Silent blocks

Crenellated silent block mounted on the rear axle strut of the Porsche 356 B and C :

-> Porsche 356 B T5 :
- 356 B 1600 Carrera GS of 1959
- 356 B 1600 Carrera GT from 1960 to 1961
- 356 B 1600 from 1960 to 1961
- 356 B 1600 S from 1960 to 1961
- 356 B 1600 S 90 from 1960 to 1961

-> Porsche 356 B T6 :
- 356 B 2000 Carrera GS from 1962 to 1963
- 356 B 2000 Carrera GT of 1963
- 356 B 1600 from 1962 to 1963
- 356 B 1600 S from 1962 to 1963
- 356 B 1600 S90 from 1962 to 1963

-> Porsche 356 C :
- 356 C 2000 Carrera GS of 1964
- 356 C 1600 from 1964 to 1965
- 356 SC 1600 from 1964 to 1965

Depending on the model, your 356 B or 356 C can have, per rear axle strut, either :

- 2 RS91099 silent blocks (1 inside, 1 outside)
- 1 silent block RS91099 outside and 1 silent block RS91098 inside

Check before on the vehicle

Sold individually

POWERFLEX Black Series silentblocs for lower front suspension arm for

POWERFLEX Black Series silentblocs for lower front suspension arm for Porsche 911 type 997 :

- 997 phase 1 3.6 - 325 hp (M96.05) Carrera and Carrera 4 from 2005 to 2008
- 997 phase 1 3.8 - 355 hp (M97.01) Carrera S and Carrera 4S from 2005 to 2008
- 997 phase 1 3.8 X51 - 380 hp (M97.01S) Carrera S and Carrera 4S from 2007 to 2008
- 997 phase 2 3.6 - 345 hp (MA 102) Carrera and Carrera 4 from 2009 to 2012
- 997 phase 2 3.8 - 385 hp (MA 101) Carrera S and Carrera 4S from 2009 to 2012
- 997 phase 2 3.8 X51 - 408 hp (MA 101) Carrera S and Carrera 4S from 2009 to 2012
- 997 3.8 - 408 hp (MA 101) Carrera GTS from 2011 to 2012
- 997 3.8 - 408 hp (MA 101) Carrera 4 GTS of 2012
- 997 3.6 Turbo - 480 hp (M97.70) from 2006 to 2009
- 997 3.8 Turbo - 500 hp (MA 170) from 2010 to 2013
- 997 3.8 Turbo S - 530 hp (MA 170) from 2010 to 2013

This kit is suitable for the 2 front lower arms (right + left) and allows the front camber angle to be adjusted by + or - 0.75 °.

Powerflex ref : PFF57-802

Suitable for :
-E36 all engines except M3

POWERFLEX Black Series silentblocs front wishbone N°3 for Porsche 911 type 964 and 965 :

- 964 3.6 Carrera 2 and Carrera 4 from 1989 to 1994
- 964 3.6 Carrera 2 and Carrera 4 Turbo-Look Factory from 1991 to 1994
- 964 3.6 Carrera RS - 260 hp from 1992
- 964 3.3 Turbo - 320 hp from 1991 to 1992
- 965 3.6 Turbo - 360 hp from 1993 to 1994

These black polyurethane silent blocks replace the original ones. They are perfectly suited for track use. They are more resistant and more stiffer than POWERFLEX standard. They offer very precise undercarriage guidance and allow you to obtain the best of your Porsche. Ideal if you are looking for the best lap time !

The original bushes of the wishbone do not detail, the replacement by these POWERFLEX avoids you the replacement of the complete front wishbone.

Quantity needed per wishbone : 1 Kit

Suitable for:
- E30 316 to 325 i (82 ->94)

POWERFLEX HERITAGE N°9 Rear axle strut bushes for Porsche 924 S :

- 924 2.5 S - 150 cv (M44.07/M44.08) de 1986 a 1987
- 924 2.5 S - 160 cv (M44.09/M44.10) de 1988

The POWERFLEX Heritage range offers silent blocks of a higher quality than the original ones. Softer than the purple Roadseries silentblocks, they preserve comfort, while benefiting from precise driving, without vibration phenomena. Their dark gray color is perfect for owners who want to keep the original look.

This set contains 4 silent blocks and is suitable for the right and left side

Rear axle bearing SSP with silentbloc for Volkswagen Golf 1
For VW Golf 1 Sedan all models from 1975 to 1984For VW Golf 1 Cabriolet all models from 1979 to 1993
This high-quality SSP rear axle mount is protected from corrosion by an ultra-resistant powder coating, ensuring long life and safe driving with healthy rear axle behavior.
For left or right sideSold individually

For Audi 100 2.0 16V / 2.3 / 2.4D /2.5TDI / 2.6 / 2.8 except Quattro

These are reinforced engine mount bushings with adjustable rigidity via adjusting pins that enable you to modify the rigidity depending on your use (road or track). Ideal to avoid engine movement during hard braking or fast acceleration,

For E90, E92 & E93:
- M3 S65

For E90 LCI, E92 LCI & E93 LCI:
- M3 S65

Silentblocks rear axle support for BMW 3 series E36 Sedan, Touring, Coupé and Cabriolet :

- All models from 316i to 328i from 11/1989 to 12/1999

This product is sold in pairs.

Rubber between front axle and lower right frame head for VW Type 3.

Rubber buffer stop on rear suspension arm
Left or right-handside, sold per unit.

For VW 181 Thing, 08/1969 ->02/1973
Chassis: up to N°->183 2346 524.

Notched rubber support
Original part number 311 511 245
Mounted on rear axle with trumpets or universal joints:
- inside right, all models since 08/1959->.
(since chassis N° 2-528 668->)
- outside left from 08/1959 to ->08/1968
(chassis N° 2-528 668 ->118 1016 100)

For VW Beetle

Notched rubber support
Original part number 311 511 246
Mounted on rear axle with trumpets or universal joints:
- left-hand inside, all models since 08/1959->.
(since chassis N° 2-528 668->)
- outside right from 08/1959 to ->08/1968
(chassis N° 2-528 668 ->118 1016 100)

For VW Beetle

Left or right outer round Silentbloc.
Mounted on rear axle with trumpets or universal joints.

For VW Beetle

Round Silentblocks 44 mm
Kit with 2 round inner blocks and 2 round outer blocks.

For VW Beetle

Rubber stop support on arm
for rear left-hand suspension.
Original VW Mexico quality.
Sold without nuts, bolts and stops.

For Beetle, Karmann-Ghia & Type 3
versions with rear axle with flared tubes
from 08/1959-> + Mexico
from chassis no. 2 528 668->

Repair pin for rear suspension arm stop bracket.
Sold individually.
Left or right mounting

For VW Beetle, Karmann-Ghia

Rear rubber bump stop mounting.
On left or right rear suspension arm
Sold individually, as is without screws or stops.

For VW 181 (Trekker)
models with rear swing axle