Wings

DANSK Front left fender mounting bracket for Porsche 911 and 912 until 1968 :

-> Porsche 912 :
- 912 1.6 from 1966 to 1968

-> Porsche 911 :
- 911 2.0 from 1965 to 1967
- 911 2.0 T of 1968
- 911 2.0 L of 1968
- 911 2.0 S from 1967 to 1968

Side repair plate behind right rear wheel arch for VW Transporter T25 / T3 all models from 05/1979 to 07/1992

Right front fender for Peugeot 206 XS, 206 S16 and 206 RC
Assignments :- 206 S16 - 2.0 16V 1997cm3 137hp (EW10J4) RFR phase 1 from 08/1999 to 07/2000- 206 S16 - 2.0 16V 1997cm3 138hp (EW10J4) RFN phase 1 from 08/2000 to 07/2002- 206 S16 - 2.0 16V 1997cm3 138hp (EW10J4) RFN phase 2 from 08/2002 to 07/2004- 206 XS - 1.6 1587cm3 90hp (TU5JP) RFR phase 1 from 1999 to 2000- 206 XS - 1.6 16V 1587cm3 110hp (TU5JP4) RFN phase 1 from 2000 to 2003- 206 XS - 1.6 16V 1587cm3 110hp (TU5JP4) RFN phase 2 from 2003 to 2007- 206 S16 - 1.6 16V 1587cm3 110hp (TU5JP4) RFN phase 2 from 08/2004 to 07/2007- 206 RC - 2.0 16V 1997cm3 177hp (EW10J4S) phase 2 from 01/2003 to 07/2007
Also suitable for 206 CC
Whatever the body components, origin and quality, a "blank assembly" is essential to check and correct any adjustments before painting.

Repair sheet metal for the outer part of the footboard at the bottom of the left front fender flange for VW Combi Bay Window from 08/1967 to 07/1972 up to chassis no. 212 2300 000.In top quality, the part is similar to the original in both sheet metal quality and finish.

Front left fender bracket for Volkswagen Polo 5
For VW Polo V (6R) all models from 2009 to 2017
This front fender mounting plate secures the front part of the fender to the chassis.Left side (driver)

Complete rear left-hand corner up to the gutter
for models with large lights and bumper. Original VW part.

For Combi Bay Window, 08/1971 ->07/1979
since chassis no. 212 2000 001->

For Bora Sedan and Break
Quality part, called "adaptable" because it does not come from the manufacturer.
Fender in stock paint (black or grey)

Mounting kit for Porsche 911 and 912 front fender :

-> Porsche 912 :
- 912 1.6 from 1965 to 1969
- 912 E 2.0 of 1976

-> Porsche 911 :
- 911 2.0 from 1965 to 1968
- 911 2.0 T / L / E / S from 1967 to 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS from 1973
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1977
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0 SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

-> Porsche 930 :
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1989

The mounting kit contains :
- 10 hexagonal screws
- 10 washers
- 10 speed nuts

It allows the mounting of 1 front fender.

DANSK rear right fender for Porsche 911 and 912 from 1969 to 1973 :
-Porsche 912 Targa :
- 912 1.6 from 1969
- Porsche 911 Targa :
- 911 2.0 T / E / S from 1969- 911 2.2 T / E / S from 1970 to 1971- 911 2.4 T / E / S from 1972 to 1973
The wing is supplied with the rear door pillar.
DANSK body parts are certified by Porsche for their Porsche Classic department.

Replacement plate for rear left-hand wing inner panel.
Small piece towards the rear.

For VW Kombi T2 Bay Window
Years: 08/1967 -> 07/1970
Chassis: up to no. -> 210 2300 000.

Leftfront fender for Mini Austin flasher:
- Compatible with all Mini Austin versions from 09/1958 to 05/2000.
Turn signal not included.
This body panel is delivered in storage paint. It will need to be treated and prepared to prevent corrosion from reappearing. Before final painting, it is essential to carry out a blank assembly to check alignment and adjustment on the body.

Left front fender on driver's side for BMW series 3 E36 Coupé and Cabriolet from 01/1992 to 12/1999 :

- All models (fenders with or without hole for side indicator repeater, including Coupe M3 S50)

This body panel comes in black storage paint. It will be necessary to treat and prepare it in order to prevent corrosion from reappearing. Before final painting, it is essential to carry out a blank assembly in order to check the alignments and the adjustment on the body.

Quality part, called "adaptable" not coming from the original manufacturer.

For Golf 3:
- Saloon & Estate up to ->07/95

Wing with rectangular repeater + aerial hole

Rear left-hand wheel housing in sheet metal ready for painting,
on standard chassis with short wheelbase: 2920 mm.

For VW Transporter T4, 09/1990 ->06/2003
All models with short bodywork.

Driver's side fender,

For VW Scirocco 1 :
- All models from 74 to 77

This grey nylon washer will be positioned between the rear wing plate and the fixing screw of your Citroën DS Sedan.
This washer is fitted on all DS models from 1967 onwards.It is advisable to fit the washer with the raised edge towards the screw head and not towards the bodywork, to avoid damaging the paintwork.
Dimension: 12.5X27X2.7mm
Compatible models:DS 19/20 Sedans (1985cc) - (1967-1975)DSuper/DSpécial (1985cc) - (1972-1975)DS 21 Sedans and Cabriolets (2175cc) - (1967-1969)DS 23 Sedans (2347cc) - (1973-1975)

DANSK rear right fender for Porsche 911 and 912 from 1969 to 1973:
-> Porsche 912Coupé : - 912 1.6 from 1969
-> Porsche 911Coupé : - 911 2.0 T / E / S from 1969- 911 2.2 T / E / S from 1970 to 1971- 911 2.4 T / E / S from 1972 to 1973
The wing is supplied with the rear door pillar.
DANSK body parts are certified by Porsche for their Porsche Classic department.

Replacement plate for inside right rear wing arch for Mercedes W123 Saloon and S123 Estate
(Adaptable for Coupé C123 version)

Aile sans trou d'antenne, prévue pour répétiteur de clignotant de forme ovale (non fourni), pour Golf 3 et Vento à partir de 08/95->

This front right wing panel for 2cvs is compatible with 2cv saloons or vans with 5-ribbed front bonnets.

In December 1960 the 2cv changed to a new bonnet with 5 ribs to replace the famous corrugated bonnet. The wing panels were also modified and lost their louvers for a more modern concave boss.

This front right wing panel in electro-galvanised steel is superior quality compared to the original one.
Mounting it requires specific fittings, a clamp on the frame, a securing bracket, seals and protection.