B18i)- 320i 6cyl 125hp phase 1 from 01/1982 to 08/1985 (engine code M20B20)- 320i 6cyl 129hp phase 1 from 09/1985 to 08/1987 (engine code M20B20)- 320i 6cyl 129hp phase 2 from 09/1987 to 04/1991 (engine code M20B20)
Worth knowing:
- There are 2 different assemblies. Check the original reference on your master cylinder or its dimensions .