Wings

Repair panel including the left rear wing.
Outer side panel of the wheel arch, including the ventilation grille.

For VW Combi Split Brazil (1957-1975)

This left front wing mounting panel for Renault 4L (10/1961-01/1994) is actually higher quality than the original.

This left front wing mount for Renault 4L is located above the wing. It connects the wing cheek to the front left wing.
Made in Europe from electro-galvanised steel sheet, this upper front wing mount has higher corrosion resistance compared to the original metal panelling.

Lower left corner repair plate in front of rear wheel for VW Transporter T25 from 05/1979 to 07/1992.

Complete right rear corner panel for VW Transporter T25 syncro only from 05/1979 to 07/1992.

Classic Lineright front fender for Mercedes SL W113 Pagoda all European models.
Quality remanufactured, intended for European models without additional pilot light on the side of the fender.
A black storage and protection primer is applied to the fender, and may contain scratches. It must be removed before painting.
Assignments :- Mercedes 230 SL 113.042 07/1963 to 01/1967 6 cylinders 2.3L 150hp (M 127.981)- Mercedes 250 SL 113.043 12/1966 to 01/1968 6 cylinders 2.5L 150hp (M 129.982)- Mercedes 280 SL 113.044 01/1968 to 03/1971 6 cylinders 2.8L 170hp (M 130.983)

Repair sheet metal including right rear fender.This outer wheel arch side panel also includes the ventilation grille and fuel filler flap opening.
For VW Combi Split from 03/1955 to 07/1962

Arc d'aile arrière gauche côté conducteur pour BMW série 5 E28 Berline 4 portes :

- Tous modèles du 06/1980 au 12/1987 (y compris M5 et M535i)

Cette tôle de réparation fait partie des pièces dont la corrosion est très souvent présente sur la E28. Avant la mise en peinture définitive, il est essentiel de la traiter et de la préparer dans le but d'éviter que de la corrosion ne réapparaisse.

Cette pièce de carrosserie est dite "adaptable" car elle ne provient pas du constructeur.

Rear right wing arch on passenger side for BMW series 3 E30 4 doors until 08/1987:

- Sedan
(including 4 wheel drive)

WARNING: Not suitable for Touring, 2-door Coupé, Cabriolet and M3 version!

This wheel arch edge (outer part) comes in black storage paint. It will be necessary to treat and prepare it in order to prevent corrosion from reappearing. Before final painting, it is essential to carry out a blank assembly in order to check the alignment with the bumper and the setting on the body.

Quality part, called "adaptable" not coming from the original manufacturer.

Quality part, called "adaptable" not coming from the original manufacturer.

Front left fender on driver's side for BMW series 3 E36 Coupé and Cabriolet until 09/1996:

- All models (including M3)

With hole for indicator repeater.

This body panel comes in black storage paint. It will be necessary to treat and prepare it in order to prevent corrosion from reappearing. Before final painting, it is essential to carry out a blank assembly in order to check the alignments and the adjustment on the body.

Quality part, called "adaptable" not coming from the original manufacturer.

Quality part, referred to as adaptable as it is not provided by the vehicle manufacturer.

Quality part, referred to as adaptable as it is not provided by the vehicle manufacturer.

Suitable for Saloon, Touring and Compact
Without indicator hole

Give your 911 Type G the legendary look of the 3.0 RSR
Faithfully reproducing the left front fender of the legendary Porsche 911 3.0 RSR, this reinforced polyester part gives your 911 Type G the iconic look of the racing models of the 70s.
Designed with a precise fit and high-end manufacturing quality, it mounts in place of the original fender for an authentic look and perfect integration.
Features:Faithful design: reproduction of the Porsche 911 3.0 RSR styleReinforced polyester construction (GFK): strong and durableMeticulous fitReady-to-paint finishCompatibility: Porsche 911 Type G (1974-1989)
An ideal choice for Porsche enthusiasts looking for :
RSR-style restoration Top-of-the-range, race-inspired restomod customization Track preparation in the spirit of the legendary 911 racing cars

Right front fender type 2.8 RSR in fiberglass-reinforced polyester for Porsche 911 type F from 1965 to 1973 :
- 911 2.0 from 1965 to 1967- 911 2.0 S from 1967- 911 2.0 T / L / S from 1968- 911 2.0 T / E / S from 1969- 911 2.2 T / E / S from 1970 to 1971- 911 2.4 T / E / S from 1972 to 1973- 911 2.7 Carrera RS from 1973
This wing is a faithful reproduction of the wings on the famous 911 RSRs that won numerous prestigious competitions around the world.
Made in France, it's ideal for eliminating corrosion while saving over 3kg per wing!

Side air damper grilles typical of these years for VW Beetle Split from 04/1951 to 09/1952.

Side air valve gaskets typical of these years for VW Beetle Split from 04/1951 to 09/1952.

Kevlar carbon front left fender without fuel filler flap for Porsche 911 from 1969 to 1973:
This body part is a faithful, high-quality reproduction, made in France by a recognized specialist who has worked for Porsche for decades. Designed in composite, it eliminates any risk of corrosion, offers increased rigidity and a significant weight saving over the original component.
Ideal for restomods, track preparation or restorations, this part benefits from a precise fit thanks to carefully crafted molds. Unlike some sheet-metal reproductions, it won't require long hours of adaptation before painting and assembly.
Porsche 911:
- 911 2.0 T / E / S from 1969- 911 2.2 T / E / S from 1970 to 1971- 911 2.4 T / E / S from 1972 to 1973- 911 2.7 Carrera RS from 1973

Give your 911 Type G the legendary look of the 3.0 RSR
Faithfully reproducing the left rear wing of the legendary Porsche 911 3.0 RSR, this reinforced polyester part gives your 911 Type G the iconic look of the racing models of the 70s.
Designed with a precise fit and high-end manufacturing quality, it mounts in place of the original fender for an authentic look and perfect integration.
Features:Faithful design: reproduction of the Porsche 911 3.0 RSR styleReinforced polyester construction (GFK): strong and durableMeticulous fitReady-to-paint finishCompatibility: Porsche 911 Type G (1974-1989)
An ideal choice for Porsche enthusiasts looking for :
RSR-style restoration Top-of-the-range, race-inspired restomod customization Track preparation in the spirit of the legendary 911 racing cars

Give your 911 Type G the legendary look of the 3.0 RSR
Faithfully reproducing the right rear wing of the legendary Porsche 911 3.0 RSR, this reinforced polyester part gives your 911 Type G the iconic look of the racing models of the 70s.
Designed with a precise fit and high-end manufacturing quality, it mounts in place of the original fender for an authentic look and perfect integration.
Features:Faithful design: reproduction of the Porsche 911 3.0 RSR styleReinforced polyester construction (GFK): strong and durableMeticulous fit Ready-to-paint finishCompatibility: Porsche 911 Type G (1974-1989)
An ideal choice for Porsche enthusiasts looking for :
RSR-style restoration Top-of-the-range, race-inspired restomod customization Track preparation in the spirit of the legendary 911 racing cars

Left rear wing repair panel.
Short model
Exterior side panel of the wheel arch.

For Camper/VW Split Window Camper Brazil Sinka pick-up (1957-1975)