Coil over suspension kit

REDLINE threaded combination suspension kit for Audi A3 (8L)
For Audi A3 (8L) all models except Quattro
Height-adjustable :Front : -25 mm to -60 mm on shock absorbersRear: -25 mm to -40 mm on cupsSteel shock absorber cartridgesFixed factory setting (hardness not adjustable)
Excellent value for money for firm lowering or roadholding
TÜV-approved

REDLINE threaded combination suspension kit for SEAT Leon 1 (1M)
For SEAT Leon 1 (1M) all models except 4-wheel drive
Height-adjustable :Front : -25 mm to -60 mm on shock absorbersRear: -25 mm to -40 mm on cupsSteel shock absorber cartridgesFixed factory setting (hardness not adjustable)
Excellent value for money for firm lowering or roadholding
TÜV-approved

REDLINE threaded combination suspension kit for Volkswagen New Beetle
For VW New Beetle all sedan and convertible models
Height-adjustable :Front : -25 mm to -60 mm on shock absorbersRear: -25 mm to -40 mm on cupsSteel shock absorber cartridgesFixed factory setting (hardness not adjustable)
Excellent value for money for firm lowering or roadholding
TÜV-approved

REDLINE threaded combination suspension kit for Volkswagen Golf 4
For VW Golf 4 all sedan and estate models except 4MotionNot suitable for Golf 4 Cabriolet
Height-adjustable :Front : -25 mm to -60 mm on shock absorbersRear: -25 mm to -40 mm on cupsSteel shock absorber cartridgesFixed factory setting (hardness not adjustable)
Excellent value for money for firm lowering or roadholding
TÜV-approved

High-quality eXtremSport complete threaded combination suspension kit for BMW 3 Series E36 Saloon, Coupé, Convertible and Touring:

- 4 and 6 cylinders from 06/1992
(Not suitable for Compact)

Includes:
- 2 front shock absorbers adjustable from -40mm to -60mm
- 2 front shock absorbers adjustable from -30mm to -45mm
- 4 springs

Adjustable suspension setting via a 9-position adjusting screw acting on rebound and compression force. Handling will not be sacrificed in favour of comfort. This is the perfect way to configure your car for road use or for "sporty" track days.

Remember to order the short sway bar links,BJ42212, or the adjustable short link version, BJ42243, for a perfect fit!

Coilover Kit MTS Technik for BMW E36 (except M3, Compact and Estate)
Lowering the front and rear axles between 40-80 mm.

Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
Adjustable Shock Absorbers protected by a double layer of gold zinc and adjustments made of anodized aluminum guaranteeing increased corrosion resistance.
Coilover Kit includes springs made by Eibach, the world leader in the sports springs industry.
Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
The use of twin-tube technology guarantees stable shock absorber performance.

KW brand threaded combination suspension kit for BMW 3 series E30 :

- All models (with 45mm or 51mm strut)

Adjustable in height :
- from -40 mm to -80 mm for the front
- from -30 mm to -60 mm for the rear

CAUTION : Not suitable for M3 and 4 wheel drive !

Access KW know-how and technology to serve your E30. These shocks provide the perfect balance between sporty driving, comfort and safety. The choice of an ideal compromise for immediate pleasure and optimal cushioning !

- Version with complete 51mm strut (it is no longer necessary to modify the original strut)
- "Inox line" struts to prevent corrosion.
- Factory-preset hardness (non-adjustable), adapted to each vehicle thanks to extensive use and testing tests,
- Adjustment ring on the shock absorber body in composite material (no corrosion with the shock absorber)
- TÜV approval (guarantee of quality)

Complete MTS TECHNIK Street Series height-adjustable threaded combination suspension kit for BMW 3 series E21 4 and 6 cylinders with 45mm diameter strut:

- 315 man. 1.6L 75hp from 11/1980 to 12/1983 (engine code M10B16)
- 316 man. 1.6L 90hp from 02/1975 to 09/1980 (engine code M10B16)
- 316 1.8L 90hp from 10/1980 to 09/1983 (engine code M10B18)
- 318 98hp from 03/1975 to 07/1980 (engine code M10B18)
- 318i 105hp from 10/1980 to 12/1983 (engine code M10B18i)
- 320 4cyl 109hp from 02/1975 to 10/1982 (engine code M10B20)
- 320i 4cyl 125hp from 03/1975 to 08/1978 (engine code M10B20i)
- 320-6 6cyl 122hp from 08/1977 to 12/1982 (engine code M20B20)
- 323i 6cyl 143hp from 07/1977 to 10/1982 (engine code M20B23)

Kit includes :
- 2 front twin-tube gas-hydraulic shock absorbers adjustable from -20mm to -90mm (with adjustable suspension bearings)
- 2 rear twin-tube gas-hydraulic shock absorbers adjustable from -20mm to -95mm
(Lowering values given as a guide with standard chassis as reference)
- 4 springs
- Stops
- Adjusting wrenches
- Top mounting nuts and washers

This MTS Technik kit is assembled with main springs manufactured by EIBACH and developed in 3 versions (Street, Comfort and Sport). The springs in this Street Series kit strike the perfect balance between comfort and sportiness.

These shock absorbers are twin-tube gas-hydraulic versions. Pressurized gas acts directly on the hydraulic fluid, eliminating the "foaming" effect of oil (an undesirable phenomenon typical of oil dampers), for maximum efficiency.
Their setting is fixed, not adjustable in hardness.
Height adjustment is independent of spring preload and therefore does not interfere with spring characteristics. This ensures high-performance cushioning in all circumstances, right down to the lowest levels of lowering.
Adjustable cup springs enable custom camber adjustment.
shock absorber bodies are galvanized for corrosion resistance and longevity.

INFORMATION: the original front struts will need to be modified for installation (installation manual supplied). Depending on the lowering value adopted and the type of rims used, spacers may need to be fitted.

This kit comes with a 2-year manufacturer's warranty with no mileage limit.

Give your E21 the very best, with a top-quality MTS TECHNIK kit!

MTS TECHNIK Comfort Series height-adjustable threaded combination suspension kit for BMW 3 Series E36 Compact with standard or M-Technic chassis:

- All 4- and 6-cylinder petrol and diesel models

ATTENTION: Not suitable for Sedan, Touring, Coupé and Cabriolet!

Kit includes :
- 2 front twin-tube gas-hydraulic shock absorbers adjustable from -20mm to -90mm
- 2 rear twin-tube gas-hydraulic shock absorbers, adjustable from -10mm to -40mm
(Lowering values given as an indication with standard chassis as reference)
- 4 springs
- Stops and dust covers
- Adjusting wrench
- Top mounting nuts and washers

This MTS Technik kit is assembled with main springs manufactured by EIBACH and developed in 3 versions (Street, Comfort and Sport). The springs in this Comfort Series kit have been specially designed to maintain maximum suspension comfort in all circumstances, without sacrificing roadholding.

These shock absorbers are twin-tube gas-hydraulic versions. Pressurized gas acts directly on the hydraulic fluid, eliminating the "foaming" effect of oil (an undesirable phenomenon typical of oil dampers), for maximum efficiency.
Their setting is fixed, not adjustable in hardness.
Shock absorber bodies are galvanized for corrosion resistance and longevity.

Front and rear suspension bearings are not included.
It is advisable to replace them with new ones when changing suspensions.
The bearing anchorage area on the top of the front shock absorber rods is designed for standard mounting on original bearings.

Depending on your lowering settings and the type of rims used, you may need to replace your sway bar links with adjustable models (part no. BJ42243) and fit spacers for a perfect fit.

This kit comes with a 2-year manufacturer's warranty.

Give your E36 the best, with a top-quality MTS TECHNIK kit!

Complete MTS TECHNIK Street Series height-adjustable threaded combination suspension kit for BMW 3 Series E30 Sedan, Touring, Coupé and Cabriolet 4 and 6 cylinders with standard or M-Technic chassis and 45mm diameter strut:

- All petrol and diesel models with or without ABS

ATTENTION: Not suitable for M3 and ix 4-wheel drive versions!

Kit includes:
- 2 front twin-tube gas-hydraulic shock absorbers adjustable from -25mm to -90mm (with adjustable suspension bearings)
- 2 rear twin-tube gas-hydraulic shock absorbers adjustable from -25mm to -60mm
(Lowering values given as an indication with standard chassis as reference)
- 4 springs
- Stops and dust covers
- Adjusting wrenches
- Top mounting nuts and washers

This MTS Technik kit is assembled with main springs manufactured by EIBACH and developed in 3 versions (Street, Comfort and Sport). The springs in this Street Series kit strike the perfect balance between comfort and sportiness.

These shock absorbers are twin-tube gas-hydraulic versions. Pressurized gas acts directly on the hydraulic fluid, eliminating the "foaming" effect of oil (an undesirable phenomenon typical of oil dampers), for maximum efficiency.
Their setting is fixed, not adjustable in hardness.
Height adjustment is independent of spring preload and therefore does not interfere with spring characteristics. This ensures high-performance damping right down to the lowest levels of lowering.
Adjustable spring cups enable custom camber adjustment.
shock absorber bodies are galvanized for corrosion resistance and longevity.

INFORMATION: original front struts must be modified for installation (installation manual supplied). Depending on the lowering value adopted and the type of rims used, adjustable spacers and sway-bar links (part no. BJ42243) may be required.

This kit comes with a 2-year manufacturer's warranty with no mileage limit.

Give your E30 the very best, with a top-quality MTS TECHNIK kit!

Complete MTS TECHNIK Comfort Series height-adjustable threaded combination suspension kit for BMW 3 Series E30 Sedan, Touring, Coupé and Cabriolet 4 and 6 cylinders with standard or M-Technic chassis and 45mm diameter strut:

- All petrol and diesel models with or without ABS

ATTENTION: Not suitable for M3 and ix 4-wheel drive versions!

Kit includes:
- 2 front twin-tube gas-hydraulic shock absorbers adjustable from -25mm to -90mm (with adjustable suspension bearings)
- 2 rear twin-tube gas-hydraulic shock absorbers adjustable from -25mm to -60mm
(Lowering values given as a guide with standard chassis as reference)
- 4 springs
- Stops and dust covers
- Adjusting wrenches
- Top mounting nuts and washers

This MTS Technik kit is assembled with main springs manufactured by EIBACH and developed in 3 versions (Street, Comfort and Sport). The springs in this Comfort Series kit have been specially designed to maintain maximum suspension comfort in all circumstances, without sacrificing roadholding.

These shock absorbers are twin-tube gas-hydraulic versions. Pressurized gas acts directly on the hydraulic fluid, eliminating the "foaming" effect of oil (an undesirable phenomenon typical of oil dampers), for maximum efficiency.
Their setting is fixed, not adjustable for hardness.
Height adjustment is independent of spring preload and therefore does not interfere with spring characteristics. This ensures high-performance damping right down to the lowest levels of lowering.
Adjustable spring cups enable custom camber adjustment.
shock absorber bodies are galvanized for corrosion resistance and longevity.

INFORMATION: a modification of the original front struts will be required for installation (installation manual supplied). Depending on the lowering value adopted and the type of rims used, adjustable spacers and sway bar links (part no. BJ42243) may be required.

This kit comes with a 2-year manufacturer's warranty with no mileage limit.

Give your E30 the very best, with a top-quality MTS TECHNIK kit!

Complete MTS TECHNIK Sport Series height-adjustable threaded combination suspension kit for BMW 3 Series E30 Sedan, Touring, Coupé and Cabriolet 4 and 6 cylinders with standard or M-Technic chassis and 45mm diameter strut:

- All petrol and diesel models with or without ABS

ATTENTION: Not suitable for M3 and ix 4-wheel drive versions!

Kit includes:
- 2 front twin-tube gas-hydraulic shock absorbers adjustable from -25mm to -90mm (with adjustable suspension bearings)
- 2 rear twin-tube gas-hydraulic shock absorbers adjustable from -10mm to -50mm
(Lowering values given as a guide with standard chassis as reference)
- 4 springs
- Stops and dust covers
- Adjusting wrenches
- Top mounting nuts and washers

This MTS Technik kit is assembled with main springs manufactured by EIBACH and developed in 3 versions (Street, Comfort and Sport). The springs in this Sport Series kit have been specially designed to offer maximum sportiness without compromise, the ideal cocktail for club outings or track days.

These shock absorbers are twin-tube gas-hydraulic versions. Pressurized gas acts directly on the hydraulic fluid, eliminating the "foaming" effect of oil (an undesirable phenomenon typical of oil dampers), for maximum efficiency.
Their setting is fixed, not adjustable for hardness.
Height adjustment is independent of spring preload and therefore does not interfere with spring characteristics. This ensures high-performance damping right down to the lowest levels of lowering.
Adjustable spring cups enable custom camber adjustment.
shock absorber bodies are galvanized for corrosion resistance and long life.

INFORMATION: original front struts must be modified for installation (installation manual supplied). Depending on the lowering value adopted and the type of rims used, adjustable spacers and sway-bar links (part no. BJ42243) may be required.

This kit comes with a 2-year manufacturer's warranty with no mileage limit.

Give your E30 the very best, with a top-quality MTS TECHNIK kit!

Complete MTS TECHNIK Street Series height-adjustable threaded combination suspension kit for BMW 5 series E34 4, 6, 8 cylinders with standard chassis or sport suspensions and strut diameter 55 mm :

Sedan :
- 518i 4cyl 113hp phase 1 from 04/1989 to 05/1994 (engine code M40B18)
- 518i 4cyl 115hp phase 2 from 11/1993 to 12/1995 (engine code M43B18)
- 520i 129hp phase 1 from 06/1987 to 04/1990 (engine code M20B20)
- 520i 150hp phase 1 from 05/1990 to 08/1992 (engine code M50B20)
- 520i 150hp from 09/1992 to 12/1995 (engine code M50B20TU)
- 525i 170hp phase 1 from 06/1987 to 04/1990 (engine code M20B25)
- 525i 192hp phase 1 from 05/1990 to 08/1992 (engine code M50B25)
- 525i 192hp from 09/1992 to 12/1995 (engine code M50B25TU)
- 530i 188hp phase 1 from 06/1987 to 05/1990 (engine code M30B30)
- 530i V8 218hp from 08/1992 to 12/1995 (engine code M60B30)
- 535i 211hp phase 1 from 03/1987 to 04/1993 (engine code M30B35)
- 540i V8 286hp phase 1 from 03/1992 to 12/1995 (engine code M60B40)
- 524td 115hp phase 1 from 07/1987 to 08/1991 (engine code M21D24)
- 525tds 143hp from 02/1990 to 12/1995 (engine code M51D25)
- M5 3.6L 6cyl 315hp phase 1 from 04/1988 to 04/1992 (engine code S38B36)
- M5 3.8L 6cyl 340hp from 07/1991 to 07/1995 (engine code S38B38)

Touring :
- 518i 4cyl 113hp phase 1 from 11/1992 to 05/1994 (engine code M40B18)
- 518i 4cyl 115hp phase 1 from 11/1993 to 06/1996 (engine code M43B18)
- 520i 150hp phase 1 from 11/1990 to 08/1992 (engine code M50B20)
- 520i 150hp from 09/1992 to 06/1996 (engine code M50B20TU)
- 525i 192hp phase 1 from 12/1990 to 08/1992 (engine code M50B25)
- 525i 192hp from 09/1992 to 06/1996 (engine code M50B25TU)
- 530i V8 218hp from 05/1992 to 06/1996 (engine code M60B30)
- 540i V8 286hp from 05/1993 to 06/1996 (engine code M60B40)
- 525td 115hp from 11/1992 to 05/1996 (engine code M51D25)
- 525tds 143hp from 07/1991 to 06/1996 (engine code M51D25)
- M5 3.8L 6cyl 340hp phase 1 from 03/1992 to 08/1995 (engine code S38B38)

WARNING: Not suitable for 525ix 4-wheel drive or models with air suspension!

Kit includes :
- 2 front twin-tube gas-hydraulic shock absorbers adjustable from -20mm to -95mm (with adjustable suspension bearings)
- 2 rear twin-tube gas-hydraulic shock absorbers, adjustable from -20mm to -85mm
(Lowering values given as an indication with standard chassis as reference)
- 4 springs
- Stops
- Adjusting wrenches
- Top mounting nuts and washers

This MTS Technik kit is assembled with main springs manufactured by EIBACH and developed in 3 versions (Street, Comfort and Sport). The springs in this Street Series kit strike the perfect balance between comfort and sportiness.

These shock absorbers are twin-tube gas-hydraulic versions. Pressurized gas acts directly on the hydraulic fluid, eliminating the "foaming" effect of oil (an undesirable phenomenon typical of oil dampers), for maximum efficiency.
Their setting is fixed, not adjustable for hardness.
Height adjustment is independent of spring preload and therefore does not interfere with spring characteristics. This ensures high-performance cushioning in all circumstances, right down to the lowest levels of lowering.
Adjustable cup springs enable custom camber adjustment.
shock absorber bodies are galvanized for corrosion resistance and longevity.

INFORMATION: the original front struts will need to be modified for installation (installation manual supplied). Depending on the lowering value adopted and the type of rims used, spacers may need to be fitted.

This kit comes with a 2-year manufacturer's warranty with no mileage limit.

Give your E34 the best, with a top-quality MTS TECHNIK kit!

MTS TECHNIK threaded combination suspension kit STREET range for Audi A3 (8P)
For Audi A3 (8P) all petrol and diesel models with front axle load over 1036kg (see vehicle tare plate)
Including Quattro and S3Not suitable for RS3
STREET range: Firm setting for sporty road driving
Height-adjustable shock absorbers from -35 to -70mm for the front and from -35 to -60mm for the rear.The shock absorbers are twin-tube gas-hydraulic versions.Their setting is fixed, so their hardness cannot be adjusted.The MTS factory setting is firm, giving it a truly sporty feel.Shock absorber bodies are galvanized for corrosion resistance.A guarantee of reliability, this MTS Technik kit is assembled with springs developed and manufactured by EIBACH and is TÜV approved.
This kit comes with a 2-year manufacturer's warranty.

COMFORT rangeMTS TECHNIK threaded combination suspension kit for SEAT Leon 1 (1M)
For SEAT Leon 1 (1M ) all models from 1999 to 2006 except V6 and all-wheel drive
COMFORT range: height-adjustable, with a softer setting than the STREET range, for comfort and handling close to the original suspension.
Height-adjustable shock absorbers from -30 to -60mm.The shock absorbers are twin-tube gas-hydraulic versions.Their setting is fixed, so their hardness cannot be adjusted.Shock absorber bodies are galvanized for corrosion resistance.Urethane shock absorber stop
A guarantee of reliability, this MTS Technik kit is assembled with main springs developed and manufactured by EIBACH and is TÜV approved.

For TT(8N) 3.2 V6

Lowering front / rear: -25 mm to -50 mm

For A3 (8L) and TT (8N) version 2-wheel drive only
Not suitable for Quattro

Lowering front / rear: -30 mm to -70 mm

KW expertise and technology for your E39

- Shock absorbers adjustable in rebound using a spanner adjuster (16 possible positions)
- Stainless steel body for perfect hold over time
- Composite adjustment ring for shock absorber body (no corrosion with shock absorber)
- Complies with TÜV certification rules (proof of quality)

KW expertise and technology for your E39

- Shock absorbers adjustable in rebound (16 positions) AND compression (12 positions)
- Stainless steel body for perfect hold over time
- Composite adjustment ring for shock absorber body (no corrosion with shock absorber)
- Complies with TÜV certification rules (proof of quality)

MTS TECHNIK Comfort Series height-adjustable threaded combination suspension kit for BMW Z3 E36 Roadster and Coupé with standard or M-Technic chassis:

- All phase 1 and phase 2 models with 4 or 6 cylinders (including Z3M)

Kit includes :
- 2 front twin-tube gas-hydraulic shock absorbers adjustable from -20mm to -90mm
- 2 rear twin-tube gas-hydraulic shock absorbers adjustable from -10mm to -40mm
(Lowering values given as an indication with standard chassis as reference)
- 4 springs
- Stops and dust covers
- Adjusting wrench
- Top mounting nuts and washers

This MTS Technik kit is assembled with main springs manufactured by EIBACH and developed in 3 versions (Street, Comfort and Sport). The springs in this Comfort Series kit have been specially designed to maintain maximum suspension comfort in all circumstances, without sacrificing roadholding.

These shock absorbers are twin-tube gas-hydraulic versions. Pressurized gas acts directly on the hydraulic fluid, eliminating the "foaming" effect of oil (an undesirable phenomenon typical of oil dampers), for maximum efficiency.
Their setting is fixed, not adjustable in hardness.
Shock absorber bodies are galvanized for corrosion resistance and longevity.

Front and rear suspension bearings are not included.
It is advisable to replace them with new ones when changing suspensions.
The bearing anchorage area on the top of the front shock absorber rods is designed for standard mounting on original bearings.

Depending on your lowering settings and the type of rims used, you may need to replace your sway bar links with adjustable models (part no. BJ42243) and fit spacers for a perfect fit.

This kit comes with a 2-year manufacturer's warranty.

Give your Z3 the very best, with a top-quality MTS TECHNIK kit!