Silent blocks

For stabiliser bar with 18mm diameter

For models with 20.7 mm anti-roll bar (code 0BE)

For Passat 3 saloon 04/88 -> 09/93:

-1.6 72hp (RF)
- 1.6 75hp (EZ, 1F, ABN)
- 1.6 turbo Diesel 80hp (RA, SB)
- 1.8 75hp (AAM)
- 1.890hp (RP, ABS)
- 1.9 Diesel 64hp (1Y)
- 1.9 turbo Diesel 75hp (AAZ)

Enables the rear axle to be mounted to the body,

For Polo type 86 and 86C:
- All models

Deck silentblock for Bmw z3 :
Bmw z3 E36 Roadster :
- 1.8 4cyl 115hp phase 1 from 12/1994 to 09/1998 (engine code M43B18)- 1.9 16V 4cyl 140hp phase 1 from 04/1995 to 04/1999 (engine code M44B19) - 1.8 4cyl 1.9L 118hp phase 2 from 01/1998 to 07/2000 (engine code M43B19TU)- 1.9i 4cyl 118hp phase 2 from 08/2000 to 06/2002 (engine code M43B19TU)- 2.0 150hp phase 2 from 07/1998 to 10/2000 (engine code M52B20TU)- 2.2i 170hp phase 2 from 12/1999 to 06/2002 (engine code M54B22)- 2.8 192hp phase 1 from 07/1996 to 08/1998 (engine code M52B28)- 2.8 192hp phase 1 from 09/1998 to 03/1999 (engine code M52B28TU)- 2.8 193hp phase 2 from 04/1999 to 05/2000 (engine code M52B28TU)
Bmw z3 E36 Coupé:
- 2.8 192hp phase 1 from 05/1997 to 08/1998 (engine code M52B28)- 2.8 193hp phase 1 from 09/1998 to 03/1999 (engine code M52B28TU)- 2.8 193hp phase 2 from 04/1999 to 05/2000 (engine code M52B28TU)
Warning! Not suitable for other Bmw z3 E36 engines.

Rear lower wishbone outer front silencer for Mazda MX-5 NA all models

Mounts on wheel side of left or right rear lower wishbone
Need one per wishbone, two per vehicle
See drawing

Sold individually
Genuine Mazda part

For more precise steering and road holding,
this set of reinforced urethane silentblocs improves
the triangulation of the front axle of your or 1303:
- 2 anti-roll bar silentblocs on chassis
- 4 silentblocs between suspension arm and bar
- 2 suspension arm silentblocs
Original diameter.

For Beetle 1303 from 08/1973
version with 2 mounting point shock absorbers
from chassis no. 134 2000 001->

Upper rear suspension leaf support for Porsche 944 :
- 944 phase 1 - 2.5 - 163hp (M44.01 to 04) from 1982 to 1985
- 944 phase 2 - 2.5 - 163hp (M44.05 to 08) from 1985 to 1987- 944 phase 2 - 2.5 - 160hp (M44.09/M44.10) from 1988- 944 phase 2 - 2.5 S - 190hp (M44.40) from 1987 to 1988- 944 phase 2 - 2.7 - 165hp (M44.11/M44.12) from 1989- 944 phase 2 - 3.0 S2 - 211hp (M44.41) from 1989 to 1991
- 944 2.5 Turbo - 220hp (M44.50/M44.51) from 1986 to 1988- 944 2.5 Turbo S/Cup M578 - 250hp (M44.52) from 1988- 944 2.5 Turbo - 250hp (M44.52) from 1989 to 1991
Quantity required per vehicle: 2

Inner silentbloc connected to the anti-roll bar
Diameter: 34 mm

For VW Utility LT, 12/1982 ->12/1995
Chassis no. 28-D-007 274 ->21-T-010 000.

For Golf 5 and Golf 5 Plus
(including 4 Motion)

Inside silent block, diameter 21 mm for the sway bar, 22 mm diameter for VOLKSWAGEN LT from 1975 to1982.

Silentblock on front tie rod, original part number 281407179

1 unit per control arm together with part no. 281407180

Set of two POWERFLEX exterior polyurethane silent blocks for a 19 mm sway bar for a VOLKSWAGEN Transporter T25 from 1986 to 1992 from chassis n°24-G-118222->

Set of two POWERFLEX interior polyurethane silent blocks for a 19 mm sway bar for a VOLKSWAGEN Transporter T25 from 1986 to 1992 from chassis n°24-G-118222->

Set of two POWERFLEX interior polyurethane silent blocks for a 21 mm sway bar for a VOLKSWAGEN Transporter T25 from 1979 to 1985 up to chassis n°24-E-145000

Set of two POWERFLEX interior polyurethane silent blocks for a 21 mm sway bar for a VOLKSWAGEN Transporter T25 from 1986 to 1992 up to chassis n°24-E-145001->

Front cradle silencer for VW Transporter T5 from 2010 to 2015 from chassis n°WV1ZZZ7HZA-200001 or n°WV1ZZZ7JZA-200001

These reinforced models located on the rear axle sway bar link rods (see No. 15 on the diagram) offer better guidance under pressure as well as greater durability compared with the original part

For E28:
- All models

MEYLE HD upper control arm dampers for Bmw 6 Series:

- Compatible with all Bmw 6 Series E63 Coupé and E64 Cabriolet versions from 05/2002 to 07/2010 including M6 version engine code s85.

This front axle part offers optimized quality compared with the original, with design defects corrected and greater strength for improved durability and handling.

POWERFLEX silentblocks on rear guide arm for Bmw 7 series:

- Compatible with all Bmw 7 Series E65 and E66 versions from 02/2000 to 10/2006 including Alpina B7 engine code n62.

These reinforced models offer better rear axle guidance and longer life than the original version.

Position 13 on diagram.

Sold in pairs.