Wings

Repair plate for rear corner of right front wheel arch for VW Transporter T25 / T3, Bus, Van, Caravelle, Joker, Westfalia version Syncro (4 x 4) from 10/1984 to 07/1992.
Original Volkswagen Classic Parts.

Front right fender for Mercedes E-Class W210 since 10/1999
Phase 2 fender without turn signal repeater

Fender mounting kit for Peugeot 106 phase 2 without widener (1996-2003)
this kit contains the plastic clips for fixing the fender.
Not suitable for 106 S16, GTI or Rallye.

Wheel arch gasket for Citroën ID left rear fendershell .
This gasket ensures a perfect seal between the fender shell and the bodywork.
compatible models:ID 19 Sedans and Cabriolets (1911cc) - (1958-1966)=ID 19/20 Sedans (1985cc) - (1967-1971)

This right rear fender for DYANE (08/1967-08/1983) is a high quality remanufacture.

This rear fender for DYANE is stamped from 0.8mm thick electro zinc plated sheet metal is of a higher quality than the original fenders. It is compatible with all DYANES
Type mines:
- AYA
- AYA2
- AYA3
- AYB
- AY-CB

This left rear fender for DYANE (08/1967-08/1983) is a high quality remanufacture.

This rear fender for DYANE is stamped from 0.8mm thick electro zinc plated sheet metal is of a higher quality than the original fenders. It is compatible with all DYANES
Type mines:
- AYA
- AYA2
- AYA3
- AYB
- AY-CB

This straight rear wing for 2CV sedan is of superior quality.
Compatible with all 2CV sedan models, it is identical to the original model, and features a hole for the fuel filler neck.Delivered in unfinished steel.

This Front fender bracket on chassis for 2cv Fourgonnette AU-AZU (03/1951-09/1967) is faithful to the original.

This fender stop bracket for 2CV is compatible with early generation 2CV. It requires two hood stops to maintain the wing on the chassis.

Compatible models:

- 2CV AU type AU: 03/1951 to 07/1956
- 2CV AZU type AZU: 10/1954 to 03/1963
- 2CV AK 350 type AK: 04/1963 to 09/1967
- 2CV AZU type AZU-A: 03/1963 to 09/1967

This Front Fender Stop Bracket on Chassis for 2CV Van (03/1951-02/1970) is a quality reproduction.

This Front Fender Bracket for 2CV attaches between the chassis and front fenders of all models of2CV sedans or Vans through February 1970.Compatible models:
- 2CV A type A: 07/1949 to 03/1961
- 2CV AZ type AZ: 10/1954 to 03/1963
- 2CV AZL type AZ: 12/1956 to 03/1963
- 2CV AZLP type AZ: 09/1957 to 03/1963
- 2CV 4x4 "SAHARA" type AZ4/4: 09/1959 to 09/1966
- 2CV AZA type AZ-A: 03/1963 to 02/1970
- 2CV AZAM type AZ-AM: 03/1963 to 09/1967

- 2CV AU type AU: 03/1951 to 07/1956
- 2CV AZU type AZU: 10/1954 to 03/1963
- 2CV AK 350 type AK: 04/1963 to 07/1970
- 2CV AK 250 type AK
- 2CV AZU type AZU-A: 03/1963 to 09/1972

This front right wing panel for 2cv vans from 1961 onwards is compatible with 2cv saloons or vans with 5-ribbed front bonnets.

In December 1960 the 2cv changed to a new bonnet with 5 ribs to replace the famous corrugated bonnet. The wing panels were also modified and lost their louvers for a more modern concave boss.

This front right wing panel in electro-galvanised steel is superior quality compared to the original one.
Mounting it requires specific fittings, a clamp on the frame, a securing bracket, seals and protection.

This front left wing panel for 2cv vans from 1961 onwards is compatible with 2cv saloons or vans with 5-ribbed front bonnets.

In December 1960 the 2cv changed to a new bonnet with 5 ribs to replace the famous corrugated bonnet. The wing panels were also modified and lost their louvers for a more modern concave boss.

This front left wing panel in electro-galvanised steel is superior quality compared to the original one.
Mounting it requires specific fittings, a clamp on the frame, a securing bracket, seals and protection.

This front wing attachment nut for 2cv vans (1963-1978) secures the front wings.

Made of bi-chromated steel, this front wing nut is compatible with the 2cv vans with the 5-ribbed bonnet from 1963.

Its free base remains stationary and protects the paint when clamped.

This front wing panel bracket for 2cv vans (1961-1978) holds the wing panel on the body.

For 2cv saloons and vans after 1961, this bracket enables you to attach the upper part of the right and left wing panels on the body.
A rubber lining acts as a silent block and prevents unwanted noise and vibrations.

This rubber protector for the wing panel on 2cv vans also acts as a silentblock.

It isolates the body from extraneous noise and vibration of the wing panels.

This right rear wing for 2cvs before 1970 is high quality.

Compatible with all 2cv saloon models and identical to the original model, this rear wing has a hole for the fuel filler chute to go through.
It will be delivered to you in black storage paint.

Repair plate for right rear fender flange in front of wheel arch. Preformed sheet metal, to fit VW Combi Split all models up to 07/1967.

Complete left rear fender for VW Transporter T25 / T3 from 05/1979 to 07/1992.

This complete right rear wing panel for 2cvs before 1970 is high quality.

The wing panel on 2cv saloons is very exposed to corrosion, the electro-galvanised steel used for this part is higher quality with corrosion resistance superior to the original.
This rear wing panel with 2 grooves includes the reinforcement panel for securing the rear belts and the suspension stop bracket.
The stop bracket corresponds to the last nested stop model from 1973 onwards.
The front wing panels are not remanufactured, but you can adapt this part by re-welding the old model-s suspension stops.

This complete left rear wing panel for 2cvs before 1970 is high quality.

The wing panel on 2cv saloons is very exposed to corrosion, the electro-galvanised steel used for this part is higher quality with corrosion resistance superior to the original.
This rear wing panel with 2 grooves includes the reinforcement panel for securing the rear belts and the suspension stop bracket.
The stop bracket corresponds to the last stop models from 1973 onwards.
The front wing panels are not remanufactured, but you can adapt this part by re-welding the old model-s suspension stops.

This front right wing panel for 2cvs from 1961 onwards is compatible with 2cv saloons or vans with 5-ribbed front bonnets.

In December 1960 the 2cv changed to a new bonnet with 5 ribs to replace the famous corrugated bonnet. The wing panels were also modified and lost their louvers for a more modern concave boss.

This front right wing panel in electro-galvanised steel is superior quality compared to the original one.
Mounting it requires specific fittings, a clamp on the frame, a securing bracket, seals and protection.