Brake calipers

Rear left calliper for VOLKSWAGEN Transporter T5 all versions and engines.

Set of guide bushings without guide bolt for front brake caliper for Peugeot 205 GTI 1.9 L

These guide bushings for 205 GTI with higher quality than the original are from MEYLE Original Quality.

These bushings have significantly higher durability compared to original type guide bushings.

They only fit these GTI models in Phase II:

- 205 GTI 1.9 L - 120hp from 10/1987 to 10/1994
- 205 GTI 1.9 L - 128hp from 10/1987 to 09/1998

Also suitable for a utility version:

- 205 Van 1.7 L Diesel - 60hp from 03/1994 to 05/1997

Guide bolt not included.

Right-hand rear brake calliper for Porsche 911 :

- 911 3.2 from 1984 to 1989

Brand new brake caliper ATE

This BENDIX left front caliper for Alfa Romeo 33 type 905 (05/1983-12/1989) - 48 mm is original.
This original single piston left front caliper for Alfa 33 type 905 is compatible with first series models equipped with a Bendix type brake system.
ALFA ROMEO 33 (905_)- 1.2 (905.A) (1983/06-1989/12)- 1.3 (905.A1B, 905.A1C, 905.A1G) (1983/06-1989/12)- 1.3 (905.A1A, 905.A1C, 905.A1D, 905.A1F, 905.A1H) (1984/10-1989/12)- 1.5 (905.A2A) (1983/05-1987/12)- 1.5 (905.A2) (1986/07-1989/12)- 1.5 QV (905.A2N, 905.A2V) (1984/06-1989/12)- 1.5 4x4 (905.A2F) (1985/01-1986/09)- 1.5 4x4 (905.A2M, 905.A2T) (1986/09-1989/12)- 1.5 (905.A2G) (1983/06-1986/12)- 1.5 4x4 (905.A2A) (1984/01-1989/12)- 1.5 (905A1) (1983/05-1993/12)- 1.3 (905A1) (1983/05-1989/12)
ALFA ROMEO ARNA (920_)- 1.2 (920.AA) (1985/01-1986/12)- 1.2 (920.AB, 920.AC) (1985/01-1986/12)- 1.3 TI (920.A1B) (1983/03-1986/12)- 1.5 (920A2B) (1985/01-1986/12)- 1.2 (920AC, 920AA) (1983/03-1986/12)

This right front caliper for LANCIA DELTA (01/1986-12/1991)- 48mm is original equipment.
This Girling cast iron single piston right front caliper is an original equipment.
Compatible models:LANCIA DELTA I (831_)- 1.6 HF Turbo (831AB.020S) (1987/04-1989/03)- 2.0 HF Integrale (831AB.024) (1987/10-1991/12)- 1.6 HF Turbo (831AB.020) (1986/08-1988/08)- 2.0 HF Integrale (831AB.019) (1986/11-1988/08)- 1.1 (831AB.015) (1986/01-1990/12)

This GIRLING right rear caliper for SAAB 99 (10/1970-12/1984) - 2 pistons is original equipment.

This 27mm 2-piston right rear caliper is compatible with GIRLING-mounted SAAB 99 models.

Compatible models: All models except Turbo

FERODO front left brake caliper for Bmw 3 Series:
- Compatible with all Bmw 3 Series E30 Sedan, Touring, Coupé and Cabriolet versions from 01/1982 to 05/1993 only with ATE original equipment ABS system, except for M3 E30 engine code s14.
New brake caliper without exchange.

Pair of complete WILWOOD "silver-gray" brake calipers
High-efficiency dual-piston calipers
Left and right front mounting to replace original calipers, without special brackets or adapters.
Thinner, lighter and more efficient than conventional calipers.
Competition-quality calipers in anodized aluminum and stainless steel pistons.
Supplied with Wilwood Premium pads.

- For VW Cox, Karmann-Ghia, (08/1966-)
- For VW Type 3, (08/1965 -03/1971)

Complete refurbishment kit for 1 front brake calliper specific to the ventilated disc brake kits produced by German brand KERSCHER.
Model with rectangular pads with 2 lugs and pistons with a 42 mm diameter.

Pairof 2 front brake calipers Left Right complete
Make: TRW
German quality equivalent to the original.
Painted red Epoxy high temperature
Delivered with pads TRW / ATE

- For VW Beetle, Karmann-Ghia, (08/1966-)
- For VW Type 3, (08/1965-03/1971)
- For VW Kübel 181 (08/1969-12/1979)

Complete renovation kit for ATE brake calliper
version with square brake pads with 1 wing
For Beetle, Karmann-Ghia & Type 3 up to->07/1971

Jp Group right front brake caliper for Bmw 3 Series:
- Compatible with all Bmw 3 Series E36 Sedan, Touring, Compact, Coupé and Cabriolet versions from 11/1989 to 08/2000 with all 4- and 6-cylinder petrol and diesel engines.
Type :
- 316i m43- 318i m40 m42 m43 m44- 320i m50 m50tu m52- 323i m52- 325i m50 m50tu- 328i m52- 318 Tds m41- 325 Td Tds m51
Please note:
- Not suitable for sport version type M3 E36.- Not suitable for 4-cylinder petrol engines with engine code m40 type 316i.- Only suitable for 4-cylinder petrol engines with option code S100A payload.- Only suitable with 22mm brake disc .

Front left brake caliper for Porsche 914-4 from 1972 to 1976 :
- 914-4 1.7 - 80 hp (022-W) from 1972 to 1973- 914-4 1.7 - 80 hp (022-EA) from 1972 to 1973- 914-4 1.7 - 72 hp (022-EB) from 1972 to 1973- 914-4 1.8 - 85 hp (021-AN) from 1974 to 1976- 914-4 1.8 - 76 hp (022-EC) from 1974 to 1976- 914-4 2.0 - 95 hp (039-GA) from 1973 to 1974- 914-4 2.0 - 100 hp (039-GB) from 1973 to 1976- 914-4 2.0 - 88 hp (039-GC) from 1975 to 1976
Mounting center distance: 77mm

This reconditioned ATE type A right front caliper for Porsche 911 (09/1968-08/1984) - 48mm is an original reconditioned part.

This right front caliper type A for Porsche 911 is made of steel. This two-piston brake caliper is an original part that has been refurbished in strict compliance with the original by our partner.

Compatible models:

- 911 2.0 E, type 911.09/11 (09/68-12/69) 1991cm3, 140hp
- 911 2.0 S, type 901.10 (09/68-12/69) 1991cm3, 170hp
- 911 2.2 E, type 911.01/04 (09/69-12/71) 2195cm3, 155hp
- 911 2.2 S, type 911.01/02 (09/69-12/71) 2195cm3, 180hp
- 911 2.4 E, type 911.52/62 (08/71-12/73) 2341cm3, 165hp
- 911 2.4 S, type 911.53/63 (08/71-01/76) 2341cm3, 190hp
- 911 2.7 S, Carrera type 911.93/98 (08/73-01/76) 2687cm3, 175hp
- 911 2.7 SC, Carrera RS type 911.83 (08/72-01/79) 2687cm3, 209hp
- 911 3.0 SC, Carrera type 930.03/13 (07/77-06/80) 2994cm3, 180hp
- 911 3.0 SC, Carrera type 930.09/19 (09/79-06/80) 2994cm3, 188hp
- 911 3.0 SC, Carrera type 930.02/12 (09/75-06/77) 2994cm3, 200hp
- 911 3.0 SC, Carrera type 930.04/06/07/16 (03/74-10/83) 2994cm3, 209hp
- 911 3.0 SC, type 930.10 (08/80-07/83) 2994cm3, 204hp
- 911 3.2 SC, Carrera type 930.20 (08/83-08/84) 3164cm3, 231hp


Our reconditioned calipers benefit from the highest quality reconditioning available on the market. Disassembly, inspection, identification, cleaning and bead-blasting, rechecking, surface treatment, rechecking, engraving, automatic replacement of all components other than the cast body, even the pistons, all carried out by our ISO 90001-certified partner.

This ATE left front caliper for Alfa Romeo 33 1.7 QV with ABS (01/1986-09/1994) - 48 mm is original.

This is the original ATE single piston front left caliper for the highest performance Alfa 33 equipped with ABS braking system.

ALFA ROMEO 33 (905)
- 1.7 i.e. (905.A3D) (1988/09-1989/12)
- 1.7 QV (905.A3) (1988/03-1989/12)
- 1.8 TD (905A4) (1986/01-1990/06)
- 1.7 (905A2A) (1986/01-1989/12)
- 1.7 (905A3) (1986/01-1990/06)
- 1.7 i.e. 4x4 (905A3G, 905B3F) (1988/09-1989/12)
- 1.7 i.e. (905B3F) (1988/09-1989/12)
- 1.7 (905B3C) (1988/03-1989/12)

ALFA ROMEO 33 (907)
- 1.7 16V (907.A1C) (1990/01-1992/03)
- 1.7 16V 4x4 (907.A1G) (1990/01-1994/09)
- 1.7 16V 4x4 (907A1F) (1990/01-1994/09)
- 1.7 16V 4x4 (907.B1H) (1990/01-1992/03)
- 1.7 i.e. 4x4 (907.B1E) (1990/01-1992/03)
- 1.7 i.e. 4x4 (907B1D) (1992/04-1994/09)

This right rear caliper for Citroën Méhari 4x4 (06/1979-10/1987) is an original reconditioned part.

This reconditioned right rear caliper for Citroën Méhari 4x4 is an original part. It has been reconditioned in strict compliance with the original by our partner.

Our reconditioned calipers benefit from the highest quality reconditioning available on the market. Disassembly, inspection, identification, cleaning and bead-blasting, rechecking, surface treatment, rechecking, engraving, automatic replacement of all components other than the cast body, even the pistons, are all carried out by our ISO 90001-certified partner.

For Citroën Mehari :
- Mehari 4x4 type AY-CE (06/1979-10/1987) 602cm3 29hp

Front brake caliper upper spring plate for Porsche 911 type G Turbo and Turbo Look from 1984 to 1989:

- 911 Carrera 3.2 from 1984 to 1989 only with Turbo-Look option (option code M491)
- 911 Turbo 3.3 from 1983 to 1989

The spring plate is sold individually and is suitable for both left and right sides.

Rear brake caliper upper spring plate for Porsche 911 type G Turbo and Turbo Look from 1984 to 1989:

- 911 Carrera 3.2 from 1984 to 1989 only with Turbo-Look option (option code M491)
- 911 Turbo 3.3 from 1984 to 1989

Sheet metal is sold individually, and two quantities are required per vehicle.

FEBI brandnew right rear caliper without exchange for Mazda Mx5 NA :
- NA phase 1 1.6 115hp from 1989 to 1994
- NA 1.6L 90hp with ABS- NA 1.8 130hp all models
Fits all MX5 models from 1989 to 2005 with ABS and 251 mm rear discs.

Right or left front brakecaliper slide, bush and bellows kit for Volkswagen Golf 1, 2, 3, Corrado and Polo 4 with original VW II (VW 2) mounting only:

Complete kit for 1 caliper comprising :
- 1 screw diameter 8mm length 45mm
- 1 screw diameter 8mm length 55mm
- 2 metal guide rings (sliders)
- 2 rubber slider bellows

During assembly, we recommend using ATE brake-specific grease (Order No. UD10275, to be ordered separately).