Silent blocks

For A4 Sport, Avant and Quattro

For Golf 4 and Bora, all models including R32 and 4Motion

Polyurethane provides better engine stability during acceleration and deceleration.
These bushes are to be installed in place of the original bushes

These are reinforced engine mount bushings with adjustable rigidity via adjusting pins that enable you to modify the rigidity depending on your use (road or track). Ideal to avoid engine movement during hard braking or fast acceleration,

For E36 Saloon, Touring, Coupé & Compact
- 320 i
- 323 i
- 325 i
- 328 i
- M3
(not suitable for Compact or the diesel engine version)

Silentbloc caoutchouc de support de train arrière

Compatible pour Volkswagen Golf 1 Berline, Cabriolet, Jetta 1 et Scirocco

Besoin de 2 pièces par véhicule.

Original Volkswagen Classic Parts

FORST rear stabilizer bar outer silencer for Volkswagen Golf 1
For VW Golf 1 Sedan and Cabriolet all models with rear stabilizer bar diameter 20.5mm
FORST original quality

Silentblocrubber left or right on torsion bar for VW Combi Bay Window all models from 1968 to 1979.
Indispensable part for good handling and comfort driving, a good condition torsion bar silentblock preserves your quality and precision driving.
Need 4 for a complete rear end.
Sold by the unit.

The bumper is designed to limit excessive suspension movement, providing protection against violent shocks and damage when the suspension reaches its maximum amplitude.
This rubber bumper on left or right rear suspension arm, fits VW Combi Bay Window from 08/1967 to 07/1979.Sold individually

These reinforced models located on the rear part of the front suspension arms (see number 1 on the diagram) offer a better guidance in support as well as an increased longevity compared to an original version

For Z3 E36 Roadster :
- M 3.2L 321hp phase 1 from 04/1996 to 06/2000 (engine code S50B32) --> E36/7S
- M 3.2L 325hp phase 2 from 03/2000 to 05/2002 (engine code S54B32) --> E36/7S

For Z3 E36 Coupe :
- M 3.2L 321hp phase 1 from 09/1997 to 07/2000 (engine code S50B32) --> E36/8S
- M 3.2L 325hp phase 2 from 03/2000 to 05/2002 (engine code S54B32) --> E36/8S

Eccentric version for a larger caster angle
Kit for the 2 suspension wishbones
Polyurethane: for more rigidity and responsiveness of the front axle

High quality part, it is necessary2 per vehicle.

For Old Beetle 1302 or 1303 all models.

If the steering on your 1302 or 1303 shakes, replace these front anti-roll bar silentblocs on the arm. Often in bad condition, they are essential for good road holding as they maintain the front axle geometry by linking the suspension arm to the body via the anti-roll bar (triangulation).

For Beetles 1302 or 1303 up to ->07/1973 (cast iron arm)
up to chassis no. ->133 3200 000 (Cabriolet ->153)
Superior quality part, 2 required for vehicle.

Swingarm silentblock for:
- MGB

Quantity needed per vehicle: 4

Dimensions:
- external diameter: 31mm
- inner diameter: 16mm
- length: 40mm

For Audi A3 8L S3 Quattro :
- 1.8 210hp (APY, AMK)
- 1.8 225hp (BAM)

For TT 8N :
- 2-wheel drive from chassis 8N-Y-060001->
- Quattro all models

Mounted on the front suspension wishbones on the chassis side (1 silentbloc per wishbone).

Polyurethane-reinforced design for greater rigidity, responsiveness and front-end steering.

Outside diameter: 45mm

ATTENTION: There are 2 different mountings. These silentblocs are designed for 45mm mounting only (not suitable for original equipment triangles with 33/36mm O.D. cylindrical silentblocs)!

BGA front left wishbone silencer for z4:
Bmw z4 E85 Roadster:
- 2.0i 4 cyl 150hp phase 1 from 06/2004 to 12/2005 (engine code N46B20)- 2.0i 4 cyl 150hp phase 2 from 01/2006 to 08/2008 (engine code N46B20)- 2.2i 170hp phase 1 from 12/2002 to 11/2005 (engine code M54B22)- 2.5i 192hp phase 1 from 04/2002 to 11/2005 (engine code M54B25)- 2.5i 177hp phase 2 from 10/2004 to 07/2008 (engine code N52B25)- 2.5si 218hp phase 2 from 10/2004 to 08/2008 (engine code N52B25)- 3.0i 231hp phase 1 from 04/2002 to 11/2005 (engine code M54B30)- 3.0si 265hp phase 2 from 10/2004 to 07/2008 (engine code N52B30)
Bmw z4 E86 Coupé:
- 3.0si 265hp from 10/2005 to 08/2008 (engine code N52B30)

Kit of 2 POWERFLEX silentblocs for rear axle of BMW series 3 E30 :

- All models (except 325 ix 4 wheel drive)

Polyurethane version recommended for sporty driving use on the road which will provide more rigidity and reactivity of the rear axle as well as greater longevity compared to the original rubber part, without sacrificing comfort.

For track / competition use where rigidity must be maximum for more rigidity to the detriment of comfort, we recommend the "black" version (reference BJ42909)

Need only one kit of 2 silentblocs per vehicle.

Silentbloc rubber/metal suspension arms on left or right upper front axle for BMW 5 series E39:

Sedan :
- 520i 2.0l 150hp phase 1 from 03/1995 to 07/1998 (engine code M52B20)
- 520i 2.0l 150hp phase 1 and 2 from 08/1998 to 11/2002 (engine code M52B20TU)
- 520i 2.2l 170hp phase 2 from 03/2000 to 07/2003 (engine code M54B22)
- 523i 170hp phase 1 from 02/1995 to 07/1998 (engine code M52B25)
- 523i 170hp phase 1 from 08/1998 to 08/2000 (engine code M52B25TU)
- 525i 192hp phase 1 and 2 from 11/1999 to 07/2003 (engine code M54B25)
- 528i 193hp phase 1 from 02/1995 to 07/1998 (engine code M52B28)
- 528i 193hp phase 1 from 08/1998 to 08/2000 (engine code M52B28TU)
- 530i 231hp phase 2 from 03/2000 to 07/2003 (engine code M54B30)
- 520d 4cyl 136hp phase 1 and 2 from 06/1999 to 07/2003 (engine code M47D20)
- 525d 163hp phase 1 and 2 from 06/1999 to 07/2003 (engine code M57D25)
- 525td 115hp phase 1 from 10/1996 to 02/2000 (engine code M51D25)
- 525tds 143hp phase 1 from 04/1995 to 03/2000 (engine code M51D25)
- 530d 184hp phase 1 and 2 from 12/1997 to 07/2003 (engine code M57D30)

Touring :
- 520i 2.0l 150hp phase 1 from 09/1996 to 07/1998 (engine code M52B20)
- 520i 2.0l 150hp phase 1 and 2 from 08/1998 to 07/2001 (engine code M52B20TU)
- 520i 2.2l 170hp phase 2 from 04/2000 to 12/2003 (engine code M54B20)
- 523i 170hp phase 1 from 09/1996 to 07/1998 (engine code M52B25)
- 523i 170hp phase 1 from 08/1998 to 08/2000 (engine code M52B25TU)
- 525i 192hp phase 1 and 2 from 11/1999 to 12/2003 (engine code M54B25)
- 528i 193hp phase 1 from 05/1996 to 07/1998 (engine code M52B28)
- 528i 193hp phase 1 from 08/1998 to 08/2000 (engine code M52B28TU)
- 530i 231hp phase 1 and 2 from 11/1999 to 12/2003 (engine code M54B30)
- 520d 4 cylinders 136hp phase 1 and 2 from 06/1999 to 09/2003 (engine code M47D20)
- 525d 163hp phase 1 and 2 from 06/1999 to 12/2003 (engine code M57D25)
- 525tds 143hp phase 1 from 05/1996 to 02/2000 (engine code M51D25)
- 530d 184hp phase 1 and 2 from 02/1998 to 12/2003 (engine code M57D30)

Length metal part: 60 mm
Overall length: 68 mm
Inside diameter: 12 mm
Total diameter: 58 mm

This product is sold individually.
Need 2 quantities per vehicle.

ATTENTION: This silentbloc is not suitable for the rear wishbone or for 535i, 540i and M5 versions!

These reinforced models located on the rear part of the front suspension arms (see number 1 on the diagram) offer a better guidance in support as well as an increased longevity compared to an original version

For Roadster (E85) and Coupé (E86):
- All models with 60mm diameter (except Z4 M)
Check your diameter because there is a 66mm assembly

These reinforced models located on the rear part of the rear suspension arms (see number 3 on the diagram) offer a better guidance in support as well as an increased longevity compared to an original version

For Roadster (E85) and Coupé (E86):

These reinforced models located on the rear axle sway bar link rods (see No. 16 on the diagram) offer better guidance under pressure as well as greater durability compared with the original part

For E28:
- All models

For E34 Saloon:
- 518 i M40/M43
- 520 i M20/M50
- 525 i M20/M50

For E34 Touring:
- 518 g/i M40/M43
- 520 i
- 525 i

For Coupé & Cabriolet:
- M3 S54