Silent blocks

Front wishbone bushes for:
- 944 from 1987 to 1991
- 968 from 1992 to 1995

4 rear suspension silentblocs for:
- 911 from 1965 to 1989
- 930 3.0 from 1975 to 1977
- 912

4 POWERFLEX BLACK SERIES rear axle strut bushings for Porsche 911 and 912 until 1967 :

-> Porsche 912 up to chassis N°035 4938 :
- 912 1.6 - 90 hp (616.36) from 1966 to 1967

-> Porsche 911 up to chassis N°030 7325 :
- 911 2.0 - 130 hp (901.01/05/06) from 1965 to 1967
- 911 S 2.0 - 160 hp (901.02) of 1967

2 POWERFLEX Black Series silentblocs front anti-roll bar N°1 for Porsche 911 type 964 :

- 964 3.6 Carrera 2 from 1989 to 1994
- 964 3.6 Carrera 4 from 1989 to 1994

These black polyurethane silent blocks replace the original ones. They are perfectly suited for track use. They are more resistant and more stiffer than POWERFLEX purple Road Series. They offer very precise undercarriage guidance and allow you to obtain the best of your Porsche. Ideal if you are looking for the best lap time !

For stabilizer bar of diameter 20 mm

Quantity needed per vehicle : 1 Kit

Rear wishbone bushes for:

- 993 from 1994 to 1998

Suitable for Audis from 92 ->96:
- 80 and 90 Saloon and Estate (not for Quattro)

Front inner wishbone silentbloc for Porsche 944 phase 1 :

- 944 2.5 - 163 hp from 1982 to 1985

Suitable for right and left sides.

Number required per vehicle : 2

Sold individually

Front outer anti-roll bar bush for Porsche 968 :

- 968 3.0 from 1992 to 1995 (except Sport chassis M030)

For stabilizer bar of 25.5 mm and 26.8 mm

Quantity required per vehicle : 2

Sold individually

Front inner anti-roll bar bush for Porsche 944 :

- 944 2.5 - 163 hp from 1982 to 1985
- 944 phase 2 2.5 - 163 hp from 1985 to 1986

For stabilizer bar of 20 mm

Quantity required per vehicle : 2

Sold individually

Front inner anti-roll bar bush for Porsche 944 :

- 944 2.5 - 163 hp from 1984 to 1985
- 944 2.5 - 163 hp from 1985 to 1986
- 944 2.5 Turbo 220 hp from 1986

Only for Porsche 944 with M030 sport chassis

For stabilizer bar of 23 mm

Quantity required per vehicle : 2

Sold individually

2 POWERFLEX Road Series silentblocs rear anti-roll bar N°4 for Porsche 911 type 964 :

- 964 3.6 Carrera 2 from 1991 to 1994 - manual gearbox
- 964 3.6 Carrera 4 from 1991 to 1994

These purple polyurethane silent blocks replace the original ones. They are perfectly suited for normal to sustained use on the road.

For stabilizer bar of diameter 20 mm

Quantity needed per vehicle : 1 Kit

2 POWERFLEX Road Series silentblocs front anti-roll bar N°1 for Porsche 911 type 964 and 965 :

- 964 3.6 Carrera 2 and Carrera 4 Turbo-Look Factory from 1991 to 1994
- 964 3.3 Turbo - 320 hp from 1991 to 1992
- 965 3.6 Turbo - 360 hp from 1993 to 1994

These purple polyurethane silent blocks replace the original ones. They are perfectly suited for normal to sustained use on the road.

For stabilizer bar of diameter 21 mm

Quantity needed per vehicle : 1 Kit

2 POWERFLEX Road Series silentblocs front anti-roll bar N°1 for Porsche 911 type 964 :

- 964 3.6 Carrera 2 and Carrera 4 from 1991 to 1994 - sport chassis M 030

These purple polyurethane silent blocks replace the original ones. They are perfectly suited for normal to sustained use on the road.

For stabilizer bar of diameter 22 mm

Quantity needed per vehicle : 1 Kit

POWERFLEX Road Series silentblocs front wishbone N°3 for Porsche 911 type 964 and 965 :

- 964 3.6 Carrera 2 and Carrera 4 from 1989 to 1994
- 964 3.6 Carrera 2 and Carrera 4 Turbo-Look Factory from 1991 to 1994
- 964 3.6 Carrera RS - 260 hp from 1992
- 964 3.3 Turbo - 320 hp from 1991 to 1992
- 965 3.6 Turbo - 360 hp from 1993 to 1994

These polyurethane silent blocks replace the original ones. They are perfectly suited for normal to sustained use on the road.

The original bushes of the wishbone do not detail, the replacement by these POWERFLEX avoids you the replacement of the complete front wishbone.

Quantity needed per wishbone : 1 Kit

2 POWERFLEX Black Series silentblocs rear anti-roll bar N°4 for Porsche 911 type 964 :

- 964 3.6 Carrera 2 from 1989 to 1990 manual gearbox
- 964 3.6 Carrera 2 Turbo-Look Factory from 1991 to 1994 Tiptronic gearbox

These black polyurethane silent blocks replace the original ones. They are perfectly suited for track use. They are more resistant and more stiffer than POWERFLEX purple Road Series. They offer very precise undercarriage guidance and allow you to obtain the best of your Porsche. Ideal if you are looking for the best lap time !

For stabilizer bar of diameter 21 mm

Quantity needed per vehicle : 1 Kit

2 POWERFLEX Black Series silentblocs rear anti-roll bar N°4 for Porsche 911 type 964 C4 and RS :

- 964 3.6 Carrera 4 from 1989 to 1990
- 964 3.6 Carrera RS - 260 hp of 1992

These black polyurethane silent blocks replace the original ones. They are perfectly suited for track use. They are more resistant and more stiffer than POWERFLEX purple Road Series. They offer very precise undercarriage guidance and allow you to obtain the best of your Porsche. Ideal if you are looking for the best lap time !

For stabilizer bar of diameter 18 mm

Quantity needed per vehicle : 1 Kit

Crenellated silent block mounted on the rear axle strut of the Porsche 356 :

-> Porsche 356 :
- 356 Pre-A from 1950 to 1955
- 356 A from 1956 to 1959
- 356 B from 1960 to 1963
- 356 C from 1964 to 1965

-> Porsche 356 pre-A :
-> 356 1100 from 1950 to 1954
-> 356 1300 from 1950 to 1955
-> 356 1300 S from 1954 to 1955
-> 356 1500 from 1952 to 1955
-> 356 1500 S from 1953 to 1955

-> Porsche 356 A :
- 356 A 1300 from 1956 to 1957
- 356 A 1300 S from 1956 to 1957
- 356 A 1600 from 1956 to 1959
- 356 A 1600 S from 1956 to 1959
- 356 A 1600 Carrera GS from 1956 to 1959
- 356 A 1600 Carrera GT from 1956 to 1959

-> Porsche 356 B T5 :
- 356 B 1600 Carrera GS of 1959
- 356 B 1600 Carrera GT from 1960 to 1961
- 356 B 1600 from 1960 to 1961
- 356 B 1600 S from 1960 to 1961
- 356 B 1600 S 90 from 1960 to 1961

-> Porsche 356 B T6 :
- 356 B 2000 Carrera GS from 1962 to 1963
- 356 B 2000 Carrera GT of 1963
- 356 B 1600 from 1962 to 1963
- 356 B 1600 S from 1962 to 1963
- 356 B 1600 S90 from 1962 to 1963

-> Porsche 356 C :
- 356 C 2000 Carrera GS of 1964
- 356 C 1600 from 1964 to 1965
- 356 SC 1600 from 1964 to 1965

Depending on the model, your 356 can have, per rear axle strut, either :

- 2 RS91099 silent blocks (1 inside, 1 outside)
- 1 silent block RS91099 outside and 1 silent block RS91098 inside

Check before on the vehicle

Sold individually

Crenellated silent block mounted on the rear axle strut of the Porsche 356 B and C :

-> Porsche 356 B T5 :
- 356 B 1600 Carrera GS of 1959
- 356 B 1600 Carrera GT from 1960 to 1961
- 356 B 1600 from 1960 to 1961
- 356 B 1600 S from 1960 to 1961
- 356 B 1600 S 90 from 1960 to 1961

-> Porsche 356 B T6 :
- 356 B 2000 Carrera GS from 1962 to 1963
- 356 B 2000 Carrera GT of 1963
- 356 B 1600 from 1962 to 1963
- 356 B 1600 S from 1962 to 1963
- 356 B 1600 S90 from 1962 to 1963

-> Porsche 356 C :
- 356 C 2000 Carrera GS of 1964
- 356 C 1600 from 1964 to 1965
- 356 SC 1600 from 1964 to 1965

Depending on the model, your 356 B or 356 C can have, per rear axle strut, either :

- 2 RS91099 silent blocks (1 inside, 1 outside)
- 1 silent block RS91099 outside and 1 silent block RS91098 inside

Check before on the vehicle

Sold individually

POWERFLEX Black Series silentblocs for lower front suspension arm for

POWERFLEX Black Series silentblocs for lower front suspension arm for Porsche 911 type 997 :

- 997 phase 1 3.6 - 325 hp (M96.05) Carrera and Carrera 4 from 2005 to 2008
- 997 phase 1 3.8 - 355 hp (M97.01) Carrera S and Carrera 4S from 2005 to 2008
- 997 phase 1 3.8 X51 - 380 hp (M97.01S) Carrera S and Carrera 4S from 2007 to 2008
- 997 phase 2 3.6 - 345 hp (MA 102) Carrera and Carrera 4 from 2009 to 2012
- 997 phase 2 3.8 - 385 hp (MA 101) Carrera S and Carrera 4S from 2009 to 2012
- 997 phase 2 3.8 X51 - 408 hp (MA 101) Carrera S and Carrera 4S from 2009 to 2012
- 997 3.8 - 408 hp (MA 101) Carrera GTS from 2011 to 2012
- 997 3.8 - 408 hp (MA 101) Carrera 4 GTS of 2012
- 997 3.6 Turbo - 480 hp (M97.70) from 2006 to 2009
- 997 3.8 Turbo - 500 hp (MA 170) from 2010 to 2013
- 997 3.8 Turbo S - 530 hp (MA 170) from 2010 to 2013

This kit is suitable for the 2 front lower arms (right + left) and allows the front camber angle to be adjusted by + or - 0.75 °.

Powerflex ref : PFF57-802