Wheel cylinder

ATE brake cylinder for rear wheel
Piston diameter ( inside the cylinder ! ) : 19,05 mm

- For VW Beetle

Brake cylinder for rear wheel
Piston diameter ( inside the cylinder ! ) : 19,05 mm
Standard quality.

For Beetle :
- 1200, 08/1964 ->11/1967
Chassis N° 115 000 001 ->118 328 505.
- 1300, 1500, 08/1964 ->07/1967
Chassis N° 115 000 001 ->117 999 000.

ATE brake cylinder for rear wheel
Piston diameter ( inside the cylinder ! ) : 19,05 mm

- For VW Beetle 1200 :
Years :08/1964 ->11/1967
Chassis N° 115 000 001 ->118 328 505.
- For VW Beetle 1300, 1500 :
Years :08/1964 ->07/1967
Chassis : N° 115 000 001 ->117 999 000.
- For VW Karmann type 14,
years : 08/1964->07/1967
Chassis : N° 145 000 001 ->147 999 000.

This front wheel cylinder with 8mm spanner fitting - STIB - for 2cv vans after 1970 - 28.6mm - M8x1.25mm is high quality.

This front wheel cylinder for 2cv cars and derivatives is faithful to the original.
From the STIB brand and is compatible with all models with 200mm front drum brakes.
Use an 8 mm spanner to connect it to the brake pipe.

Watch out!!! Your vehicle may have been modified, so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only DOT4 or DOT5 brake fluid.
LHM fluid is very corrosive to parts not designed for its use, and the wrong brake fluid could seriously damage your braking system.

This LHM - 16 mm - M8x1.25mm - rear wheel cylinder with 8mm spanner fitting for DYANEs and Acadianes is a quality remanufacture.

This LHM rear wheel cylinder for 2cv saloons is faithful to the original.
It is compatible with the 2cv saloons and derivatives from July 1981 onwards with front disc brakes.

Use an 8 mm spanner to connect it to the brake pipe.

Compatible models:
- 2cv6 AZL6 after 07/1981
- AMI 8 saloon AM3 after 07/1969
- Dyane 6 AYB after 06/1970
- Mehari after 07/1978

Watch out!!! Your vehicle may have been modified, (green for LHM, red for DOT) so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only LHM brake fluid.
LHM fluid is very corrosive to parts not designed for its use, and the wrong brake fluid could seriously damage your braking system.

This repair kit for rear wheel cylinders on DYANEs and Acadianes -LHM- 16mm is for restoring a wheel cylinder.

This LHM rear wheel cylinder repair kit contains the new rubber components to restore a 16mm diameter LHM rear wheel cylinder.

This repair kit for rear wheel cylinders on DYANEs up to 1978 -DOT4- 17.5mm is for restoring a wheel cylinder.

This DOT 4 rear wheel cylinder repair kit contains the new rubber components to restore a 17.5mm diameter DOT 4 rear wheel cylinder.

This repair kit for rear wheel cylinders on DYANEs and Acadianes -LHM- 17.5mm is for restoring a wheel cylinder.

This LHM rear wheel cylinder repair kit contains the new rubber components to restore a 17.5mm diameter LHM rear wheel cylinder.

This repair kit - STIB - for rear wheel cylinders on DYANEs -DOT4- 19mm is for restoring a wheel cylinder.

This DOT 4 rear wheel cylinder repair kit contains the new rubber components to restore a 19mm diameter DOT 4 rear wheel cylinder.

This front wheel cylinder for Dyane with 9 key (09/1967-07/1970)- 28.6mm is a quality reproduction.

This front wheel cylinder for Dyane is true to the original.
It is compatible with models with 200mm drum front brakes and 4.5mm hose and 9 key.

- Dyane 4 AYA/AYA2 : 09/1967-07/1970
- Dyane 6 AYA3/AYB : 01/1968-07/1970

Attention!! your vehicle may have been modified, check the diameter of the wheel cylinder and the wrench needed to tighten the brake hose ends.
Only use DOT4 or DOT5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, the wrong brake fluid could severely damage your brake system.

This Front Wheel Cylinder STOP for Dyane with key of 9 (09/1967-07/1970)- 28.6mm is original quality.

This Front Wheel Cylinder for Dyane is an original fitment.
It is compatible with models with 200mm drum front brakes and 4.5mm hose and 9 key.

- Dyane 4 AYA/AYA2 : 09/1967-07/1970
- Dyane 6 AYA3/AYB : 01/1968-07/1970

Warning!! your vehicle may have been modified, check the diameter of the wheel cylinder and the wrench needed to tighten the brake hose ends.
Only use DOT4 or DOT5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, the wrong brake fluid could severely damage your brake system.

This front wheel cylinder with 8mm spanner fitting - STIB - for DYANE after 1970 - 28.6mm - M8x1.25mm is superior quality.

This front wheel cylinder for DYANE is faithful to the original.
From the STIB brand and is compatible with all models with 200mm front drum brakes.
Use an 8 mm spanner to connect it to the brake pipe.

Watch out!!! Your vehicle may have been modified, so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only DOT4 or DOT5 brake fluid.
LHM fluid is very corrosive to parts not designed for its use, and the wrong brake fluid could seriously damage your braking system.

This LHM - 16 mm - M8x1.25mm - rear wheel cylinder with 8mm spanner fitting for Meharis is a quality remanufacture.

This LHM rear wheel cylinder for Meharis is faithful to the original.
It is compatible with Meharis from July 1977 onwards with front disc brakes.

Use an 8 mm spanner to connect it to the brake pipe.

Compatible models:
- 2cv6 AZL6 after 07/1981
- AMI 8 saloon AM3 after 07/1969
- Dyane 6 AYB after 06/1970
- Mehari after 07/1978

Watch out!!! Your vehicle may have been modified, (green for LHM, red for DOT) so check the diameter of the wheel cylinder and the spanner you need to tighten the brake hose ends.
Use only LHM brake fluid.
LHM fluid is very corrosive to parts not designed for its use, and the wrong brake fluid could seriously damage your braking system.

This repair kit for rear wheel cylinders on Meharis -LHM- 16mm is for restoring a wheel cylinder.

This LHM rear wheel cylinder repair kit contains the new rubber components to restore a 16mm diameter LHM rear wheel cylinder.

This repair kit for rear wheel cylinders on Meharis up to July 1977 -DOT4- 17.5mm is for restoring a wheel cylinder.

This DOT 4 rear wheel cylinder repair kit contains the new rubber components to restore a 17.5mm diameter DOT 4 rear wheel cylinder.

This repair kit - STIB - for rear wheel cylinders on Meharis -DOT4- 19mm is for restoring a wheel cylinder.

This DOT 4 rear wheel cylinder repair kit contains the new rubber components to restore a 19mm diameter DOT 4 rear wheel cylinder.

This front wheel cylinder for Mehari with 9 key (06/1968-01/1972)- 28.6mm is a quality reproduction.

This front wheel cylinder for Mehari is true to the original.
It is compatible with models with 200mm drum front brakes and 4.5mm hose and 9 key.

- Mehari: 06/1968-01/1972

Attention! your vehicle may have been modified, check the diameter of the wheel cylinder and the wrench needed to tighten the brake hose ends.
Only use DOT4 or DOT5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, the wrong brake fluid could severely damage your brake system.

This Front Wheel Cylinder STOP for Mehari with key of 9 (06/1968-01/1972)- 28.6mm is original quality.

This Front Wheel Cylinder for Mehari is an original fitment.
It is compatible with models with 200mm drum front brakes and 4.5mm hose and 9 key.

- Mehari: 06/1968-01/1972

Attention! your vehicle may have been modified, check the diameter of the wheel cylinder and the wrench needed to tighten the brake hose ends.
Only use DOT4 or DOT5 brake fluid.
LHM fluid is very corrosive to parts not intended for its use, the wrong brake fluid could severely damage your brake system.

This rear wheel cylinder for 2cv AZA-AZAM (07/1964-02/1970) - 17,5mm - 9.125mm is a quality remanufacture.

This rear wheel cylinder for 2CV sedans is faithful to the original.
This rear wheel cylinder is compatible with 2CV sedans and derivatives from July 1964.

It is connected to the brake pipes using a 9 mm key.

Compatible models :
- 2CV AZA type AZ-A: 07/1964 to 02/1970
- 2CV AZAM type AZ-AM: 07/1964 to 09/1967

Please note that your vehicle may have been modified, so check the diameter of the wheel cylinder and the wrench required to tighten the brake hose ends.
Use only DOT4 or DOT5 brake fluid.
LHM fluid is highly corrosive to parts not intended for its use, and the wrong brake fluid can seriously damage your braking system.

This rear wheel cylinder for Dyane (08/1967-02/1970) - 17,5mm - 9.125mm is a quality remanufacture.

This rear wheel cylinder for Dyane is faithful to the original.
This rear wheel cylinder is compatible with early Dyane models.

Its connection to the brake hoses is made by a 9 key.

Compatible models :
- DYANE (425) type AYA: 08/1967 to 01/1969
- DYANE 4 type AYA2: 03/1968 to 02/1970
- DYANE D6 type AYA3: 01/1968 to 04/1968
- DYANE 6 type AYA3/AYB/AY-CB: 05/1968 to 02/1970

Caution: if your vehicle has been modified, check the diameter of the wheel cylinder and the wrench required to tighten the brake hose ends.
Use only DOT4 or DOT5 brake fluid.
LHM fluid is highly corrosive to parts not intended for its use, and the wrong brake fluid can seriously damage your braking system.