Silent blocks

For X5 E53:
- All models

Anti-roll bar buffer for

- MX5 NA
- MX5 NB (except sport)
- NBFL (except sport)
- NC with 5-speed gearbox
- NCFL with 5-speed gearbox
- 11mm diameter

- Original MAZDA part

OE-type inner crenellated silencer, from left trailing arm for Porsche 924 up to chassis no. 92481 00776 :

- 924 2.0 - 125 hp (XJ/XK) from 1976 to 1978

For Roadster & Coupé:
- All models (including Z3 M)

Set of 2 heavy duty silentblocks located on the rear swing arm of the Mazda RX-8

- Position 4 on the diagram (see photo)

Complete kit for left and right arms
Fits all Mazda RX-8 models

POWERFLEX silentblocks have the double advantage of being very easy to fit and being unbeatably reliable and high-performance. Harder than the original rubber, they give you even more precision and stability when the chassis is under stress. They have a longer life span and fitting them with half-silentblocks is much easier.

Silentbloc for 25 mm anti-roll bar
Silentbloc inside diameter: 24 mm

Left or right outer round Silentbloc.
Mounted on rear axle with trumpets or universal joints.

For VW Beetle

Rubber bumper on rear axle armsNeed 2 for a complete rear axle, sold individually.Original Volkswagen Classic Parts.
For VW Combi Bay Window from 08/1967 to 07/1979

Front anti-roll bar to drop link bush for Porsche 944 phase 2 :

- 944 2.5 - 163 hp from 1985 to 1987
- 944 2.5 - 160 hp from 1988
- 944 2.5 S - 190 hp from 1987 to 1988

For stabilizer bar diameter 20 mm, 21.5 mm, 23 mm and 24 mm

Quantity required per vehicle : 2

Sold individually.

Eccentric polyurethane silentblocks of the 2 suspension arms lower and upper, to left driver's side or right passenger's side for MINI III R55, R55LCI Clubman and R56,R56LCI Sedan :

R55 Clubman:
- Cooper 1.6L 120hp from 10/2006 to 07/2010 (engine code N12B16)
- Cooper S 1.6L 175hp from 10/2006 to 07/2010 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 11/2007 to 07/2010 (engine code N14B16)
- Cooper d 1.6L 109hp from 11/2006 to 07/2010 (engine code W16D16)
- One 1.4L 95hp from 08/2008 to 02/2010 (engine code N12B14)

R55LCI Clubman:
- Cooper 1.6L 122hp from 03/2009 to 06/2014 (engine code N16B16)
- Cooper S 1.6L 184hp from 06/2009 to 06/2014 (engine code N18B16)
- Cooper S JCW 1.6L 211hp from 01/2010 to 06/2012 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 11/2011 to 06/2014 (engine code N18B16)
- Cooper SD 2.0L 143hp from 05/2009 to 06/2014 (engine code N47C20)
- Cooper D 1.6L 112hp from 04/2009 to 06/2014 (engine code N47C16)
- Cooper D 2.0L 112hp from 11/2010 to 06/2014 (engine code N47C20)
- One 1.6L 98hp from 03/2009 to 06/2014 (engine code N16B16)
- One D 1.6L 90hp from 01/2010 to 06/2014 (engine code N47C16)

R56 Sedan:
- Cooper 1.6L 120hp from 10/2005 to 08/2010 (engine code N12B16)
- Cooper S 1.6L 175hp from 11/2005 to 07/2010 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 11/2007 to 07/2010 (engine code N14B16)
- Cooper D 1.6L 109hp from 11/2005 to 07/2010 (engine code W16D16)
- One 1.4L 95hp from 12/2005 to 02/2010 (engine code N12B14)
- One D 1.6L 90hp from 06/2009 to 07/2010 (engine code W16D16)

R56LCI Sedan:
- Cooper 1.6L 122hp from 05/2009 to 11/2013 (engine code N16B16)
- Cooper S 1.6L 184hp from 07/2009 to 11/2013 (engine code N18B16)
- Cooper S JCW 1.6L 211hp from 01/2010 to 06/2012 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 11/2011 to 11/2013 (engine code N18B16)
- Cooper SD 2.0L 143hp from 06/2009 to 11/2013 (engine code N47C20)
- Cooper D 1.6L 112hp from 05/2009 to 11/2013 (engine code N47C16)
- Cooper D 2.0L 112hp from 08/2010 to 11/2013 (engine code N47C20)
- One D 1.6L 90hp from 05/2009 to 11/2013 (engine code N47C16)
- One 55kW 1.4L 75hp from 07/2009 to 11/2013 (engine code N12B14)
- One Eco 1.6L 98hp from 09/2009 to 11/2013 (engine code N16B16)
- One Eco 55kW 1.6L 75hp from 11/2009 to 11/2013 (engine code N16B16)

This kit includes:
- 2 silentblocks for the upper suspension arm (right or left)
- 2 silentblocks for the lower suspension arm (right or left)

Quantity needed per vehicle: 2 kits

1 kit is suitable for replacement of the original rubber non-eccentric silentblocks for one side only. So you will need to order 2 kits necessarily because each suspension arm must have eccentric silentblocks to allow their adjustment.

With these eccentric silentblocks, the original geometry of the rear axle can be adjusted. You will be able to change the camber and toe-in of the rear wheels to make the chassis dynamic behavior more incisive and improve cornering.

The polyurethane material offers morestiffness and better durability compared to the original rubber silentblocks. This improves handling for a sportier and safer ride.

For Polo 6N1,
all models up to chassis ->6N-XY379991

For Polo Classic 6V2,
uptochassis ->6N-X-610000:
- 1.4 54/60hp (AEX, ANX, AKV)
- 1.6 75hp (1F,AEE, ALM)
- 1.6 100hp (AFT)
- 1.7 Diesel 60hp (AKW)
- 1.8 90hp(ADD)
- 1.9 Diesel 64hp (1Y, AEY)
- 1.9 TDi 90/110hp (ALE, AHU, AFN)
- 2.0 115hp (ADC)

Pair of silentblocks for rear anti-roll bar for MX-5 NA

- Position 9 on the diagram (see photo)

Fits all Mazda MX-5 NA models

POWERFLEX silentblocks have the double advantage of being very easy to fit and being unbeatably reliable and high-performance. Harder than the original rubber, they give you even more precision and stability when the chassis is under stress. They have a longer life span and fitting them with half-silentblocks is much easier.

OE-type inner crenellated silencer, right-hand trailing arm for Porsche 924 up to chassis no. 92481 00776 :

- 924 2.0 - 125 hp (XJ/XK) from 1976 to 1978

Fixing clamp for upper or lower buffer stop.
4 required for the complete front axle, sold per unit.

For Combi Bay Window, 08/1967 ->07/1979
All models.

Screw M12 x 1.5 x 192 mm overall for VW Golf 2 COUNTRY 4x4 chassis

For Volkswagen Golf COUNTRY subframe.
The subframe of the Golf COUNTRY is equipped with 4 long fixing bolts. This bolt is the shorter version of the 2 models:
180 mm under head, pitch length 40 mm in 150 x 12 pitch

Set of 2 heavy duty silentblocks located on the rear anti-roll bar of the Mazda RX-8

- Position 8 on the diagram (see photo)

For 16mm anti-roll bar

POWERFLEX silentblocks have the double advantage of being very easy to fit and being unbeatably reliable and high-performance. Harder than the original rubber, they give you even more precision and stability when the chassis is under stress. They have a longer life span

Suitable for Audi A4 (B5) from 1994 to 2001 and Audi A6 (C5) from 1998 to 2005, all versions including 'S' and 'RS' series.

Rubber bump stop bracket on left rear suspension arm.Original VW Mexico quality.Sold unassembled, without screws or bumpers.
For Beetle, Karmann-Ghia & Type 3models with trumpet rear axlesince 08/1959-> + Mexicosince chassis N° 2 528 668->

These reinforced models located on the upper arms of the rear axle on the right and left (inner) sides of the chassis (see number 17 on the diagram) offer a better guidance in support as well as an increased longevity compared to an original version

For Roadster (E85) and Coupé (E86):
- All models including Z4 M

These polyurethane bushes are 25% more rigid than the original versions. They improve road holding and have a much longer service life,

Suitable for Audi A4 (B6) Saloon and Avant:
- All models including S4