Silent blocks

Suitable for all E46 models except M3

Polyurethane drive axle bushes to replace the original rubber for better rigidity and durability

Suitable for all E46 except M3

518i with M40 engine 10/89->09/91
525i/iX M20 and M50
530i M30 and M60
535i and M5

Sold individually

For all E34 Saloon and Touring models (including 525ix and M5)

For E39 Sedan and Touring

Need 2 for one axle

Suitable for all Saloon and Touring models
(including M5)

For BMW 5 Series E39 all models including M5, except Touring

4 parts required to equip a rear axle.

For BMW 5 Series E39 Touring

For E39:
- Touring, all models
- 530 d 184hp and 193hp up to ->03/99 with manual gearbox

For X5 E53:
- All models

These reinforced models located on the rear axle sway bar link rods (see No. 16 on the diagram) offer better guidance under pressure as well as greater durability compared with the original part

For E28:
- All models

For E34 Saloon:
- 518 i M40/M43
- 520 i M20/M50
- 525 i M20/M50

For E34 Touring:
- 518 g/i M40/M43
- 520 i
- 525 i

For Coupé & Cabriolet:
- M3 S54

Silentbloc rubber/metal suspension arms on left or right upper front axle for BMW 5 series E39:

Sedan :
- 520i 2.0l 150hp phase 1 from 03/1995 to 07/1998 (engine code M52B20)
- 520i 2.0l 150hp phase 1 and 2 from 08/1998 to 11/2002 (engine code M52B20TU)
- 520i 2.2l 170hp phase 2 from 03/2000 to 07/2003 (engine code M54B22)
- 523i 170hp phase 1 from 02/1995 to 07/1998 (engine code M52B25)
- 523i 170hp phase 1 from 08/1998 to 08/2000 (engine code M52B25TU)
- 525i 192hp phase 1 and 2 from 11/1999 to 07/2003 (engine code M54B25)
- 528i 193hp phase 1 from 02/1995 to 07/1998 (engine code M52B28)
- 528i 193hp phase 1 from 08/1998 to 08/2000 (engine code M52B28TU)
- 530i 231hp phase 2 from 03/2000 to 07/2003 (engine code M54B30)
- 520d 4cyl 136hp phase 1 and 2 from 06/1999 to 07/2003 (engine code M47D20)
- 525d 163hp phase 1 and 2 from 06/1999 to 07/2003 (engine code M57D25)
- 525td 115hp phase 1 from 10/1996 to 02/2000 (engine code M51D25)
- 525tds 143hp phase 1 from 04/1995 to 03/2000 (engine code M51D25)
- 530d 184hp phase 1 and 2 from 12/1997 to 07/2003 (engine code M57D30)

Touring :
- 520i 2.0l 150hp phase 1 from 09/1996 to 07/1998 (engine code M52B20)
- 520i 2.0l 150hp phase 1 and 2 from 08/1998 to 07/2001 (engine code M52B20TU)
- 520i 2.2l 170hp phase 2 from 04/2000 to 12/2003 (engine code M54B20)
- 523i 170hp phase 1 from 09/1996 to 07/1998 (engine code M52B25)
- 523i 170hp phase 1 from 08/1998 to 08/2000 (engine code M52B25TU)
- 525i 192hp phase 1 and 2 from 11/1999 to 12/2003 (engine code M54B25)
- 528i 193hp phase 1 from 05/1996 to 07/1998 (engine code M52B28)
- 528i 193hp phase 1 from 08/1998 to 08/2000 (engine code M52B28TU)
- 530i 231hp phase 1 and 2 from 11/1999 to 12/2003 (engine code M54B30)
- 520d 4 cylinders 136hp phase 1 and 2 from 06/1999 to 09/2003 (engine code M47D20)
- 525d 163hp phase 1 and 2 from 06/1999 to 12/2003 (engine code M57D25)
- 525tds 143hp phase 1 from 05/1996 to 02/2000 (engine code M51D25)
- 530d 184hp phase 1 and 2 from 02/1998 to 12/2003 (engine code M57D30)

Length metal part: 60 mm
Overall length: 68 mm
Inside diameter: 12 mm
Total diameter: 58 mm

This product is sold individually.
Need 2 quantities per vehicle.

ATTENTION: This silentbloc is not suitable for the rear wishbone or for 535i, 540i and M5 versions!

For Golf 4 and Bora, all models including R32 and 4Motion

Polyurethane provides better engine stability during acceleration and deceleration.
These bushes are to be installed in place of the original bushes

These are reinforced engine mount bushings with adjustable rigidity via adjusting pins that enable you to modify the rigidity depending on your use (road or track). Ideal to avoid engine movement during hard braking or fast acceleration,

For E36 Saloon, Touring, Coupé & Compact
- 320 i
- 323 i
- 325 i
- 328 i
- M3
(not suitable for Compact or the diesel engine version)

Silentbloc caoutchouc de support de train arrière

Compatible pour Volkswagen Golf 1 Berline, Cabriolet, Jetta 1 et Scirocco

Besoin de 2 pièces par véhicule.

Original Volkswagen Classic Parts

FORST rear stabilizer bar outer silencer for Volkswagen Golf 1
For VW Golf 1 Sedan and Cabriolet all models with rear stabilizer bar diameter 20.5mm
FORST original quality

Silentblocrubber left or right on torsion bar for VW Combi Bay Window all models from 1968 to 1979.
Indispensable part for good handling and comfort driving, a good condition torsion bar silentblock preserves your quality and precision driving.
Need 4 for a complete rear end.
Sold by the unit.