Wings

Classic Lineright front fender for Mercedes SL W113 Pagoda all European models.
Quality remanufactured, intended for European models without additional pilot light on the side of the fender.
A black storage and protection primer is applied to the fender, and may contain scratches. It must be removed before painting.
Assignments :- Mercedes 230 SL 113.042 07/1963 to 01/1967 6 cylinders 2.3L 150hp (M 127.981)- Mercedes 250 SL 113.043 12/1966 to 01/1968 6 cylinders 2.5L 150hp (M 129.982)- Mercedes 280 SL 113.044 01/1968 to 03/1971 6 cylinders 2.8L 170hp (M 130.983)

This right rear fender for DYANE (08/1967-08/1983) is a high quality remanufacture.

This rear fender for DYANE is stamped from 0.8mm thick electro zinc plated sheet metal is of a higher quality than the original fenders. It is compatible with all DYANES
Type mines:
- AYA
- AYA2
- AYA3
- AYB
- AY-CB

DANSK front right mud guard for Porsche 356 A de febrero from 1957, B T5, B T6 y C :

-> Porsche 356 A :
- 356 A 1300 - 44 hp (506/1) from 02/1957
- 356 A 1300 S - 60 hp (589/2) from 02/1957
- 356 A 1600 - 60 hp (616/1) from 02/1957 to 1959
- 356 A 1600 S - 75 hp (616/2) from 02/1957 to 1959

-> Porsche 356 B T5 :
- 356 B 1600 - 60 hp (616/1) from 1960 to 1961
- 356 B 1600 S - 75 hp (616/2) from 1960 to 1961
- 356 B 1600 Super 90 - 90 hp (616/7) from 1960 to 1961

-> Porsche 356 B T6 :
- 356 B 1600 - 60 hp (616/1) from 1962 to 1963
- 356 B 1600 S - 75 hp (616/12) from 1962 to 1963
- 356 B 1600 Super 90 - 90 hp (616/7) from 1962 to 1963

-> Porsche 356 C :
- 356 C 1600 - 75 hp (616/15) from 1964 to 1965
- 356 SC 1600 - 95 hp (616/16) from 1964 to 1965

This version of the mudguard is recognizable by its 4 ribs formed in the sheet metal.

DANSK lower right front fender repair sheet for Porsche 911 F type from 1969 to 1973 :

- 911 2.0 T / E / S from 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS from 1973

Left rear wing to be paintedmodel with 20 mm mounting slot
For VW Cox :- 1200 from 08/1973 to 07/1974 from chassis no. 114 2000 001 to no. 114 2999 999.- 1303 from 08/1972 to 07/1974 from chassis no. 133 2000 001 to no. 134 2999 999.

Right rear wing for all BMW E10

- 1502
- 1602
- 1802
- 2002
- 2002 Ti
- 2002 Tii
- 2002 Turbo

Quality sheet metal wing.
Part said to be "adaptable" because it does not come from the manufacturer.

Thickness: 0.8 mm

Replacement plate for rear left-hand wing inner panel.
Wide section towards the front.

For VW Kombi T2 Bay Window
Years: 08/1967 -> 07/1970
Chassis: up to no. -> 210 2300 000.

Replacement plate for rear right-hand wing
outer wheel housing quarter panel.

For Bay Window models 08/1967 ->07/1970
up to chassis no. ->210 2300 000.

Driver's siderear left fender flange for BMW 02 series E10:

Sedan :
- 1600-2 85hp phase 1 from 03/1966 to 03/1971 (engine code M116)
- 1602 85hp phase 1 from 04/1971 to 08/1973 (engine code M116)
- 1602 85hp phase 2 from 09/1973 to 10/1975 (engine code M116)
- 1600ti 105hp phase 1 from 09/1967 to 12/1968 (engine code M116)
- 1802 90hp phase 1 from 04/1971 to 08/1973 (engine code M10B18)
- 1802 90hp phase 2 from 09/1973 to 05/1975 (engine code M10B18)
- 1802A auto phase 2 90hp from 07/1974 to 09/1974 (engine code M10B18)
- 1502 1.6l 75hp phase 2 from 11/1974 to 07/1977 (engine code M115)
- 2002 100hp phase 1 from 01/1968 to 08/1973 (engine code M05)
- 2002ti 120hp phase 1 from 09/1968 to 04/1972 (engine code M05)
- 2002A auto 100hp phase 1 from 01/1969 to 08/1973 (engine code M05)
- 2002tii 130hp phase 1 from 04/1971 to 08/1973 (engine code M15)
- 2002 100hp phase 2 from 09/1973 to 11/1975 (engine code M05)
- 2002A auto 100hp phase 2 from 09/1973 to 06/1975 (engine code M05)
- 2002tii 130hp phase 2 from 09/1973 to 11/1975 (engine code M15)
- 2002Turbo 170hp from 07/1973 to 07/1975 (engine code M31)

Cabriolet :
- 1600-2 85hp from 01/1968 to 06/1971 (engine code M116)
- 2002 100hp from 01/1971 to 06/1971 (engine code M05)

Cabriolet Baur Targa :
- 2002 100hp phase 1 from 06/1971 to 08/1973 (engine code M05)
- 2002 100hp phase 2 from 09/1973 to 12/1975 (engine code M05)

This repair plate is one of the most frequently corroded parts on the E10. Before final painting, it is essential to treat and prepare it to prevent corrosion from reappearing.

This bodywork part is called "adaptable" because it does not come from the manufacturer.

Quality part, called "adaptable" because it does not come from the manufacturer, passenger side,

For E81, E82, E87, E87 LCI & E88:
- All models
(except E82 M)

DANSK front left mud guard for Porsche 356 pre-A and A until January 1957 :

-> Porsche 356 pre-A :
- 356 1100 - 40 hp (369) from 1950 to 1954
- 356 1300 - 44 hp (506 and 506/2) from 1951 to 1955
- 356 1300 S - 60 hp (589 and 589/2) from 1954 to 1955
- 356 1500 Cabriolet - 60 hp (527) from 1952
- 356 1500 - 55 hp (546 and 546/2) from 1953 to 1955
- 356 1500 S - 70 hp (528 and 528/2) from 1953 to 1955

-> Porsche 356 A :
- 356 A 1300 - 44 hp (506/1) from 1956 to 01/1957
- 356 A 1300 S - 60 hp (589/2) from 1956 to 01/1957
- 356 A 1600 - 60 hp (616/1) from 1956 to 01/1957
- 356 A 1600 S - 75 cv (616/2) from 1956 to 01/1957

This version of the mudguard is recognizable by its 5 ribs formed in the sheet metal.

Right rear shell repair plate for Citroën ID.
This plate features a hole for the fuel filler neck. It is compatible with all Citroën ID Sedans.
Compatible models:ID 19 Sedans and Cabriolets (1911cc) - (1958-1966)ID 19/20 Sedans (1985cc) - (1967-1971)

Aile avant gauche de reproduction en polyester.
Dimensions d'origine. Qualité supérieure.

Pour VW Kübel 181, tous modèles
Années : 08/1969 ->12/1979

Left rear lower fender repair sheet for VW Combi Split from 1950 to 07/1967.

Front left wing arch repair panel for VOLKSWAGEN Transporter T5

This straight rear wing for 2CV sedan is of superior quality.
Compatible with all 2CV sedan models, it is identical to the original model, and features a hole for the fuel filler neck.Delivered in unfinished steel.

This left rear fender for DYANE (08/1967-08/1983) is a high quality remanufacture.

This rear fender for DYANE is stamped from 0.8mm thick electro zinc plated sheet metal is of a higher quality than the original fenders. It is compatible with all DYANES
Type mines:
- AYA
- AYA2
- AYA3
- AYB
- AY-CB

This front wing panel bracket for 2cv holds the wing panel on the body.

For 2cv saloons and vans after 1961, this bracket enables you to attach the upper part of the right and left wing panels on the body.
A rubber lining acts as a silent block and prevents unwanted noise and vibrations.

For Golf 3 :
- Berline & Break since 08/95->

With oval repeater + antenna hole

Weld-onright front corner for VW Combi Bay Window from 08/1972 to 07/1973