Wings

WARNING: not suitable for Audi A4 Quattro versions

Complete front left-hand wheelhouse to weld
with bumper support.
without joint profile section (part reference VA11804).

For Beetle:
- 1200 from 08/1973-> chassis no.114 2000 001->
- 1300, 1500 from 08/1967-> chassis no.118 000 001->
(Can be fitted on versions 08/60 ->07/67 by modifying the bumper support).

DANSK front right fender for Porsche 911 type 964 Carrera 2 and 4 from 1989 to 1994:

- 964 3.6 - 250hp (M64.01/02) Carrera 2 from 1990 to 1994
- 964 3.6 - 250hp (M64.01) Carrera 4 from 1989 to 1994

The fender is already perforated to accommodate the turn signal repeater.

Left front wing for Bmw Z3 Series: -  Compatible with all versions < strong>Bmw Series Z3 E36  Coupé and Roadster from 12/1994 until 06/2002 including model M  Technic engine code s54. This body panel is delivered in storage paint. It will be necessary to treat and prepare it in order to prevent corrosion from reappearing. Before final painting, it is essential to carry out a blank assembly in order to check the alignments and the adjustment on the body.

This right rear wing for 2cvs before 1970 is high quality.

Compatible with all 2cv saloon models and identical to the original model, this rear wing has a hole for the fuel filler chute to go through.
It will be delivered to you in black storage paint.

This front right wing panel for 2cv vans from 1961 onwards is compatible with 2cv saloons or vans with 5-ribbed front bonnets.

In December 1960 the 2cv changed to a new bonnet with 5 ribs to replace the famous corrugated bonnet. The wing panels were also modified and lost their louvers for a more modern concave boss.

This front right wing panel in electro-galvanised steel is superior quality compared to the original one.
Mounting it requires specific fittings, a clamp on the frame, a securing bracket, seals and protection.

This front right wing panel for 2cvs from 1961 onwards is compatible with 2cv saloons or vans with 5-ribbed front bonnets.

In December 1960 the 2cv changed to a new bonnet with 5 ribs to replace the famous corrugated bonnet. The wing panels were also modified and lost their louvers for a more modern concave boss.

This front right wing panel in electro-galvanised steel is superior quality compared to the original one.
Mounting it requires specific fittings, a clamp on the frame, a securing bracket, seals and protection.

Front right wing for:
- Mercedes S W116 from 1972 to 1980

This front right wing panel for 2cvs is compatible with 2cv saloons or vans with 5-ribbed front bonnets.

In December 1960 the 2cv changed to a new bonnet with 5 ribs to replace the famous corrugated bonnet. The wing panels were also modified and lost their louvers for a more modern concave boss.

This front right wing panel in electro-galvanised steel is superior quality compared to the original one.
Mounting it requires specific fittings, a clamp on the frame, a securing bracket, seals and protection.

This reinforcement panel for the right rear wing for 2cv saloons is for welding on the wing panel.

It accommodates the welded nut for attaching the right rear belt.

Complete right front step to be welded for VW Combi T2 Bay Window from 08/1972 to 07/1979 from chassis n°2132000001.Often attacked by rust over time, the fenders are very quickly in poor condition, corrosion often starts with this part, change it before it's too late ...

Complete right rear corner panel for VW Transporter T25 all models except syncro.

Repair plate for lower right corner in front of rear wheel for VW Transporter T25 from 05/1979 to 07/1992.

DANSK front left fender for Porsche 911 type 964 Carrera 2, 4 and RS from 1989 to 1994:

- 964 3.6 - 250hp (M64.01/02) Carrera 2 from 1990 to 1994
- 964 3.6 - 250hp (M64.01) Carrera 4 from 1989 to 1994
- 964 3.6 - 260hp (M64.03) Carrera RS from 1992
- 964 3.6 - 250hp (M64.03) Carrera RS America from 1992

The fender is already perforated to accommodate the turn signal repeater.

Left rear side panel for Volkswagen Polo 3
For VW Polo 6N2 GTI 3-door only
Genuine Volkswagen part

DANSK left front fender liner repair sheet for Porsche 911 type F and 912 from 1969 to 1973 :

- Porsche 911 type F :

- 911 2.0 T / E / S from 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS from 1973

- Porsche 912 :

- 912 1.6 - 90 hp (616.36) from 1969

Left front fender arch sheet metal for VW Combi Split up to 10/1962.
High-quality Silver Weld Through

Front right fender arch plate for VW Combi Split up to 10/1962
High-quality Silver Weld Through

Complete left rear fender for Mercedes Pagode

For Mercedes SL Pagode W113 all models :
- 230 SL (113.042) from 07/1963 to 01/1967
- 250 SL (113 043) from 12/1966 to 01/1968
- 280 SL (113.044) from 01/1968 to 03/1971

Left side (driver)
Quality remanufacturing

Front left fender for Porsche 911 type 997 from 2005 to 2013 :

- 997 phase 1 3.6 Carrera 2 and 4 from 2005 to 2008
- 997 phase 1 3.8 Carrera S and 4S from 2005 to 2008
- 997 phase 2 3.6 Carrera 2 and 4 from 2009 to 2012
- 997 phase 2 3.8 Carrera S and 4S from 2009 to 2012
- 997 3.8 Carrera GTS from 2011 to 2012
- 997 3.8 Carrera 4 GTS from 2012

- 997 3.6 Turbo from 2007 to 2009
- 997 3.8 Turbo from 2010 to 2013
- 997 3.8 Turbo S from 2010 to 2013

- 997 3.6 GT2 from 2008 to 2009
- 997 3.6 GT3 from 2007 to 2009
- 997 3.8 GT3 from 2010 to 2011
- 997 3.6 GT3 RS from 2007 to 2009