Coil over suspension kit

Complete MTS TECHNIK Street Series height-adjustable threaded combination suspension kit for BMW 5 Series E39 Touring 4 and 6 cylinders with standard or M-Technic chassis and standard suspension:

- 520i 150hp phase 1 from 09/1996 to 08/1998 (engine code M52B20) 
- 520i 150hp phase 1 from 09/1998 to 08/2000 (engine code M52B20TU)
- 520i 150hp phase 2 from 09/2000 to 07/2001 (engine code M52B20TU) 
- 520i 2.2l 170hp phase 2 from 04/2000 to 12/2003 (engine code M54B22) 
- 523i 2.5L 170hp phase 1 from 09/1996 to 08/1998 (engine code M52B25) 
- 523i 2.5L 170hp phase 1 from 09/1998 to 08/2000 (engine code M52B25TU) 
- 525i 192hp phase 1 from 11/1999 to 08/2000 (engine code M54B25)
- 525i 192hp phase 2 from 09/2000 to 12/2003 (engine code M54B25) 
- 528i 193hp phase 1 from 05/1996 to 08/2000 (engine code M52B28)
- 530i 231hp phase 1 from 11/1999 to 08/2000 (engine code M54B30)
- 530i 231hp phase 2 from 09/2000 to 12/2003 (engine code M54B30)
- 520d 4 cyl 136hp phase 1 from 06/1999 to 08/2000 (engine code M47D20)
- 520d 4 cyl 136hp phase 2 from 09/2000 to 09/2003 (engine code M47D20) 
- 525d 163hp phase 1 from 06/1999 to 08/2000 (engine code M57D25)
- 525d 163hp phase 2 from 09/2000 to 12/2003 (engine code M57D25) 
- 525tds 143hp phase 1 from 05/1996 to 02/2000 (engine code M51D25)
- 530d 184hp phase 1 from 02/1998 to 08/2000 (engine code M57D30) 
- 530d 193hp phase 2 from 09/2000 to 12/2003 (engine code M57D30) 

ATTENTION: Not suitable for models with level control (rear air suspension) or EDC electronically-controlled suspension!

Kit includes :
- 2 front twin-tube gas-hydraulic shock absorbers, adjustable from -20mm to -70mm, with springs
- 2 rear twin-tube gas-hydraulic shock absorbers, adjustable from -10mm to -40mm
(Lowering values given as an indication with standard chassis as reference)
- 2 front shock absorber stops
- 2 rear springs with pads and shims
- Adjustment wrenches

The stop, protective tube and bearing for each rear shock absorber are not supplied (you can reuse your original parts if their condition allows, although we recommend replacing them with new ones).

A guarantee of reliability, this MTS Technik kit is assembled with main springs manufactured by EIBACH and developed in 2 versions (Street and Sport). The springs in this Street Series kit strike the perfect balance between comfort and sportiness. 

These shock absorbers are twin-tube gas-hydraulic versions. Pressurized gas acts directly on the hydraulic fluid, eliminating the "foaming" effect of oil (an undesirable phenomenon typical of oil dampers), for maximum efficiency.
Their setting is fixed, not adjustable in hardness.
shock absorber bodies are galvanized for corrosion resistance and long service life.

INFORMATION: Depending on the lowering value adopted and the type of rims used, adjustable spacers and sway-bar links may be required. 

This kit comes with a 2-year manufacturer's warranty with no mileage limit.

Give your E39 the very best, with a top-quality MTS TECHNIK kit!
 

Complete MTS TECHNIK Sport Series height-adjustable threaded combination suspension kit with lowering stabilizer links for BMW 3 Series E46 4 and 6-cylinder petrol or diesel engines with standard or M-Technic chassis:

- Sedan and Touring from 04/1997 to 05/2005
- Coupé and Cabriolet from 03/1998 to 08/2006
- Compact from 01/2001 to 12/2004

ATTENTION: Not suitable for M3 or xi/xd 4-wheel drive versions!

Kit includes :
- 2 front twin-tube gas-hydraulic shock absorbers, adjustable from -20mm to -70mm
- 2 rear twin-tube gas-hydraulic shock absorbers, adjustable from -20mm to -65mm
(Lowering values given as an indication with standard chassis as reference)
- 4 springs
- Stops and dust covers
- 2 stabilizer bar links for lowering
- 1 adjustment wrench
- Top mounting nuts and washers

This MTS Technik kit is assembled with main springs manufactured by EIBACH and developed in 3 versions (Street, Comfort and Sport). The springs in this Sport Series kit have been specially designed to offer maximum sportiness without compromise, the ideal cocktail for club outings or track days.

These shock absorbers are twin-tube gas-hydraulic versions. Pressurized gas acts directly on the hydraulic fluid, eliminating the "foaming" effect of oil (an undesirable phenomenon typical of oil dampers), for maximum efficiency.
Their setting is fixed, not adjustable in hardness.
Shock absorber bodies are galvanized for corrosion resistance and longevity.

Front and rear suspension bearings are not included.
It is advisable to replace them with new ones when changing suspensions.
The bearing anchorage area on the top of the front shock absorber rods is designed for standard mounting on original bearings.

Depending on your lowering settings and the type of rims you're using, you may need to fit spacers for perfect mounting.

This kit comes with a 2-year manufacturer's warranty.

Give your E46 the best, with a top-quality MTS TECHNIK kit!

Complete MTS TECHNIK Comfort Series height-adjustable threaded combination suspension kit for BMW 3 Series E30 Sedan, Touring, Coupé and Cabriolet 4 and 6 cylinders with standard or M-Technic chassis and 51mm diameter strut:

- All petrol and diesel models with or without ABS

ATTENTION: Not suitable for M3 and ix 4-wheel drive versions!

Kit includes:
- 2 front twin-tube gas-hydraulic shock absorbers adjustable from -25mm to -90mm (with adjustable suspension bearings)
- 2 rear twin-tube gas-hydraulic shock absorbers adjustable from -25mm to -60mm
(Lowering values given as a guide with standard chassis as reference)
- 4 springs
- Stops and dust covers
- Adjusting wrenches
- Top mounting nuts and washers

This MTS Technik kit is assembled with main springs manufactured by EIBACH and developed in 3 versions (Street, Comfort and Sport). The springs in this Comfort Series kit have been specially designed to maintain maximum suspension comfort in all circumstances, without sacrificing roadholding.

These shock absorbers are twin-tube gas-hydraulic versions. Pressurized gas acts directly on the hydraulic fluid, eliminating the "foaming" effect of oil (an undesirable phenomenon typical of oil dampers), for maximum efficiency.
Their setting is fixed, not adjustable for hardness.
Height adjustment is independent of spring preload and therefore does not interfere with spring characteristics. This ensures high-performance damping right down to the lowest levels of lowering.
Adjustable spring cups enable custom camber adjustment.
shock absorber bodies are galvanized for corrosion resistance and longevity.

INFORMATION: original front struts must be modified for installation (installation manual supplied). Depending on the lowering value adopted and the type of rims used, adjustable spacers and sway-bar links (part no. BJ42243) may be required.

This kit comes with a 2-year manufacturer's warranty with no mileage limit.

Give your E30 the very best, with a top-quality MTS TECHNIK kit!

MTS TECHNIK COMFORT rangethreaded combination suspension kit for Volkswagen Golf 4
For Golf 4 sedan and estate all models including Golf 4 GTI, Golf 4 TDI and V5Not suitable for Cabriolet, V6 and 4Motion
COMFORT range: height-adjustable, with a softer setting than the STREET range, for comfort and handling close to the original suspension.
Height-adjustable shock absorbers from -30 to -60mm.The shock absorbers are twin-tube gas-hydraulic versions.Their setting is fixed, so their hardness cannot be adjusted.Shock absorber bodies are galvanized for corrosion resistance.Urethane shock absorber stop
A guarantee of reliability, this MTS Technik kit is assembled with main springs developed and manufactured by EIBACH and is TÜV approved.

Height adjustable shocks and springs, set calibration.

Compatible with Volkswagen Passat type 3B / 3BG, Saloon and Estate, 4Motion only.

(Not suitable for W8 engine)

MTS TECHNIK threaded combination suspension kit STREET range for Golf 2 Syncro and G60
For VW Golf 2 all Syncro petrol and diesel models , including G60Not suitable for Golf 2 Country
STREET range: Firm setting for sporty driving on the road
Height-adjustable shock absorbers from -25 to -80 mm.The shock absorbers are twin-tube gas-hydraulic versions.Their setting is fixed, so hardness cannot be adjusted.The MTS factory setting is firm, giving it a truly sporty feel.Shock absorber bodies are galvanized for corrosion resistance.A guarantee of reliability, this MTS Technik kit is assembled with main springs developed and manufactured by EIBACH and is TÜV approved.

Suitable for:
- Golf 3 and Golf 3 cabriolet
- Vento
- Golf 4 cabriolet

!!!! cannot be fitted on Syncro 4 x4 or estate !!!!

Front/rear lowering: -45mm to -80 mm

KW expertise and technology for your Golf

- Shock absorbers adjustable in rebound(16 positions) AND compression (12 positions)
- Stainless steel body for perfect hold over time
- Composite adjustment ring for shock absorber body (no corrosion with shock absorber)
- Complies with TÜV certification rules (proof of quality)

For Golf 4 R32 from 09/2002->

Front lowering:-10 mm to -40 mm
Rear lowering: -10 mm to -35 mm

KW expertise and technology for your New Beetle

- Stainless steel body for perfect hold over time
- Stiffness preset in the factory (not adjustable), adapted to each vehiclethanks to extensive usability and efficiency testing.
- Composite adjustment ring for shock absorber body (no corrosion with shock absorber)
- Complies with TÜV certification rules (proof of quality)

KW expertise and technology for your Golf

- Stainless steel body for perfect hold over time
- Stiffness preset in the factory (not adjustable), adapted to each vehicle thanks to extensive usability and efficiency testing.
- Composite adjustment ring for shock absorber body (no corrosion with shock absorber)
- Complies with TÜV certification rules (proof of quality)

For Golf 5 saloon, estate and Golf 5 Plus,
with front strut diameter: 55 mm,
2-wheel drive version (not 4Motion)

Front/rear lowering: -35 mm to -65 mm

!!! Important!!!
There are 2 different front strut diameters, to be checked on your vehicle before ordering

For Golf 5 R32:
- Front lowering: -20 mm to -40 mm
- Rear lowering: -15 mm to - 35 mm

For Golf 5 GTi 2.0 turbo with DSG gearbox only:
- Front lowering: -20 mm to -45 mm
- Rear lowering: -10 mm to -35 mm

For Golf 5 and Golf 5Plus (except estate), 4Motion versions:
- Front lowering: -35 mm to -65mm
Rear lowering: -30 mm to -55 mm

Suitable for:
- Golf 5 GT
- Golf 5 GTi 2.0 turbo (not for version with DSG gearbox)

Front lowering: -20 mm to -45 mm
Rear lowering: -10 mm to -35 mm

Suitable for Passat 3 saloon and estate (35i) from 1988 ->1996,
Diesel and petrol engines

KW Variant 2 high-endthreaded combination suspension kit for BMW 3-series E46 M3Coupé and Cabriolet:
Coupé :- M3 L6 3.2L 343hp from 07/1999 to 05/2006 (engine code S54B32)
Cabriolet :- M3 L6 3.2L 343hp from 01/2001 to 08/2006 (engine code S54B32)
WARNING: Not suitable for M3 CSL!
Height-adjustable (wrench supplied) :- from -20 mm to -40 mm for the front- from -20 mm to -40 mm rear
Access KW's know-how and high technology for your E46 M3. Thanks to their adjustable rebound, these shock absorbers offer the perfect balance between sporty driving, comfort and safety. The ideal compromise for immediate pleasure and optimum damping!
- Version with separate rebound adjustment at the top of the rods by means of the supplied knob (16 possible positions).-Stainless steel line" struts to prevent corrosion and enhance durability- Factory-set hardness (non-adjustable setting), adapted to each vehicle through extensive use and testing- Adjustment ring on shock absorber body in composite material (no corrosion with the shock absorber)- Stops, dust caps and top mounting nuts included- 2 stabilizer bar links for lowering included- TÜV-approved (guarantee of quality)
Front and rear suspension bearings are not included.We advise you to replace them with new ones when replacing the suspension.
This kit comes with a 2-year manufacturer's warranty.

MTS TECHNIK STREET threaded combination suspension kit for Volkswagen Golf 5
For VW Golf 5 all petrol and diesel models with front axle load over 1036kg (see vehicle tare plate)
Including Golf 6 GTI, Golf 6 R and 4Motion
STREET range: firm adjustment for sporty road driving
Height-adjustable shock absorbers from -35 to -70mm for the front and -35 to -60mm for the rear.The shock absorbers are twin-tube gas-hydraulic versions.Their setting is fixed, so their hardness cannot be adjusted.The MTS factory setting is firm, giving it a truly sporty feel.Shock absorber bodies are galvanized for corrosion resistance.A guarantee of reliability, this MTS Technik kit is assembled with springs developed and manufactured by EIBACH and is TÜV approved.
This kit comes with a 2-year manufacturer's warranty.

MTS TECHNIK STREET threaded combination suspension kit for Volkswagen Golf 6
For VW Golf 6 all petrol and diesel models with front axle load over 1036kg (see vehicle tare plate)
Including Golf 6 GTI, Golf 6 R and 4Motion
STREET range: firm adjustment for sporty road driving
Height-adjustable shock absorbers from -35 to -70mm for the front and -35 to -60mm for the rear.The shock absorbers are twin-tube gas-hydraulic versions.Their setting is fixed, so their hardness cannot be adjusted.The MTS factory setting is firm, giving it a truly sporty feel.Shock absorber bodies are galvanized for corrosion resistance.A guarantee of reliability, this MTS Technik kit is assembled with springs developed and manufactured by EIBACH and is TÜV approved.
This kit comes with a 2-year manufacturer's warranty.

Complete MTS TECHNIK Street Series height-adjustable threaded combination suspension kit for BMW 5 series E28 4 and 6 cylinders with standard chassis or sport suspension and strut diameter 52 mm :

- 518 man. 4cyl carbu 90hp from 11/1980 to 09/1984 (engine code M10B18)
- 518i 4cyl 105hp from 05/1981 to 12/1987 (engine code M10B18)
- 520i 6cyl 125hp from 11/1980 to 12/1987 (engine code M20B20)
- 525e 6cyl 2.7L 125hp from 11/1982 to 12/1987 (engine code M20B27)
- 525i 6cyl 150hp from 02/1981 to 11/1987 (engine code M30B25)
- 528i 6cyl 184hp from 09/1980 to 12/1987 (engine code M30B28)
- 535i 6cyl 3.4L 218hp from 12/1984 to 12/1987 (engine code M30B34)
- 524d 6cyl 84hp from 05/1986 to 12/1987 (engine code M21D24)
- 524td 6cyl 115hp from 10/1982 to 12/1987 (engine code M21D24T)

ATTENTION: Not suitable for M5 and M535i with M-Tech body kit or for models with air suspension!

Kit includes :
- 2 front twin-tube gas-hydraulic shock absorbers adjustable from -25mm to -110mm (with adjustable suspension bearings)
- 2 rear twin-tube gas-hydraulic shock absorbers, adjustable from -25mm to -90mm
(Lowering values given as an indication with standard chassis as reference)
- 4 springs
- Stops
- Adjusting wrenches
- Top mounting nuts and washers

This MTS Technik kit is assembled with main springs manufactured by EIBACH and developed in 3 versions (Street, Comfort and Sport). The springs in this Street Series kit strike the perfect balance between comfort and sportiness.

These shock absorbers are twin-tube gas-hydraulic versions. Pressurized gas acts directly on the hydraulic fluid, eliminating the "foaming" effect of oil (an undesirable phenomenon typical of oil dampers), for maximum efficiency.
Their setting is fixed, not adjustable for hardness.
Height adjustment is independent of spring preload and therefore does not interfere with spring characteristics. This ensures high-performance cushioning in all circumstances, right down to the lowest levels of lowering.
Adjustable cup springs enable custom camber adjustment.
shock absorber bodies are galvanized for corrosion resistance and longevity.

INFORMATION: the original front struts will need to be modified for installation (installation manual supplied). Depending on the lowering value adopted and the type of rims used, spacers may need to be fitted.

This kit comes with a 2-year manufacturer's warranty with no mileage limit.

Give your E28 the best, with a top-quality MTS TECHNIK kit!

MTS TECHNIK COMFORT rangethreaded combination suspension kit for Audi A3 (8L)
For Audi A3 (8L) all models except Quattro :- 1.6- 1.8- 1.8 20V Turbo- 1.9 TDi
COMFORT range: height-adjustable, with a softer setting than the STREET range for comfort and handling close to the original suspension.
Height-adjustable shock absorbers from -30 to -60mm.The shock absorbers are twin-tube gas-hydraulic versions.Their setting is fixed, so their hardness cannot be adjusted.Shock absorber bodies are galvanized for corrosion resistance.Urethane shock absorber stop
A guarantee of reliability, this MTS Technik kit is assembled with main springs developed and manufactured by EIBACH and is TÜV approved.