Silent blocks

Front rear roll bar silentblocks made of polyurethane POWERFLEX for BMW Z3 E36 Roadster and Coupé:

Roadster:
- 1.8 4cyl 115hp phase 1 from 12/1994 to 09/1998 (engine code M43B18)
- 1.9 16V 4cyl 140hp phase 1 from 04/1995 to 04/1999 (engine code M44B19)
- 1.8 4cyl 1.9L 118hp phase 2 from 04/1999 to 08/2000 (engine code M43B19TU)
- 1.9i 4cyl 118hp phase 2 from 08/2000 to 06/2002 (engine code M43B19TU)
- 2.0 150hp phase 2 from 07/1998 to 10/2000 (engine code M52B20TU)
- 2.2i 170hp phase 2 from 12/1999 to 06/2002 (engine code M54B22)
- 2.8 192hp phase 1 from 07/1996 to 08/1998 (engine code M52B28)
- 2.8 192hp phase 1 from 09/1998 to 03/1999 (engine code M52B28TU)
- 2.8 193hp phase 2 from 04/1999 to 05/2000 (engine code M52B28TU)
- 3.0i 231hp phase 2 from 09/1999 to 06/2002 (engine code M54B30)M52B28TU
- M 3.2L 321hp phase 1 from 04/1996 to 06/2000 (engine code S50B32)
- M 3.2L 325hp phase 2 from 03/2000 to 05/2002 (engine code S54B32)

Coupé :
- 2.8 192hp phase 1 from 05/1997 to 08/1998 (engine code M52B28)
- 2.8 193hp phase 1 from 09/1998 to 03/1999 (engine code M52B28TU)
- 2.8 193hp phase 2 from 04/1999 to 05/2000 (engine code M52B28TU)
- 3.0i 231hp from 09/1999 to 06/2002 (engine code M54B30)
- M 3.2L 321hp phase 1 from 09/1997 to 07/2000 (engine code S50B32)
- M 3.2L 325hp phase 2 from 03/2000 to 05/2002 (engine code S54B32)

Diameter: 59 mm

These supporting silentblocks of the rear axle(n°4 on the diagram) will advantageously replace the original rubber parts. The driving behavior of the chassis will be improved as well as the durability of the elements thanks to their robust polyurethane composition.

This complete kit is suitable for the left driver's side and right passenger's side.

Polyurethane non-eccentric swingarm longitudinal POWERFLEX silentblocks for BMW Z3 Roadsterand Coupe:

Roadster :
- 1.8 4cyl 115hp phase 1 from 12/1994 to 09/1998 (engine code M43B18)
- 1.9 16V 4cyl 140hp phase 1 from 04/1995 to 04/1999 (engine code M44B19)
- 1.8 4cyl 1.9L 118hp phase 2 from 04/1999 to 08/2000 (engine code M43B19TU)
- 1.9i 4cyl 118hp phase 2 from 08/2000 to 06/2002 (engine code M43B19TU)
- 2.0 150hp phase 2 from 07/1998 to 10/2000 (engine code M52B20TU)
- 2.2i 170hp phase 2 from 12/1999 to 06/2002 (engine code M54B22)
- 2.8 192hp phase 1 from 07/1996 to 08/1998 (engine code M52B28)
- 2.8 192hp phase 1 from 09/1998 to 03/1999 (engine code M52B28TU)
- 2.8 193hp phase 2 from 04/1999 to 05/2000 (engine code M52B28TU)
- 3.0i 231hp phase 2 from 09/1999 to 06/2002 (engine code M54B30)M52B28TU
- M 3.2L 321hp phase 1 from 04/1996 to 06/2000 (engine code S50B32)
- M 3.2L 325hp phase 2 from 03/2000 to 05/2002 (engine code S54B32)

Coupé:
- 2.8 192hp phase 1 from 05/1997 to 08/1998 (engine code M52B28)
- 2.8 193hp phase 1 from 09/1998 to 03/1999 (engine code M52B28TU)
- 2.8 193hp phase 2 from 04/1999 to 05/2000 (engine code M52B28TU)
- 3.0i 231hp from 09/1999 to 06/2002 (engine code M54B30)
- M 3.2L 321hp phase 1 from 09/1997 to 07/2000 (engine code S50B32)
- M 3.2L 325hp phase 2 from 03/2000 to 05/2002 (engine code S54B32)

Diameter: 30 mm

These swing arm shoes of rear axle(n°5 on the diagram) will advantageously replace the original non-eccentric rubber parts. The driving behavior of the chassis will be improved as well as the durability of the elements thanks to their robust polyurethane composition.

This complete kit of 4 silentblocks is suitable for the 2 arms, left side driver and right side passenger.

For E30 M3 from 09/87 ->

For E36 all models except M3

For Audi 100 type 43/44:
- All, since chassis 43-C-007001->

Silencer for front lower suspension arm, behind the front axle.
For left or right side, sold individually.

Compatible for Audi A6 C5 type 4B2 / 4B5

For models with 18.5 mm anti-roll bar (code 0BC)

For models with 20.7 mm anti-roll bar (code 0BE)

More flexible polyurethane version, specific for Golf 4 and Bora diesel / TDi engines

POWERFLEX Black Series silentblocs front wishbone N°2 for Porsche 911 type 964 and 965 :

- 964 3.6 Carrera 2 and Carrera 4 from 1989 to 1994
- 964 3.6 Carrera 2 and Carrera 4 Turbo-Look Factory from 1991 to 1994
- 964 3.6 Carrera RS - 260 hp from 1992
- 964 3.3 Turbo - 320 hp from 1991 to 1992
- 965 3.6 Turbo - 360 hp from 1993 to 1994

These black polyurethane silent blocks replace the original ones. They are perfectly suited for track use. They are more resistant and more stiffer than POWERFLEX Road Series. They offer very precise undercarriage guidance and allow you to obtain the best of your Porsche. Ideal if you are looking for the best lap time !

The original bushes of the wishbone do not detail, the replacement by these POWERFLEX avoids you the replacement of the complete front wishbone.

Quantity needed per wishbone : 1 Kit

For Audi 80 and 90:
- 79 ->87 up to chassis ->81-D-077 973
- Coupé 81 ->88 4-cylinder up to chassis->85-F-166 993

These polyurethane bushes are 25% more rigid than the original versions. They improve road holding and have a much longer service life,

Suitable for Audi A4 (B6) Saloon and Avant:
- All models including S4

Suitable for Audi A4 (B5) from 1994 to 2001 and Audi A6 (C5) from 1998 to 2005, all versions including 'S' and 'RS' series.

Set of 2 heavy duty silentblocks located on the rear part of the front axle lower linkages

- Position 0 on the diagram (see photo)

Kit for both linkages
Fits all Mazda RX-8 models

POWERFLEX silentblocks have the double advantage of being very easy to fit and being unbeatably reliable and high-performance. Harder than the original rubber, they give you even more precision and stability when the chassis is under stress. They have a longer life span and fitting them with half-silentblocks is much easier.

Silentblocs POWERFLEX Black Series front lower control arms for Porsche 911 type 996:

- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera from 1998 to 2001
- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera 4 from 1998 to 2001
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 3.6 Turbo - 420 hp (M96.70) from 2000 to 2005
- 996 3.6 Turbo X50 - 450 hp (M96.70) from 2001 to 2005
- 996 3.6 Turbo S - 450 hp (M96.70) from 2005
- 996 3.6 GT2 - 462 hp (M96.70SL) from 2001 to 2004
- 996 3.6 GT2 - 483 hp (M96.70SL) from 2005

This kit is suitable for the 2 front lower links (right-left) and allows front camber angle adjustment of 0.75° or less.

These black polyurethane block silents replace theoriginal ones. They are ideal for track use. They are stronger and stiffer than POWERFLEX Road Series. They offer very precise drivetrain guidance, so you can get the most out of your chassis. Ideal for time-hunting!

As the arm's original silent blocks are not available in detail, replacing them with these POWERFLEXs saves you having to replace the entire front arm.

Ref Powerflex: PFF57-801BLK

Hydraulic version, if you have the old fitment with the rubber version it is recommended to replace the other side at the same time, sold per pair,

For E60 & E61:
- All models including M5 (except xi and xd)

For E60 LCI & E61 LCI:
- All models including M5 (except xi and xd)

2 POWERFLEX Road Series silentblocs rear anti-roll bar N°4 for Porsche 911 type 964 C2 Tiptronic :

- 964 3.6 Carrera 2 Tiptronic from 1990 to 1994

These purple polyurethane silent blocks replace the original ones. They are perfectly suited for normal to sustained use on the road.

For stabilizer bar of diameter 19 mm

Quantity needed per vehicle : 1 Kit

Front inner anti-roll bar bush for Porsche 968 :

- 968 3.0 from 1992 to 1995 (except Sport chassis M030)

For stabilizer bar of 25.5 mm

Quantity required per vehicle : 2

Sold individually

Rear lower coupling arm bushes for:
- 986 Boxster all models from 1997 to 2004
- 987 Boxster and Cayman all models from 2005 to 2012
- 996 all models from 1998 to 2005
- 997 all models from 2005 to 2012 (excluding GT2-RS)

Inner rear suspension arm bushes for:
- 996 all models from 1998 to 2005
- 997 all models from 2005 to 2012