Silent blocks

Axle silent block for all E46 versions, except M3

For rear axle lower suspension arm,

For Roadster (E85) and Coupé (E86):
- All models including Z4 M

Front lower linkage silentblock for Mazda MX-5 NA all models

Fits in front of the lower front linkage
One silentblock required per linkage
see diagram

Genuine Mazda part

Front suspension arm inner silentblocs for:
- 986 Boxster/Boxster S
- 987 Boxster/Boxster S and Cayman/Cayman S
- 996 all models
- 997 Carrera and Carrera 4 (including S models) from 07/2004 to 2007

This kit is suitable for one side only.

FORST rear stabilizer bar inner silentblock for Volkswagen Scirocco
For VW Scirocco 1 and 2 all models with 20.5mm rear stabilizer bar
Sold individuallyFORST original quality

Front anti-roll bar silentblock for Mercedes

For Mercedes W123, C123 and S123 all models

These rubber shock absorbers hold your front anti-roll bar on the chassis
A worn out silentblock will make your anti-roll bar slam against the bodywork

2 required
Sold individually

German Quality

Swingarm silentblock for:
- MGB

Quantity needed per vehicle: 4

Dimensions:
- external diameter: 31mm
- inner diameter: 16mm
- length: 40mm

Lower front suspension travel stopSold individually.
For VW Combi Bay Window from 08/1967 to 07/1979All models

Suitable for E39 Saloon and Touring (Estate)

Front central silencer on rear axle for BMW X3 E83 and LCI:

BMW X3 E83 :

- 2.0i 4cyl 150hp from 05/2003 to 07/2006 (engine code N46B20)
- 2.5i 6cyl 192hp from 02/2003 to 07/2006 (engine code M54B25)
- 3.0i 6cyl 231hp from 01/2003 to 07/2006 (engine code M54B30)
- 2.0d 4cyl 150hp from 05/2003 to 07/2006 (engine code M47D20TU)
- 3.0d 6cyl 204hp from 01/2003 to 08/2005 (engine code M57D30TU)
- 3.0d 6cyl 218hp from 03/2005 to 07/2006 (engine code M57D30TU)

BMW X3 E83 LCI :

- 2.0i 4cyl 150hp from 03/2006 to 06/2008 (engine code N46B20)
- xDrive20i 4cyl 150hp from 07/2008 to 08/2010 (engine code N46B20)
- 2.5si 6cyl 218hp from 03/2006 to 06/2008 (engine code N52B25)
- xDrive25i 6cyl 218hp from 07/2008 to 08/2010 (engine code N52B25)
- 3.0si 6cyl 272hp from 02/2006 to 06/2008 (engine code N52B30)
- xDrive30i 6cyl 272hp from 07/2008 to 08/2010 (engine code N52B30)
- xDrive18d 4cyl 2.0L 143hp from 04/2009 to 08/2010 (engine code N47D20)
- 2.0d 4cyl 150hp from 03/2006 to 08/2007 (engine code M47D20TU)
- 2.0d 4cyl 177hp from 03/2007 to 06/2008 (engine code N47D20)
- xDrive20d 4cyl 177hp from 07/2008 to 08/2010 (engine code N47D20)
- 3.0d 6cyl 218hp from 03/2006 to 06/2008 (engine code M57D30TU)
- xDrive30d 6cyl 218hp from 07/2008 to 08/2010 (engine code M57D30TU)
- 3.0sd 6cyl 286hp from 03/2006 to 06/2008 (engine code M57D30TU2TOP) --> bi-turbo
- xDrive35d 6cyl 3.0L 286hp from 07/2008 to 08/2010 (engine code M57D30TU2TOP) --> bi-turbo 3.0d engine

Need 2 for one axle
Sold individually

Classic Linerear strut muffler for Mercedes W108 to W113 (1959-1972)
Rubber located on therear axle, at the level of the strut support.
Sold individually, fits left or right side.
Fits W108, W109, W110, W111, W112, W113, see assignments for years.
Assignments :
W108 :S Class - 2.5l to 6.3l from 01/1966 to 06/1972
W109 :Heckflosse - 1.9l to 2.3l including diesel from 04/1961 to 02/1968
W110 :Heckflosse - 1.9l to 2.3l including diesel from 04/1961 to 02/1968
W111 :Heckflosse - 2.2l to 3.5l from 08/1959 to 01/1968
W112 :Heckflosse - 2.2l to 3.5l from 08/1959 to 01/1968
W113 :Pagode - 2.3l to 2.8l from 01/1963 to 03/1971

If the steering on your 1302 or 1303 shakes, replace this clamp
and the front anti-roll bar silentbloc on the tip of the chassis. Often missing and in bad condition, they are essential for good road holding as they maintain the front axle geometry by linking the suspension arm to the body via the anti-roll bar (triangulation).

For Beetles 1302 or 1303 all versions
Quality German part, 2 required per vehicle.

2 front anti-roll bar bushes for:

- 993 from 1994 to 1998

For VOLKSWAGEN Transporter T6, 28 mm diameter rear stabiliser bar.

Sway bars are available in several diameters, please measure the one on your vehicle before ordering.

Front inner anti-roll bar bush for Porsche 968 :

- 968 3.0 from 1992 to 1995 (except Sport chassis M030)

For stabilizer bar of 25.5 mm

Quantity required per vehicle : 2

Sold individually

Set of 2 heavy duty silentblocks located on the inside of the Mazda MX-5 NC et NCFL-s rear upper suspension arm

- Position 10 on the diagram (see photo)

Complete kit for left and right arms
Fits all Mazda NC and NCFL models

POWERFLEX silentblocks have the double advantage of being very easy to fit and being unbeatably reliable and high-performance. Harder than the original rubber, they give you even more precision and stability when the chassis is under stress. They have a longer life span and fitting them with half-silentblocks is much easier.

518i with M40 engine 10/89->09/91
525i/iX M20 and M50
530i M30 and M60
535i and M5

For Saloon & Touring:
- 318d/td M47 & M47N
-320d/td M47 & M47N

For Coupé & Cabriolet:
- 320Cd M47N

For Compact:
- 318d M47N
- 320d M47N

Rear anti-roll bar bush for Porsche 928 :

- 928 from 1978 to 1982
- 928 S - 300 hp from 1980 to 1983
- 928 S - 310 hp from 1984 to 1986
- 928 S4 from 1987 to 1991
- 928 GT from 1989 to 1991
- 928 GTS from 1992 to 1995

For stabilizer bar diameter 22 mm

Quantity required per vehicle : 2

Sold individually.

Silentbloc for 22 mm anti-roll bar
Silentbloc inside diameter: 21 mm