Silent blocks

For all E34 Saloon and Touring models (including 525ix and M5)

For E39 Sedan and Touring

Need 2 for one axle

Suitable for all Saloon and Touring models
(including M5)

For BMW 5 Series E39 all models including M5, except Touring

4 parts required to equip a rear axle.

For BMW 5 Series E39 Touring

For E39:
- Touring, all models
- 530 d 184hp and 193hp up to ->03/99 with manual gearbox

For X5 E53:
- All models

Silentblocks for front axle,

For Roadster (E85) and Coupé (E86):
- All models except Z4 M

Reinforced Silentbloc for MEYLE HD range left or right upper control arms for BMW 5 Series E34 Sedan and Touring:

Sedan :
- 518i 4cyl 113hp phase 1 from 04/1989 to 05/1994 (engine code M40B18)
- 518i 4cyl 115hp phase 2 from 11/1993 to 12/1995 (engine code M43B18)
- 520i 129hp phase 1 from 06/1987 to 04/1990 (engine code M20B20)
- 520i 150hp phase 1 from 05/1990 to 08/1992 (engine code M50B20)
- 520i 150hp phase 1 from 09/1992 to 03/1994 (engine code M50B20TU)
- 520i 150hp phase 2 from 04/1994 to 12/1995 (engine code M50B20TU)
- 525i 170hp phase 1 from 06/1987 to 04/1990 (engine code M20B25)
- 525i 192hp phase 1 from 05/1990 to 08/1992 (engine code M50B25)
- 525i 192hp phase 1 from 09/1992 to 03/1994 (engine code M50B25TU)
- 525i 192hp phase 2 from 04/1994 to 12/1995 (engine code M50B25TU)

Touring :
- 518i 4cyl 113hp phase 1 from 11/1992 to 05/1994 (engine code M40B18)
- 518i 4cyl 115hp phase 1 from 11/1993 to 03/1994 (engine code M43B18)
- 518i 4cyl 115hp phase 2 from 04/1994 to 06/1996 (engine code M43B18)
- 518g 4cyl gpl 115hp/101hp phase 2 from 05/1995 to 06/1996 (engine code M43B18Gas)
- 520i 150hp phase 1 from 11/1990 to 08/1992 (engine code M50B20)
- 520i 150hp phase 1 from 09/1992 to 03/1994 (engine code M50B20TU)
- 520i 150hp phase 2 from 04/1994 to 06/1996 (engine code M50B20TU)
- 525i 192hp phase 1 from 12/1990 to 08/1992 (engine code M50B25)
- 525i 192hp phase 1 from 09/1992 to 03/1994 (engine code M50B25TU)
- 525i 192hp phase 2 from 04/1994 to 06/1996 (engine code M50B25TU)

Dimensions :
- Height: 48mm
- Outside diameter: 58mm
- Inner diameter: 14mm

This front axle part offers optimized quality compared to the original, with design defects corrected and greater strength for improved durability and roadholding.

Quantity required per vehicle: 2

This product is sold individually.

Reinforced left or right upper control arm silencer from MEYLE HD range for BMW X5 E53:

- 4.4i V8 286hp phase 1 from 07/1999 to 09/2003 (engine code M62B44TU)
- 4.4i V8 320hp phase 2 from 01/2003 to 09/2006 (engine code N62B44)
- 3.0i 6cyl 231hp phase 1 from 08/1999 to 09/2003 (engine code M54B30)
- 3.0i 6cyl 231hp phase 2 from 10/2003 to 09/2006 (engine code M54B30)
- 4.6is V8 347hp phase 1 from 01/2001 to 09/2003 (engine code M62B46)
- 4.8is V8 360hp phase 2 from 11/2003 to 09/2006 (engine code N62B48)
- 3.0d 6cyl 184hp phase 1 from 01/2000 to 09/2003 (engine code M57D30)
- 3.0d 6cyl 218hp phase 2 from 10/2003 to 09/2006 (engine code M57D30TU)

Dimensions :
- Height: 63mm
- Outside diameter: 66mm
- Inner diameter: 14mm

This front axle part offers optimized quality compared to the original, with design defects corrected and greater strength for improved durability and roadholding.

Quantity required per vehicle: 2

This product is sold individually.

Reinforcedrear axle support Silentbloc from MEYLE HD range for BMW X5 E53 from 07/1999 to 09/2006:

- 4.4i V8 286hp phase 1 from 07/1999 to 09/2003 (engine code M62B44TU)
- 4.4i V8 320hp phase 2 from 01/2003 to 09/2006 (engine code N62B44)
- 3.0i 6cyl 231hp phase 1 from 08/1999 to 09/2006 (engine code M54B30)
- 4.6is V8 347hp phase 1 from 01/2001 to 09/2003 (engine code M62B46)
- 4.8is V8 360hp phase 2 from 11/2003 to 09/2006 (engine code N62B48)
- 3.0d 6cyl 184hp phase 1 from 01/2000 to 09/2003 (engine code M57D30)
- 3.0d 6cyl 218hp phase 2 from 10/2003 to 09/2006 (engine code M57D30TU)

Dimensions :
- Height: 93mm
- Inside diameter: 19mm
- Outside diameter: 95mm

This rear axle part offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding.

Need 4 quantities per vehicle.

This product is sold individually.

Reinforced left or right lower control arm silentblock from MEYLE HD range for BMW 3 Series E90, E90LCI Sedan, E91, E91LCI Touring and E92, E92LCI Coupe petrol and diesel 4-wheel drive only:

E90 Sedan :
- 325xi 218hp from 09/2004 to 07/2007 (engine code N52B25)
- 325xi 3.0L 218hp from 08/2007 to 07/2008 (engine code N53B30)
- 330xi 258hp from 02/2004 to 07/2007 (engine code N52B30)
- 330xi 272hp from 08/2007 to 07/2008 (engine code N53B30)
- 335xi 3.0L 06hp from 09/2006 to 07/2008 (engine code N54B30)
- 330xd 231hp from 02/2004 to 08/2008 (engine code M57D30TU2)

E90LCI Sedan :
- 325ixDrive 3.0L 218hp from 06/2008 to 10/2011 (engine code N53B30)
- 330ixDrive 272hp from 05/2008 to 10/2011 (engine code N53B30)
- 335ixDrive 3.0L 306hp from 07/2007 to 02/2010 (engine code N54B30)
- 335ixDrive 3.0L 306hp from 09/2009 to 10/2011 (engine code N55B30)
- 320dxDrive 4cyl 177hp from 07/2007 to 02/2010 (engine code N47D20)
- 320dxDrive 4cyl 184hp from 09/2009 to 10/2011 (engine code N47D20TU)
- 330dxDrive 245hp from 07/2007 to 10/2011 (engine code N57D30OL)

E91 Touring :
- 325xi 218hp from 01/2005 to 07/2007 (engine code N52B25)
- 325xi 3.0L 218hp from 08/2007 to 07/2008 (engine code N53B30)
- 330xi 258hp from 03/2004 to 07/2007 (engine code N52B30)
- 330xi 272hp from 08/2007 to 08/2008 (engine code N53B30)
- 335xi 3.0L 306hp from 09/2006 to 08/2008 (engine code N54B30)
- 330xd 231hp from 12/2004 to 08/2008 (engine code M57D30TU2)

E91LCI Touring :
- 325ixDrive 3.0L 218hp from 05/2008 to 05/2012 (engine code N53B30)
- 330ixDrive 272hp from 06/2008 to 05/2012 (engine code N53B30)
- 335ixDrive 3.0L 306hp from 05/2008 to 02/2010 (engine code N54B30)
- 335ixDrive 3.0L 306hp from 09/2009 to 05/2012 (engine code N55B30)
- 320dxDrive 4cyl 177hp from 07/2007 to 02/2010 (engine code N47D20)
- 320dxDrive 4cyl 184hp from 09/2009 to 05/2012 (engine code N47D20TU)
- 330dxDrive 245hp from 07/2007 to 05/2012 (engine code N57D30OL)

E92 Coupé :
- 325xi 218hp from 05/2005 to 07/2007 (engine code N52B25)
- 325xi 3.0L 218hp from 08/2007 to 02/2010 (engine code N53B30)
- 330xi 272hp from 06/2005 to 02/2010 (engine code N53B30)
- 335xi 3.0L 306hp from 03/2007 to 02/2010 (engine code N54B30)
- 320dxDrive 4cyl 177hp from 03/2008 to 02/2010 (engine code
N47D20)
- 330xd 231hp from 05/2005 to 08/2008 (engine code M57D30TU2)
- 330xd 245hp from 03/2008 to 02/2010 (engine code N57D30OL)

E92LCI Coupé :
- 325ixDrive 3.0L 218hp from 02/2010 to 06/2013 (engine code N53B30)
- 330ixDrive 272hp from 11/2008 to 06/2013 (engine code N53B30)
- 335ixDrive 3.0L 306hp from 11/2008 to 06/2013 (engine code N55B30)
- 320dxDrive 4cyl 184hp from 11/2008 to 06/2013 (engine code N47D20TU)
- 330dxDrive 245hp from 02/2010 to 06/2013 (engine code N57D30OL)

Dimensions :
- Height: 66mm
- Inside diameter: 12mm
- Outside diameter: 70mm

The silentbloc connects the suspension arm to the front subframe.

This part offers optimized quality compared to the original, with design defects corrected and greater strength for improved durability and roadholding.

Quantity required per vehicle: 2

This product is sold individually.

Deck silencer for left or right side,

For Roadster (E85):
- 2.0 i N46
- 2.2 i M54
- 2.5 i M54
- 2.5 i N52
- 2.5 si N52
- 3.0 i M54
- 3.0 si N52

For Coupé (E86):
- 3.0 si N52

Set of 2 black POWERFLEX silentblocks for rear axle of BMW 3 series E30:

- All models with 325 or 4 wheel drive)

"Black series" polyurethane version recommended for track/competition use, where maximum rigidity is required for enhanced performance.

For road use, we recommend the "purple" version which will give you the best compromise between sport and comfort, as well as a longer lifecompared to the original rubber part (reference BJ42009)

Only one set of 2 silentblocks required per vehicle.

Bearings with polyurethane silentblocks, allowing better guidance of the rear axle and an extended life span (number 30 on the diagram),

For Roadster (E85):
- 2.0 i N46
- 2.2 i M54
- 2.5 i M54
- 2.5 i N52
- 2.5 si N52
- 3.0 i M54
- 3.0 si N52
- M 3.2 S54

For Coupé (E86):
- M 3.2 S54

Inner Silentblock for front suspension arms for Bmw E9: Bmw E9 : - 2800 cs 6cyl 170hp from 12/1968 to 03/1971 (engine code m30)
- 3.0 cs 6cyl 180hp from 04/1971 to 11/1975 (engine code m30)
- 3.0 csi 6cyl 200hp from 02/1972 to 11/1975 (engine code m30)
- 3.0 csiL 6cyl 200hp from 01/1974 to 11/1975 (engine code m30)
- 3.0 csl 6cyl 206hp from 09/1972 to 06/1973 (engine code m30) Warning! Not suitable for Bmw E9 2.5 cs engine code m30. Need 2 per vehicle.
Sold individually.

Reinforced polyurethane rear axle bushes to replace the original rubber for greater rigidity and durability

For all E46:
- All models except M3

Mounted on the front suspension wishbones on the chassis side (1 silentbloc per wishbone).

Polyurethane-reinforced design for greater rigidity, responsiveness and front-end control.

Outside diameter: 45mm

ATTENTION: There are 2 different mountings. These silentblocs are designed for 45mm mounting only (not suitable for original equipment triangles with 33/36mm O.D. cylindrical silentblocs)!

Eccentric polyurethaneSilentblocks Mini R55:
Mini R55 Clubman:
- Cooper 1.6L 120hp from 10/2006 to 07/2010 (engine code N12B16)- Cooper S 1.6L 175hp from 10/2006 to 07/2010 (engine code N14B16)- Cooper S JCW 1.6L 211hp from 11/2007 to 07/2010 (engine code N14B16)- Cooper d 1.6L 109hp from 11/2006 to 07/2010 (engine code W16D16)- One 1.4L 95hp from 08/2008 to 02/2010 (engine code N12B14)- Cooper 1.6L 122hp from 03/2009 to 06/2014 (engine code N16B16)- Cooper S 1.6L 184hp from 06/2009 to 06/2014 (engine code N18B16)- Cooper S JCW 1.6L 211hp from 01/2010 to 06/2012 (engine code N14B16)- Cooper S JCW 1.6L 211hp from 11/2011 to 06/2014 (engine code N18B16)- Cooper SD 2.0L 143hp from 05/2009 to 06/2014 (engine code N47C20)- Cooper D 1.6L 112hp from 04/2009 to 06/2014 (engine code N47C16)- Cooper D 2.0L 112hp from 11/2010 to 06/2014 (engine code N47C20)- One 1.6L 98hp from 03/2009 to 06/2014 (engine code N16B16)- One D 1.6L 90hp from 01/2010 to 06/2014 (engine code N47C16)
This kit includes :
- 2 silentblocs for the upper suspension arm.- 2 silentblocs for the lower control arm.
Thanks to these eccentric silentblocks, the original geometry of the rear axle can be adjusted. You can modify the camber and toe-in of the rear wheels to make the chassis' dynamic behavior more incisive and improve cornering.
The polyurethane material offers greater rigidity and durability than the original rubber silentblocks. The result is improved roadholding for a sportier, safer ride.

Eccentric polyurethane silentblocks of the 2 suspension arms lower and upper, to left driver's side or right passenger's side for MINI III R55, R55LCI Clubman and R56,R56LCI Sedan :

R55 Clubman:
- Cooper 1.6L 120hp from 10/2006 to 07/2010 (engine code N12B16)
- Cooper S 1.6L 175hp from 10/2006 to 07/2010 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 11/2007 to 07/2010 (engine code N14B16)
- Cooper d 1.6L 109hp from 11/2006 to 07/2010 (engine code W16D16)
- One 1.4L 95hp from 08/2008 to 02/2010 (engine code N12B14)

R55LCI Clubman:
- Cooper 1.6L 122hp from 03/2009 to 06/2014 (engine code N16B16)
- Cooper S 1.6L 184hp from 06/2009 to 06/2014 (engine code N18B16)
- Cooper S JCW 1.6L 211hp from 01/2010 to 06/2012 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 11/2011 to 06/2014 (engine code N18B16)
- Cooper SD 2.0L 143hp from 05/2009 to 06/2014 (engine code N47C20)
- Cooper D 1.6L 112hp from 04/2009 to 06/2014 (engine code N47C16)
- Cooper D 2.0L 112hp from 11/2010 to 06/2014 (engine code N47C20)
- One 1.6L 98hp from 03/2009 to 06/2014 (engine code N16B16)
- One D 1.6L 90hp from 01/2010 to 06/2014 (engine code N47C16)

R56 Sedan:
- Cooper 1.6L 120hp from 10/2005 to 08/2010 (engine code N12B16)
- Cooper S 1.6L 175hp from 11/2005 to 07/2010 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 11/2007 to 07/2010 (engine code N14B16)
- Cooper D 1.6L 109hp from 11/2005 to 07/2010 (engine code W16D16)
- One 1.4L 95hp from 12/2005 to 02/2010 (engine code N12B14)
- One D 1.6L 90hp from 06/2009 to 07/2010 (engine code W16D16)

R56LCI Sedan:
- Cooper 1.6L 122hp from 05/2009 to 11/2013 (engine code N16B16)
- Cooper S 1.6L 184hp from 07/2009 to 11/2013 (engine code N18B16)
- Cooper S JCW 1.6L 211hp from 01/2010 to 06/2012 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 11/2011 to 11/2013 (engine code N18B16)
- Cooper SD 2.0L 143hp from 06/2009 to 11/2013 (engine code N47C20)
- Cooper D 1.6L 112hp from 05/2009 to 11/2013 (engine code N47C16)
- Cooper D 2.0L 112hp from 08/2010 to 11/2013 (engine code N47C20)
- One D 1.6L 90hp from 05/2009 to 11/2013 (engine code N47C16)
- One 55kW 1.4L 75hp from 07/2009 to 11/2013 (engine code N12B14)
- One Eco 1.6L 98hp from 09/2009 to 11/2013 (engine code N16B16)
- One Eco 55kW 1.6L 75hp from 11/2009 to 11/2013 (engine code N16B16)

This kit includes:
- 2 silentblocks for the upper suspension arm (right or left)
- 2 silentblocks for the lower suspension arm (right or left)

Quantity needed per vehicle: 2 kits

1 kit is suitable for replacement of the original rubber non-eccentric silentblocks for one side only. So you will need to order 2 kits necessarily because each suspension arm must have eccentric silentblocks to allow their adjustment.

With these eccentric silentblocks, the original geometry of the rear axle can be adjusted. You will be able to change the camber and toe-in of the rear wheels to make the chassis dynamic behavior more incisive and improve cornering.

The polyurethane material offers morestiffness and better durability compared to the original rubber silentblocks. This improves handling for a sportier and safer ride.