Silent blocks

Inside silent block, diameter 21 mm for the sway bar, 22 mm diameter for VOLKSWAGEN LT from 1975 to1982.

Silent-block retainer bracket on stabilizer bar for VW Transporter T25 from 1985 to 1992 and since chassis #24-E-145001.

For Volkswagen Golf COUNTRY subframe
Dimensions: 135 mm long under head, 10 x 150 thread over 30 mm.

Volkswagen Classic Parts reproduction part.

These reinforced models located on the rear axle sway bar link rods (see No. 45 on the diagram) offer better guidance under pressure as well as greater durability compared with the original part

For Saloon, Touring, Coupé & Convertible:
- All models (except M3)

Set of two polyurethane silent blocks for the front lower suspension arms
Position: in front of the wishbone.

For VOLKSWAGEN Transporter T4 from 1997 to 2003 from chassis n° 70-T-200001->.
including Synchro version (4x4).

Rubber stopper on rear suspension arm
Left or right, sold individually.
OriginalClassic Parts unit

For Kombi Split & Bay Window, 03/1955 ->07/1979

These reinforced models offer better guidance of the rear axle under pressure as well as greater durability compared with the original part,
Position 12 on the diagram,

For Saloon & Touring:
- All models (including M5)

These reinforced models offer better guidance of the rear axle under pressure as well as greater durability compared with the original part,
Position 15 on the diagram, located on the top of the integral link

For E60 & E61:
- All models (except M5)

For E60 LCI & E61 LCI:
- All models (except M5)

These reinforced models located on the rear axle sway bar link rods (see No. 15 on the diagram) offer better guidance under pressure as well as greater durability compared with the original part

For E28:
- All models

Set of two POWERFLEX polyurethane interior silent blocks for the rear wishbone for a VOLKSWAGEN Transporter T4 from 1990 to 2003

1 rubber buffer stop for front left or right-hand axle.

For VW Combi Split T1
Years:08/1963 ->07/1967
since chassis no. 1 144 282->

Set of 2 rear axle frame silentblocs, MEYLE Original Quality, delivered with screws and washers, for Mercedes W123 Saloon:
- 200 84/94hp (123 020) up to chassis ->125651
- 230 109hp (123 023) up to chassis ->157706
- 250 129/140hp (123 026)
- 280 156hp (123 030)
- 280 E 185hp (123 033)
- 200 D 55/60hp (123 120)
- 220 D 60hp (123 126)
- 240 D 65/72hp (123 123) up to chassis ->050107

For Mercedes C123 Coupé:
- 230 C 109hp (123 043) up to chassis ->015205
- 280 C 156hp (123 050)
- 280 CE 185hp (123 053)

Silent rear axle block MEYLE HD for BMW X3 E83 and LCI :

BMW X3 E83 :

- 2.0i 4cyl 150hp from 05/2003 to 07/2006 (engine code N46B20)
- 2.5i 6cyl 192hp from 02/2003 to 07/2006 (engine code M54B25)
- 3.0i 6cyl 231hp from 01/2003 to 07/2006 (engine code M54B30)
- 2.0d 4cyl 150hp from 05/2003 to 07/2006 (engine code M47D20TU)
- 3.0d 6cyl 204hp from 01/2003 to 08/2005 (engine code M57D30TU)
- 3.0d 6cyl 218hp from 03/2005 to 07/2006 (engine code M57D30TU)

BMW X3 E83 LCI :

- 2.0d 4cyl 150hp from 03/2006 to 08/2007 (engine code M47D20TU)
- 3.0d 6cyl 218hp from 03/2006 to 06/2008 (engine code M57D30TU)

These high-quality silentblocs offer optimized quality compared to the original, with design faults corrected for longer life and greater operating efficiency.

Set of 2 heavy duty silentblocks located on the inside of the Mazda MX-5 NC et NCFL-s front upper suspension arm

- Position 9 on the diagram (see photo)

Complete kit for left and right arms
Fits all Mazda NC and NCFL models

POWERFLEX silentblocks have the double advantage of being very easy to fit and being unbeatably reliable and high-performance. Harder than the original rubber, they give you even more precision and stability when the chassis is under stress. They have a longer life span and fitting them with half-silentblocks is much easier.

Kit of 4 silentblocks for suspension arms in reinforced version for a better guidance of the rear axle, allows to remake the 2 arms,

For Golf 2:
- All Syncro models including Golf 2 Rallye

2 POWERFLEX Road Series silentblocs rear anti-roll bar N°4 for Porsche 911 type 964 C2 Tiptronic :

- 964 3.6 Carrera 2 Tiptronic from 1990 to 1994

These purple polyurethane silent blocks replace the original ones. They are perfectly suited for normal to sustained use on the road.

For stabilizer bar of diameter 19 mm

Quantity needed per vehicle : 1 Kit

Front lower linkage outer silentblock for Mazda MX-5 NB and NBFL

For NB and NBFL all models including sport chassis

Mounts on the wheel side in front of the lower left or right rear linkage
One required per linkage, two per vehicle
See diagram

Sold individually
Genuine Mazda part

These reinforced models located on the upper arms of the rear axle on the right and left (inner) sides of the chassis (see number 17 on the diagram) offer a better guidance in support as well as an increased longevity compared to an original version

For Roadster (E85) and Coupé (E86):
- All models including Z4 M

Set of 4 reinforced half-silentblocks located on the front of the front lower suspension arms on MX-5 NB and NBFL cars

- Position 1 on the diagram (see photo)
Kit for both linkages, left and right

Fits all Mazda MX-5 NB and NBFL models

POWERFLEX silentblocks have the double advantage of being very easy to fit and being unbeatably reliable and high-performance. Harder than the original rubber, they give you even more precision and stability when the chassis is under stress. They have a longer life span and fitting them with half-silentblocks is much easier.

Set of two POWERFLEX polyurethane interior silent blocks for a 24 mm rear sway bar for the VOLKSWAGEN Transporter T5 from 2003 to 2015.