Silent blocks

Notched rubber support
Original part number 311 511 246
Mounted on rear axle with trumpets or universal joints:
- left-hand inside, all models since 08/1959->.
(since chassis N° 2-528 668->)
- outside right from 08/1959 to ->08/1968
(chassis N° 2-528 668 ->118 1016 100)

For VW Beetle

FEBI upper control arm dampers for Bmw 7 Series E38 :

- Compatible with all Bmw 7 Series E38 versions from 07/1993 to 07/2001 including 750i v12.

These rubber pressure bar mounts are sold by 2.

Outer left or right-hand silentbloc on link
for anti-roll bar diameter: 23 mm
2 required per vehicle, sold per unit.

For Transporter T25/T3, 05/1979 ->12/1985
up to chassis No. ->24-G-055 689.

For VW Transporter T6

Position : behind the wishbone
Sold individually (1 part per wishbone)

OE ref.: 7H0 407 182 A / 7H0 407 182

FORST rear stabilizer bar outer silencer for Volkswagen Golf 1
For VW Golf 1 Sedan and Cabriolet all models with rear stabilizer bar diameter 20.5mm
FORST original quality

Left front silencer on rear axle for BMW X3 E83 and LCI :

BMW X3 E83 :

- 2.0i 4cyl 150hp from 05/2003 to 07/2006 (engine code N46B20)
- 2.5i 6cyl 192hp from 02/2003 to 07/2006 (engine code M54B25)
- 3.0i 6cyl 231hp from 01/2003 to 07/2006 (engine code M54B30)
- 2.0d 4cyl 150hp from 05/2003 to 07/2006 (engine code M47D20TU)
- 3.0d 6cyl 204hp from 01/2003 to 08/2005 (engine code M57D30TU)
- 3.0d 6cyl 218hp from 03/2005 to 07/2006 (engine code M57D30TU)

BMW X3 E83 LCI :

- 2.0i 4cyl 150hp from 03/2006 to 06/2008 (engine code N46B20)
- xDrive20i 4cyl 150hp from 07/2008 to 08/2010 (engine code N46B20)
- 2.5si 6cyl 218hp from 03/2006 to 06/2008 (engine code N52B25)
- xDrive25i 6cyl 218hp from 07/2008 to 08/2010 (engine code N52B25)
- 3.0si 6cyl 272hp from 02/2006 to 06/2008 (engine code N52B30)
- xDrive30i 6cyl 272hp from 07/2008 to 08/2010 (engine code N52B30)
- xDrive18d 4cyl 2.0L 143hp from 04/2009 to 08/2010 (engine code N47D20)
- 2.0d 4cyl 150hp from 03/2006 to 08/2007 (engine code M47D20TU)
- 2.0d 4cyl 177hp from 03/2007 to 06/2008 (engine code N47D20)
- xDrive20d 4cyl 177hp from 07/2008 to 08/2010 (engine code N47D20)
- 3.0d 6cyl 218hp from 03/2006 to 06/2008 (engine code M57D30TU)
- xDrive30d 6cyl 218hp from 07/2008 to 08/2010 (engine code M57D30TU)
- 3.0sd 6cyl 286hp from 03/2006 to 06/2008 (engine code M57D30TU2TOP) --> bi-turbo
- xDrive35d 6cyl 3.0L 286hp from 07/2008 to 08/2010 (engine code M57D30TU2TOP) --> twin-turbo 3.0d engine

Sold individually

Silentblock with 72 mm outer diameter.
Sold individually, 2 required for the rear axle

Compatible with Volkswagen Polo type 9N1 and 9N3

Front suspension cylindrical silent-block with arm suspension ring

Cortecorear suspension bumper for Peugeot 406 all models
Silentblock located on the rear suspension crossmember
High-quality part
Can be mounted on left or right side

N°11 Rear stabilizer bar link bushes set POWERFLEX HERITAGE, for Porsche 924 :

- 924 2.0 - 125 hp (XJ/XK) from 1976 to 1985
- 924 2.5 S - 150 hp (M44.07/M44.08) from to 1987
- 924 2.5 S - 160 hp (M44.09/M44.10) of 1988
- 924 2.0 Turbo - 170 hp (M31.01) from 1979 to 1980
- 924 2.0 Turbo - 177 hp (M31.03) from 1981 to 1985
- 924 2.0 Carrera GT - 210 hp (M31.50) of 1981

The POWERFLEX Heritage range offers silent blocks of a higher quality than the original ones. Softer than the purple Roadseries silentblocks, they preserve comfort, while benefiting from precise driving, without vibration phenomena. Their dark gray color is perfect for owners who want to keep the original look.

This set contains all the silentblocs necessary for the renovation of the 2 sway bar links.

Silentbloc for anti-roll bar
Diameter:27 mm
Left or right-hand side, sold per unit.

For VW TransporterT4 type 70/7D
09/1990 ->06/2003
Including Syncro version (4 x 4).

Set of 2 heavy duty silentblocks located on the inside of the Mazda RX-8 lower front suspension arm

- Position 6 on the diagram (see photo)

Complete kit for left and right arms
Fits all Mazda RX-8 models

POWERFLEX silentblocks have the double advantage of being very easy to fit and being unbeatably reliable and high-performance. Harder than the original rubber, they give you even more precision and stability when the chassis is under stress. They have a longer life span and fitting them with half-silentblocks is much easier.

Upper front suspension travel stops
Sold in pairs for both sides.

For Bay Window Combi, 08/1967 ->07/1979
All models

2 front anti-roll bar silentblocs for:

- 993 with M030 option from 1994 to 1998
- 993 Turbo

Specific model for V6 3.2 engines for Golf 4 R32 and New Beetle RSi
(outer diameter greater than for the standard version)

Front lower control arm silencer for Renault Supercinq

For Renault Super5 :
- Supercinq C, TC from 06/1985 to 06/1987 - Cléon-Fonte 956cm3 42hp (C1C-700)
- Supercinq L, TL, GL, GTL from 09/1984 to 05/1985 - Cléon-Fonte 1108cm3 47hp (C1E-750)
- Supercinq GTL from 09/1984 to 06/1987 - Cléon-Fonte 1397cm3 60hp (C1J-768)
- Supercinq Automatic from 06/1985 to 06/1987 - Cléon-Fonte 1397cm3 68hp (C2J-781)
- Supercinq GTS, TS, TSE from 06/1985 to 06/1987 - Cléon-Fonte 1397cm3 72hp (C2J-780)
- Supercinq GT Turbo from 03/1985 to 06/1987 - Cléon-Fonte 1397cm3 115hp (C1J-782)
- Supercinq TD, GTD from 06/1985 to 06/1987 - F engine 1595cm3 55hp (F8M-720)
- Supercinq Five, SL, TL from 07/1987 to 06/1992 - Cléon-Fonte 1108cm3 47hp (C1E-400)
- Supercinq SR, TR, GTR from 07/1987 to 06/1990 - Cléon-Fonte 1237cm3 55hp (C1G-720)
- Supercinq Five, Saga, Bye Bye from 07/1992 to 12/1996 - Cléon-Fonte 1390cm3 60hp (C3J-760)
- Supercinq GTS from 07/1987 to 06/1990 - Cléon-Fonte 1397cm3 68hp (C2J-700)
- Supercinq Automatic, Baccara Automatic from 07/1987 to 12/1991 - Cléon-Fonte 1397cm3 68hp (C2J-781)
- Supercinq GTX, Baccara from 07/1987 to 12/1990 - F engine 1721cm3 90hp (F2N-740)
- Supercinq GT Turbo from 07/1987 to 12/1991 - Cléon-Fonte 1397cm3 120hp (C1J-788)
- Supercinq Five D, SD, TD, GTD from 07/1987 to 12/1989 - Engine F 1595cm3 55hp (F8M-400)

This OE-quality front lower wishbone silentblock can be fitted on either left or right side.

MEYLE HD reinforced front right bumper on rear axle for BMW X3 E83 and LCI :

BMW X3 E83 :

- 2.0i 4cyl 150hp from 05/2003 to 07/2006 (engine code N46B20)
- 2.5i 6cyl 192hp from 02/2003 to 07/2006 (engine code M54B25)
- 3.0i 6cyl 231hp from 01/2003 to 07/2006 (engine code M54B30)
- 2.0d 4cyl 150hp from 05/2003 to 07/2006 (engine code M47D20TU)
- 3.0d 6cyl 204hp from 01/2003 to 08/2005 (engine code M57D30TU)
- 3.0d 6cyl 218hp from 03/2005 to 07/2006 (engine code M57D30TU)

BMW X3 E83 LCI :

- 2.0i 4cyl 150hp from 03/2006 to 06/2008 (engine code N46B20)
- xDrive20i 4cyl 150hp from 07/2008 to 08/2010 (engine code N46B20)
- 2.5si 6cyl 218hp from 03/2006 to 06/2008 (engine code N52B25)
- xDrive25i 6cyl 218hp from 07/2008 to 08/2010 (engine code N52B25)
- 3.0si 6cyl 272hp from 02/2006 to 06/2008 (engine code N52B30)
- xDrive30i 6cyl 272hp from 07/2008 to 08/2010 (engine code N52B30)
- xDrive18d 4cyl 2.0L 143hp from 04/2009 to 08/2010 (engine code N47D20)
- 2.0d 4cyl 150hp from 03/2006 to 08/2007 (engine code M47D20TU)
- 2.0d 4cyl 177hp from 03/2007 to 06/2008 (engine code N47D20)
- xDrive20d 4cyl 177hp from 07/2008 to 08/2010 (engine code N47D20)
- 3.0d 6cyl 218hp from 03/2006 to 06/2008 (engine code M57D30TU)
- xDrive30d 6cyl 218hp from 07/2008 to 08/2010 (engine code M57D30TU)
- 3.0sd 6cyl 286hp from 03/2006 to 06/2008 (engine code M57D30TU2TOP) --> bi-turbo
- xDrive35d 6cyl 3.0L 286hp from 07/2008 to 08/2010 (engine code M57D30TU2TOP) --> twin-turbo 3.0d engine

This part offers optimized quality compared to the original, with design flaws corrected for longer life and greater operating efficiency.

Sold individually

For Coupé & Cabriolet:
- M3 S54

2 required per suspension arm