Silent blocks

Rear anti-roll bar bush for Porsche 928 :

- 928 from 1978 to 1982
- 928 S - 300 hp from 1980 to 1983
- 928 S - 310 hp from 1984 to 1986
- 928 S4 from 1987 to 1991
- 928 GT from 1989 to 1991
- 928 GTS from 1992 to 1995

For stabilizer bar diameter 22 mm

Quantity required per vehicle : 2

Sold individually.

Silentblocks for upper rear suspension links on Mazda MX-5 NB and NBFL

- Position 8 and 10 on the diagram (see photo)

Fits all Mazda MX-5 NB and NBFL models

POWERFLEX silentblocks have the double advantage of being very easy to fit and being unbeatably reliable and high-performance. Harder than the original rubber, they give you even more precision and stability when the chassis is under stress. They have a longer life span and fitting them with half-silentblocks is much easier.

Silentblock located on the left or right half shaft.
This enables the upper or lower crossmember to be attached to the half shaft.
2 silentblocks required per half shaft, 4 per vehicle.
Sold individually

Compatible with Skoda Octavia type 1U with 4 wheel drive

Silentbloc rubber/metal suspension arms on left or right upper front axle for BMW 5 series E39:

Sedan :
- 520i 2.0l 150hp phase 1 from 03/1995 to 07/1998 (engine code M52B20)
- 520i 2.0l 150hp phase 1 and 2 from 08/1998 to 11/2002 (engine code M52B20TU)
- 520i 2.2l 170hp phase 2 from 03/2000 to 07/2003 (engine code M54B22)
- 523i 170hp phase 1 from 02/1995 to 07/1998 (engine code M52B25)
- 523i 170hp phase 1 from 08/1998 to 08/2000 (engine code M52B25TU)
- 525i 192hp phase 1 and 2 from 11/1999 to 07/2003 (engine code M54B25)
- 528i 193hp phase 1 from 02/1995 to 07/1998 (engine code M52B28)
- 528i 193hp phase 1 from 08/1998 to 08/2000 (engine code M52B28TU)
- 530i 231hp phase 2 from 03/2000 to 07/2003 (engine code M54B30)
- 520d 4cyl 136hp phase 1 and 2 from 06/1999 to 07/2003 (engine code M47D20)
- 525d 163hp phase 1 and 2 from 06/1999 to 07/2003 (engine code M57D25)
- 525td 115hp phase 1 from 10/1996 to 02/2000 (engine code M51D25)
- 525tds 143hp phase 1 from 04/1995 to 03/2000 (engine code M51D25)
- 530d 184hp phase 1 and 2 from 12/1997 to 07/2003 (engine code M57D30)

Touring :
- 520i 2.0l 150hp phase 1 from 09/1996 to 07/1998 (engine code M52B20)
- 520i 2.0l 150hp phase 1 and 2 from 08/1998 to 07/2001 (engine code M52B20TU)
- 520i 2.2l 170hp phase 2 from 04/2000 to 12/2003 (engine code M54B20)
- 523i 170hp phase 1 from 09/1996 to 07/1998 (engine code M52B25)
- 523i 170hp phase 1 from 08/1998 to 08/2000 (engine code M52B25TU)
- 525i 192hp phase 1 and 2 from 11/1999 to 12/2003 (engine code M54B25)
- 528i 193hp phase 1 from 05/1996 to 07/1998 (engine code M52B28)
- 528i 193hp phase 1 from 08/1998 to 08/2000 (engine code M52B28TU)
- 530i 231hp phase 1 and 2 from 11/1999 to 12/2003 (engine code M54B30)
- 520d 4 cylinders 136hp phase 1 and 2 from 06/1999 to 09/2003 (engine code M47D20)
- 525d 163hp phase 1 and 2 from 06/1999 to 12/2003 (engine code M57D25)
- 525tds 143hp phase 1 from 05/1996 to 02/2000 (engine code M51D25)
- 530d 184hp phase 1 and 2 from 02/1998 to 12/2003 (engine code M57D30)

Length metal part: 60 mm
Overall length: 68 mm
Inside diameter: 12 mm
Total diameter: 58 mm

This product is sold individually.
Need 2 quantities per vehicle.

ATTENTION: This silentbloc is not suitable for the rear wishbone or for 535i, 540i and M5 versions!

Silentbloc kit for Bmw 3 Series :
- Compatible with all Bmw 3 Series E30 Sedan, Touring, Coupé and Cabriolet versions from 09/1981 to 09/1994.
Kit of 2 wishbone silentblocs .
Silentblocs already mounted.

Set of four POWERFLEX polyurethane silent blocks for the steering rack for a VOLKSWAGEN Transporter T25 from 1979 to 1992

Cylindrical polyurethane bushes by Powerflex.

Mounting is made easy thanks to their 2-part design

Mounted on the front axle wishbones, chassis side.
Compatible with all models (except R32)

These sports bushes provide greater rigidity and reactivity for the front axle

For Golf 6 and Golf 6 Plus
(including 4 Motion)

Front stabilizer bar silencer for VW LT from 1996 to 2006.
Suitable for all versions from LT28 to LT46, with or without camper van.

Silencer located on the left or right rear axle.
It allows the upper or lower control arm to be attached to the rear axle.
2 silencers required per half axle, 4 per vehicle.
Sold individually

Compatible with Audi A3 type 8L Quattro

Silentblocks rear axle support for BMW 3 series E36 Sedan, Touring, Coupé and Cabriolet :

- All models from 316i to 328i from 11/1989 to 12/1999

This product is sold in pairs.

Lower front suspension arm silentbloc,
Diameter 12 mm. Left or right side, sold individually. Position : behind the wishbone.

For VW Transporter T4, Multivan
Years: 09/1990 -> 06/1991
up to chassis no. -> 70-M-083 342.

Silentblock for the inside of the suspension linkage on Citroën AX from 1986 to 1998.

2 required for the front axle.
Compatible with Citroën AX:
- 1L (TU9)
- 1.1L (TU1)
- 1.3L (TU24)
- 1.4L (TU3)
- 1.4L (TUD3)
- 1.5L (TUD5)

Front stabilizer bar rubber bumper, left or right, external, for Mercedes 190 (W201) with sport chassis.
Assignments :- 190 E 2.6 180/190hp (201 029)- 190 D 2.5 D 94hp (201 126) from 09/88 onwards->- 190 D 2.5 TD 126hp (201 128) from 09/88->

Set of 2 heavy duty silentblocks located on the front of the Mazda MRX-8 rear swingarm

- Position 5 on the diagram (see photo)

Complete kit for left and right arms
Fits all Mazda RX-8 models

POWERFLEX silentblocks have the double advantage of being very easy to fit and being unbeatably reliable and high-performance. Harder than the original rubber, they give you even more precision and stability when the chassis is under stress. They have a longer life span and fitting them with half-silentblocks is much easier.

Set of 2 heavy duty silentblocks located on the inside of the Mazda RX-8-s rear lower suspension arm

- Position 7 on the diagram (see photo)

Complete kit for left and right arms
Fits all Mazda RX-8 models

POWERFLEX silentblocks have the double advantage of being very easy to fit and being unbeatably reliable and high-performance. Harder than the original rubber, they give you even more precision and stability when the chassis is under stress. They have a longer life span and fitting them with half-silentblocks is much easier.

For Audi 80 type 81 from 11/73 ->07/81:
- 1.3 55hp and 60hp (ZA, FY, FZ, ZF)
- 1.5 75hp and 85hp (YJ, ZB, ZC)
- 1.6 Diesel 54hp (CR)
- 1.6 70hp, 75hp, 83hp and 85hp (YT, YS, WY, YG, YK, YN, YP)
- 1.6 100hp and 110hp (XX, YZ)

For Audi 80 type 81 from 06/84->:
- 1.3 60hp (EP)
- 1.6 Diesel 54hp (JK) JN JU
- 1.6 Turbo Diesel70hp (CY)
- 1.6 73hp and 75hp (SA, DT)
- 1.8 88/90/110/112hp (SF, DS, DZ, JV, PV)

For Audi 80 type 89, 8A:
- 1.4 65hp (SE)
- 1.6 Diesel 54hp (JK)
- 1.6 70hp and 75hp (PP, RN)
- 1.6 Turbo Diesel Intercooler 80hp (RA, SB)
- 1.6 102hp (ABB)
- 1.8 75/88/90/112/113hp (RU, SF, JN, PM, JV, NE, DZ, SD)
- 1.9 Diesel 64hp (1Y)
- 2.0 112hp (3A, AAD)
- 2.0 137hp (6A)

Silentblock located between the swing arms and the upper suspension arms of the rear axle (see photo N°2)

For E46:
- All models
(including Compact and M3)

Reinforced left or right upper control arm silencer from MEYLE HD range for BMW X5 E53:

- 4.4i V8 286hp phase 1 from 07/1999 to 09/2003 (engine code M62B44TU)
- 4.4i V8 320hp phase 2 from 01/2003 to 09/2006 (engine code N62B44)
- 3.0i 6cyl 231hp phase 1 from 08/1999 to 09/2003 (engine code M54B30)
- 3.0i 6cyl 231hp phase 2 from 10/2003 to 09/2006 (engine code M54B30)
- 4.6is V8 347hp phase 1 from 01/2001 to 09/2003 (engine code M62B46)
- 4.8is V8 360hp phase 2 from 11/2003 to 09/2006 (engine code N62B48)
- 3.0d 6cyl 184hp phase 1 from 01/2000 to 09/2003 (engine code M57D30)
- 3.0d 6cyl 218hp phase 2 from 10/2003 to 09/2006 (engine code M57D30TU)

Dimensions :
- Height: 63mm
- Outside diameter: 66mm
- Inner diameter: 14mm

This front axle part offers optimized quality compared to the original, with design defects corrected and greater strength for improved durability and roadholding.

Quantity required per vehicle: 2

This product is sold individually.

Supporting rod with upper silentblock on it.
Comes without washers and rod-fitted bushings (to be ordered separately).

Compatible with Seat Ibiza type 6K from 1994 ->1999, from chassis 6K-ZR040001-> or 6K-ZR550001->

Left or right-hand side, sold individually