Wings

Quality part, called 'adaptable' because it is not supplied by the vehicle manufacturer

For E90 & E91:
- All models except M3

For E90 LCI & E91 LCI:
- All models except M3

Front right fender, passenger side, ABS plastic with hole for turn signal repeater for BMW 3 Series E92 E92LCI Coupé and E93 E93LCI Cabriolet:

- All phase 1 and phase 2 models from 05/2005 to 10/2013 (except M3)

This body panel is supplied primed. Before final painting, it is essential to carry out a blank assembly to check alignment and adjustment on the body.

This is an "adaptable" quality part, as it does not come from the manufacturer.

Quality part, called "adaptable" because it does not come from the manufacturer, passenger side,

For E81, E82, E87, E87 LCI & E88:
- All models
(except E82 M)

Right wing for Volkswagen Golf Mk3 Convertible.

Chassis number: starting from 1E-T-000 001

Front right fender for Volkswagen Golf 4 Cabriolet
For VW Golf 4 Cabriolet all models.Not suitable for saloon models
Right side (passenger)
Genuine Volkswagen part

Front left fender bracket for Volkswagen Polo 5
For VW Polo V (6R) all models from 2009 to 2017
This front fender mounting plate secures the front part of the fender to the chassis.Left side (driver)

Repair plate for rear corner of right front wheel arch for VW Transporter T25 / T3, Bus, Van, Caravelle, Joker, Westfalia version Syncro (4 x 4) from 10/1984 to 07/1992.
Original Volkswagen Classic Parts.

Front right fender for Mercedes E-Class W210 since 10/1999
Phase 2 fender without turn signal repeater

Left front fender to be painted, original VW Mexico quality. Model without turn signal hole (original in the bumper) with 25 mm mounting slot.
For VW Cox 1200 since 08/1974 and since chassis no. 115 2000 001 + Mexicaine
Can be mounted in "Cal Look" style or by re-drilling the turn signal hole to obtain VW quality on 1200 since 08/1973.Adaptable to 1300, 1500 sedan and cabriolet versions since 08/1967 by changing the hardware joints.
Whatever the body components, origin or quality, a "blank assembly" is essential to check and correct any adjustments before painting.

Repair sheet metal for the inside right-hand part of the step at the bottom of the front fender flange for Bay Window Combi from 08/1967 to 07/1972 up to chassis no. 212 2300 000.

Repair sheet metal for the left inner part of the footboard at the bottom of the front fender flange for Combi Bay Window from 08/1967 to 07/1972 up to chassis no. 212 2300 000.

Aile sans trou d'antenne, prévue pour répétiteur de clignotant de forme ovale (non fourni), pour Golf 3 et Vento à partir de 08/95->

Repair plate for the outer part of the step at the bottom of the right front fender flange for Bay Window Combi from 08/1972 to 07/1979 from chassis no. 213 2000 001->

Left rear wing to be paintedmodel with 20 mm mounting slot
For VW Cox :- 1200 from 08/1973 to 07/1974 from chassis no. 114 2000 001 to no. 114 2999 999.- 1303 from 08/1972 to 07/1974 from chassis no. 133 2000 001 to no. 134 2999 999.

Left rear wing for VW Beetle Oval and after
Perfect workmanship, as original
Made in Germany


For VW Beetle Oval and after (1956-1959)

Whatever the body components, origin or quality, a "blank assembly" is essential to check and correct any adjustments before painting.

Classic Lineleft front fender for Mercedes SL W113 Pagoda all European models.
Quality remanufactured, intended for European models without additional pilot light on the side of the fender.
A black storage and protection primer is applied to the fender, and may contain scratches. It must be removed before painting.
Assignments :- Mercedes 230 SL 113.042 07/1963 to 01/1967 6 cylinders 2.3L 150hp (M 127.981) - Mercedes 250 SL 113.043 12/1966 to 01/1968 6 cylinders 2.5L 150hp (M 129.982) - Mercedes 280 SL 113.044 01/1968 to 03/1971 6 cylinders 2.8L 170hp (M 130.983)

DANSK left rear fender for Porsche 911 and 912 from 1969 to 1973:
-> Porsche 912 Targa : - 912 1.6 from 1969
-> Porsche 911 Targa : - 911 2.0 T / E / S from 1969- 911 2.2 T / E / S from 1970 to 1971- 911 2.4 T / E / S from 1972 to 1973
The wing is supplied with the rear door pillar.
DANSK body parts are certified by Porsche for their Porsche Classic department.

Right front fender for Peugeot 206 XS, 206 S16 and 206 RC
Assignments :- 206 S16 - 2.0 16V 1997cm3 137hp (EW10J4) RFR phase 1 from 08/1999 to 07/2000- 206 S16 - 2.0 16V 1997cm3 138hp (EW10J4) RFN phase 1 from 08/2000 to 07/2002- 206 S16 - 2.0 16V 1997cm3 138hp (EW10J4) RFN phase 2 from 08/2002 to 07/2004- 206 XS - 1.6 1587cm3 90hp (TU5JP) RFR phase 1 from 1999 to 2000- 206 XS - 1.6 16V 1587cm3 110hp (TU5JP4) RFN phase 1 from 2000 to 2003- 206 XS - 1.6 16V 1587cm3 110hp (TU5JP4) RFN phase 2 from 2003 to 2007- 206 S16 - 1.6 16V 1587cm3 110hp (TU5JP4) RFN phase 2 from 08/2004 to 07/2007- 206 RC - 2.0 16V 1997cm3 177hp (EW10J4S) phase 2 from 01/2003 to 07/2007
Also suitable for 206 CC
Whatever the body components, origin and quality, a "blank assembly" is essential to check and correct any adjustments before painting.

Left front fender for Peugeot 206 XS, 206 S16 and 206 RC
Assignments :- 206 S16 - 2.0 16V 1997cm3 137hp (EW10J4) RFR phase 1 from 08/1999 to 07/2000- 206 S16 - 2.0 16V 1997cm3 138hp (EW10J4) RFN phase 1 from 08/2000 to 07/2002- 206 S16 - 2.0 16V 1997cm3 138hp (EW10J4) RFN phase 2 from 08/2002 to 07/2004- 206 XS - 1.6 1587cm3 90hp (TU5JP) RFR phase 1 from 1999 to 2000- 206 XS - 1.6 16V 1587cm3 110hp (TU5JP4) RFN phase 1 from 2000 to 2003- 206 XS - 1.6 16V 1587cm3 110hp (TU5JP4) RFN phase 2 from 2003 to 2007- 206 S16 - 1.6 16V 1587cm3 110hp (TU5JP4) RFN phase 2 from 08/2004 to 07/2007- 206 RC - 2.0 16V 1997cm3 177hp (EW10J4S) phase 2 from 01/2003 to 07/2007
Also suitable for 206 CC
Whatever the body components, origin and quality, a "blank assembly" is essential to check and correct any adjustments before painting.