Wings

Weldedfront left corner for VW Combi Bay Window from 08/1972 to 07/1973

Repair sheet metal including right rear fender.This outer wheel arch side panel includes the opening for the fuel filler flap.
For VW Combi Split pick-up single cab from 08/1962 to 07/1966.

Front leftfender for Bmw Z4 Series:
- Compatible with all Bmw Z4 Series E85 Roadster and E86 Coupé versions from 01/2002 to 08/2008 including M Technic engine code s54.
This body panel is delivered in storage paint. It will need to be treated and prepared to prevent corrosion from reappearing. Before final painting, it is essential to carry out a blank assembly to check alignment and adjustment on the body.

Fender mounting kit for Peugeot 106 phase 2 without widener (1996-2003)
this kit contains the plastic clips for fixing the fender.
Not suitable for 106 S16, GTI or Rallye.

Wheel arch gasket for Citroën ID left rear fendershell .
This gasket ensures a perfect seal between the fender shell and the bodywork.
compatible models:ID 19 Sedans and Cabriolets (1911cc) - (1958-1966)=ID 19/20 Sedans (1985cc) - (1967-1971)

This right rear fender for DYANE (08/1967-08/1983) is a high quality remanufacture.

This rear fender for DYANE is stamped from 0.8mm thick electro zinc plated sheet metal is of a higher quality than the original fenders. It is compatible with all DYANES
Type mines:
- AYA
- AYA2
- AYA3
- AYB
- AY-CB

This left rear fender for DYANE (08/1967-08/1983) is a high quality remanufacture.

This rear fender for DYANE is stamped from 0.8mm thick electro zinc plated sheet metal is of a higher quality than the original fenders. It is compatible with all DYANES
Type mines:
- AYA
- AYA2
- AYA3
- AYB
- AY-CB

This front wing attachment nut for 2cvs (1963-1970) secures the front wings.

Made of bi-chromated steel, this front wing nut is compatible with the 2cv vans with the 5-ribbed bonnet from 1963.

Its free base remains stationary and protects the paint when clamped.

This front wing panel bracket for 2cvs from 1961 onwards holds the wing panel on the body.

For 2cv saloons and vans after 1961, this bracket enables you to attach the upper part of the right and left wing panels on the body.
A rubber lining acts as a silent block and prevents unwanted noise and vibrations.

This rubber protector for the wing panel on 2cvs from 1961 onwards also acts as a silentblock.

It insulates the body from the extraneous noise and vibration of the wing panels.

This front wing attachment nut for 2cv vans (1963-1978) secures the front wings.

Made of bi-chromated steel, this front wing nut is compatible with the 2cv vans with the 5-ribbed bonnet from 1963.

Its free base remains stationary and protects the paint when clamped.

This front wing panel bracket for 2cv vans (1961-1978) holds the wing panel on the body.

For 2cv saloons and vans after 1961, this bracket enables you to attach the upper part of the right and left wing panels on the body.
A rubber lining acts as a silent block and prevents unwanted noise and vibrations.

This rubber protector for the wing panel on 2cv vans also acts as a silentblock.

It isolates the body from extraneous noise and vibration of the wing panels.

This Front fender bracket on chassis for 2cv Fourgonnette AU-AZU (03/1951-09/1967) is faithful to the original.

This fender stop bracket for 2CV is compatible with early generation 2CV. It requires two hood stops to maintain the wing on the chassis.

Compatible models:

- 2CV AU type AU: 03/1951 to 07/1956
- 2CV AZU type AZU: 10/1954 to 03/1963
- 2CV AK 350 type AK: 04/1963 to 09/1967
- 2CV AZU type AZU-A: 03/1963 to 09/1967

This Front Fender Stop Bracket on Chassis for 2CV Van (03/1951-02/1970) is a quality reproduction.

This Front Fender Bracket for 2CV attaches between the chassis and front fenders of all models of2CV sedans or Vans through February 1970.Compatible models:
- 2CV A type A: 07/1949 to 03/1961
- 2CV AZ type AZ: 10/1954 to 03/1963
- 2CV AZL type AZ: 12/1956 to 03/1963
- 2CV AZLP type AZ: 09/1957 to 03/1963
- 2CV 4x4 "SAHARA" type AZ4/4: 09/1959 to 09/1966
- 2CV AZA type AZ-A: 03/1963 to 02/1970
- 2CV AZAM type AZ-AM: 03/1963 to 09/1967

- 2CV AU type AU: 03/1951 to 07/1956
- 2CV AZU type AZU: 10/1954 to 03/1963
- 2CV AK 350 type AK: 04/1963 to 07/1970
- 2CV AK 250 type AK
- 2CV AZU type AZU-A: 03/1963 to 09/1972

This right rear wing for 2cvs before 1970 is high quality.

Compatible with all 2cv saloon models and identical to the original model, this rear wing has a hole for the fuel filler chute to go through.
It will be delivered to you in black storage paint.

This left rear wing for 2cvs before 1970 is high quality.

Compatible with all models of 2cv saloon from 1961 onwards and is identical to the original model, comes in black storage paint.

This complete right rear wing panel for 2cvs before 1970 is high quality.

The wing panel on 2cv saloons is very exposed to corrosion, the electro-galvanised steel used for this part is higher quality with corrosion resistance superior to the original.
This rear wing panel with 2 grooves includes the reinforcement panel for securing the rear belts and the suspension stop bracket.
The stop bracket corresponds to the last nested stop model from 1973 onwards.
The front wing panels are not remanufactured, but you can adapt this part by re-welding the old model-s suspension stops.

Repair panel metal including the right rear wing.
Short model
Outer wheel arch side panel also includes fuel door opening.

For VW Combi Split Brazil (1957-1975)

DANSK right front fender upper corner structure for Porsche 911 type F, G and 912 from 1965 to 1989 :
- Porsche 911 type F :
- 911 2.0 from 1965 to 1967- 911 2.0 S from 1967- 911 2.0 T / L / S from 1968- 911 2.0 T / E / S from 1969- 911 2.2 T / E / S from 1970 to 1971- 911 2.4 T / E / S from 1972 to 1973- 911 2.7 Carrera RS from 1973
- Porsche 911 type G :
- 911 2.7 from 1974 to 1977- 911 S 2.7 from 1974 to 1977- 911 Carrera 2.7 from 1974 to 1976- 911 Carrera 3.0 from 1976 to 1977- 911 SC 3.0 from 1978 to 1983- 911 Carrera 3.2 from 1984 to 1989
- 911 Turbo 3.0 from 1975 to 1977- 911 Turbo 3.3 from 1978 to 1989
- Porsche 912 :
- 912 1.6 from 1966 to 1969- 912 2.0 from 1976