Brake calipers

For Audi A3 8L with brake code :
- PR: 1KK, 1KV

Calliper without part exchange (no returning your old part)

Compatible with Seat Ibiza type 6L, with front axle code: PR-1ZF or 1LQ

If you have difficulty identifying your equipment codes, please contact us with your chassis number under point (E) of your vehicle registration document.

Brake caliper rear right for Porsche 911 and 912 :

-> Porsche 912 :
- 912 1.6 from 1965 to 1968

-> Porsche 911 :
- 911 2.0 from 1965 to 1968
- 911 2.0 T from 1968

Supplied without the retaining pins and springs to hold pads

This caliper mounts on Porsche with solid brake disc (unventilated)

Reconditioned GIRLING front right brake caliper (original caliper)Supplied without pads.Piston diameter: 60 mm.Version with 1 bleeder per caliper.Please check this information on your caliper before ordering.
For VW :- Transporter T25 / T3 from 08/1986 to 09/1992

Retaining pin of brake pad for Porsche 911 from 1967 to 1973, equipped with standard front brake calipers for solid brake disc :

-> Porsche 911 :
- 911 2.0 from 1965 to 1968
- 911 2.0 T from 1968 to 1969 with solid brake disc

-> Porsche 912 :
- 912 1.6 from 1965 to 1969

Genuine Porsche part

Required quantity per caliper : 2

Reconditioned front left brake caliper for Bmw 5 Series :
Bmw 5 Series E34 Sedan :
- 518i 4cyl 113hp phase 1 from 04/1989 to 05/1994 (engine code M40B18)- 518i 4cyl 115hp phase 2 from 11/1993 to 12/1995 (engine code M43B18)- 520i 129hp phase 1 from 06/1987 to 04/1990 (engine code M20B20)- 520i 150hp phase 1 from 05/1990 to 08/1992 (engine code M50B20)- 520i 150hp phase 1 from 09/1992 to 03/1994 (engine code M50B20TU)- 520i 150hp phase 2 from 04/1994 to 12/1995 (engine code M50B20TU)- 524td 115hp phase 1 from 07/1987 to 08/1991 (engine code M21D24)- 525td 115hp phase 1 from 12/1992 to 03/1994 (engine code M51D25)- 525td 115hp phase 2 from 04/1994 to 11/1995 (engine code M51D25)- 525tds phase 1 143hp from 02/1990 to 03/1994 (engine code M51D25)- 525tds phase 2 143hp from 04/1994 to 12/1995 (engine code M51D25)

Brake caliper bleeder plug for Porsche 911 type 964 from 1989 to 1994 :

- 964 3.6 - 250hp (M64.01/02) Carrera 2 from 1990 to 1994
- 964 3.6 - 250hp (M64.01) Carrera 4 from 1989 to 1994
- 964 3.6 - 260hp (M64.03) Carrera RS from 1992
- 964 3.6 - 250hp (M64.03) Carrera RS America from 1992
- 964 3.3 - 320hp (M30.69) Turbo from 1991 to 1992
- 965 3.6 - 360hp (M64.50) Turbo from 1993 to 1994

The cap is sold individually, and 8 quantities are required per vehicle.

This reconditioned GIRLING right front caliper for Renault 4L- Aluminium 45mm is an original reconditioned part.
This right front brake caliper for Renault 4L is an original cast aluminum part. It has been reconditioned in strict compliance with the original by our partner.Our reconditioned calipers benefit from the highest quality reconditioning available on the market. Disassembly, inspection, identification, cleaning and bead-blasting, new inspection, surface treatment, new inspection, engraving, automatic replacement of all components other than the cast body, even the pistons, everything is carried out by our ISO 90001-certified partner.
Compatible models:- R4 type R1123 : 12/1963 to 05/1986- R4 GTL type R1128 : 10/1977 to 12/1993- R4 Savane type R112C : 09/1986 to 12/1992- R4 Fourgonnette F4 type R2391 : 09/1972 to 05/1986- R4 5HP van type R2106 : 03/1966 to 05/1986- R4 F6 extended van type R2370 : 05/1975 to 11/1985- R4 F4 type R210B : 09/1981 to 05/1990- R4 F4 station wagon type 239B : 09/1981 to 05/1990
Return and refund conditions for consigned parts
Your old part must be returned in the same box as the new one. Simply affix the postal return label, pre-addressed to MECATECHNIC, which you will receive with your reconditioned caliper, and return it to us. This will speed up the processing and reimbursement of your deposit.Please note the following conditions for returning your deposit:- The returned caliper must correspond exactly to the one originally fitted on the vehicle and be clearly identifiable by its part number and OEN.- It must be drained of all brake fluid, and be complete, with no peripheral parts. No hoses, no parts from the running gear (steering knuckles, connecting rods, etc.).- Bolts, clamps, connection screws and bleed screws must be present in the package.- The cast iron of the returned caliper must not have undergone excessive corrosion, must not have been machined or drilled, and must not be broken or show any visible cracks.- Each caliper will be individually inspected three times: on receipt of the consignment by MECATECHNIC, before shipment to our partner, on receipt by our partner, before cleaning and reconditioning (NB: During galvanizing, major defects (micro-cracks) may appear that were previously undetectable. Our customer service department will contact you to find the best solution).
Only stirrups meeting the above-mentioned reconditioning requirements can be reconditioned and will be credited. MECATECHNIC will take 6 to 8 weeks to check your caliper once it has been received. We will inform you by e-mail of the results of the successive checks and whether or not the deposit paid will be refunded.

This BENDIX front left caliper for Renault 5 Alpine - Aluminum is original equipment.
Original equipment for Renault 5 sports cars, Renault 12 and Renault 17.
Renault 5- 1.4 Alpine R1223 1397cc, 93hp (09/1977-09/1981)- 1.4 Alpine Turbo R1223 1397cc, 108hp (10/1981-01/1985)
Renault 12- 1.3 R1170 1289cc, 54hp (10/1969-08/1980)- 1.3TS R1177 1289cc, 54hp (08/1972-08/1980)- 1.4 1397cc, 67hp (08/1976-05/1979)- 1.6 Gordini 1565cc,113hp (08/1970-12/1974)
Renault 17- 1.6 1565cc, 90hp (03/1972-10/1980)

For Polo 9N1 and 9N3
with front axle reference code on service book:
- PR-1LQ, 1LR, 1ZF, 1ZG, 1ZJ

RIDEX rear left caliper for Volkswagen Golf 4
For VW Golf 4 with code 1KY, 1KU and 2EE ( Rear disc 256x22mm) :- 1.8T GTI 180hp (AUQ, BEK)- 1.9 TDI 90hp (AGR, ALH)- 2.3 V5 170hp (AQN)- 2.3 V5 4Motion 170hp (AQN)- 2.8 V6 4Motion 204hp (AQP, AUE, BDE)- 3.2 R32 4Motion 241hp (BFH, BML)
Left side (driver)

This left caliper cooler for Dyane and Acadiane (08/1977-03/1987) is a quality reproduction.

This brake disc cooler for Dyane and Acadiane is true to the original. It ensures the cooling of the left front brake disc

A brake caliper refurbishment kit is designed to restore the brake calipers on your Combi. The brake caliper is an essential part of the braking system, holding the brake pads in place and applying the pressure needed to stop the vehicle.Over time, calipers can corrode, seize up or lose their effectiveness, and refurbishment can be more economical than complete replacement.
This ATE or VARGA front brake caliper refurbishment kit is suitable for VW Combi Bay Window from 08/1971 to 07/1972 and chassis n°2112000001 to n°2122300000.
Fixed double-piston model.

Calliper without part exchange (no returning your old part)

Compatible with Seat Altea type 5P including XL version, with front axle code: PR-1ZF

If you have difficulty identifying your equipment codes, please contact us with your chassis number under point (E) of your vehicle registration document.

Brake caliper rear right for Porsche 356 C and SC :

- 356 C 1600 - 75 hp (616/15) from 1964 to 1965
- 356 SC 1600 - 95 hp (616/16) from 1964 to 1965

Also suitable for Carrera versions

Supplied without the retaining pins and springs to hold pads

This caliper mounts on Porsche with solid brake disc (unventilated)

This DELPHI 4 piston front right caliper for LAND ROVER DEFENDER (08/1990-02/2016) - 41 mm is original type.

This brand new DELPHI 4 piston 41mm caliper fits on the right front of LAND ROVER DEFENDER with AP LOCKHEED mounting.

LAND ROVER DEFENDER Station Wagon (L316)
- 2.5 TDI 4x4 (L316) (1990/08-1998/12)
- 3.9 V8 4x4 (L316) (1998/11-2016/02)
- 2.5 Td5 4x4 (L316) (1998/06-2016/02)
- 2.5 4x4 (1990/09-1994/12)

LAND ROVER DEFENDER Cabrio (L316)
- 2.5 TDI 4x4 (L316) (1990/08-1998/11)
- 2.5 Td5 4x4 (L316) (1998/06-2016/02)
- 2.5 D 4x4 (L316) (1990/09-1994/07)

LAND ROVER DEFENDER Pick Up (L316)
- 2.5 Td5 4x4 (L316) (1998/06-2016/02)

Right front brake caliper for original GIRLING mounting for VOLKSWAGEN Transporter T25 / T3 / Bus from 06/1986 to 07/1992 (including synchro) from chassis n°24-G-120001.

For A3 (8L)
with front axle reference code on the maintenance and service booklet:
- PR-1LQ, 1LR, 1LS, 1ZP

for A3 (8P)
with front axle reference code on the maintenance and service booklet:
- PR-1ZF, 1ZM

This left brake disc cooler for 2cv (06/1981-07/1990) is a quality reproduction.

This brake disc cooler for 2CV is true to the original. It provides cooling for the left front brake disc.

Right rear brake caliper for Audi A3 8P Sedan, Cabriolet and Sportback phase 2 :

- All petrol and diesel models from 04/2008 to 05/2013 with brake code 1KS ( BOSCH mounting on 272x10mm solid brake discs with 5x112 spacing) -> up to chassis number WAUZZZ8PZD-250000

Technical specifications :
- Piston diameter: 38mm
- Color: gray
- Bleed screw included

This caliper is sold new without exchange of your old part (no deposit).