Stabiliser bar

For Beetle 1200/1300/1500 07/65 ->, front axle with ball joints
For original height front axle (not dropped)
Reinforced anti-roll bar, large diameter
Supplied with urethane reinforced silentblocs, but without clamps

Stabilizer bar bracket to weld on longitudinal reinforcement for Porsche 911 type G from 1974 to 1977 :
- 911 2.7 from 1974 to 1977- 911 S 2.7 from 1974 to 1977- 911 Carrera 2.7 from 1974 to 1976- 911 Carrera 3.0 from 1976 to 1977
Part in black storage paint, to be primed after welding and painted according to the rules of the art of bodywork restoration.

For Roadster & Coupé:
- Z3 M S50 & S54

Large anti-roll bar, prevents roll during cornering, helps the car to corner flat, improves the road holding and the accuracy of trajectory. EMPI USA.

For Beetle, Karmann-Ghia, Buggy ..
with rear axle with flared tubes.

For Corrado all models except VR6

Diameter of front bar: 22 mm
Diameter of rear bar: 25 mm

The anti-roll bars contribute to improving the handling of your vehicle.
They can be fitted with both original suspension and a more sporty suspension (short springs, threaded kits)

Outside silent block cover support on the link arm of the anti-roll bar of the rear axle with housing. Left or right side, sold individually.

For VW Beetle & Karmann-Ghia, type14
Years: since 08/1966->
Models: 1200, 1300, 1500.
Chassis: from No. 117 000 001->

Located on the rear anti-roll bar, for standard chassis,

For E81 until 12/07:
- 118 d N47
- 118 i N43 & N46N
- 120 d N47
- 120 i N43 & N46N
- 123 d N47S
- 130 i N52N

For E82:
- 135 i N55

For E87:
- 118 d M47N2
- 118 i N46 from 11/04->
- 120 d M47N2
- 120 i N46
- 130 i N52

For E87 LCI:
- 118 d N47 until 10/09
- 118 i N43 & N46N until 10/09
- 120 d N47 until 10/09
- 120 i N43 until 10/09
- 123 d N47S
- 130 i N52N

For E88:
- 118 d N47
- 118 i N43 & N46N
- 120 d N47
- 120 i N43 & N46N until 06/09
- 123 d N47S
- 125 i N52N
- 135 i N54 & N55

Located on the rear anti-roll bar,

For E81, E82, E87 & E88:
All models with 12 mm sway bar

22.5mm front stabilizer bar silencer for MINI II R50 Sedan and R52 Convertible :

R50 Sedan :
- Cooper 1.6L 116hp from 09/2000 to 11/2006 (engine code W10B16) -> standard suspension
- One 1.6L 90hp from 09/2000 to 11/2006 (engine code W10B16) -> sport suspension plus
- One D 1.4L 75hp from 06/2002 to 06/2004 (engine code W171ND-TV) -> sport suspension plus
- One D 1.4L 88hp from 07/2004 to 07/2006 (engine code W171ND-TV) -> sport suspension plus

R52 Cabriolet :
- Cooper 1.6L 116hp from 11/2002 to 07/2008 (engine code W10B16) -> standard suspension
- One 1.6L 90hp from 01/2003 to 07/2008 (engine code W10B16) -> standard suspension

Quantity required per vehicle: 2

This product is sold individually.

For Beetle 1303 08/73->
Large, reinforced CUP type anti-roll bar
Supplied with special urethane silentblocs

Located on the rear anti-roll bar, for standard chassis,

For E90 LCI (Standard chassis):
- 325 xi N53

For E92 LCI (Standard chassis):
- 320 xd N47N
- 325 xi N52N & N53
- 330 xd N57
- 330 xi N53
- 335 xi N55

For E93 LCI (M Sport chassis):
- 318 i N43 up to ->06/10
- 320 d N47N
- 320 i N43 & N46N
- 323 i N52N
- 325 d N57
- 325 i N52N & N53
- 328 i N51
- 330 d N57
- 330 i N52N & N53
- 335 i N55

These reinforced models located in the centre of the rear axle sway bar (see No. 4 on the diagram) offer better guidance under pressure as well as greater durability compared with the original part

For Saloon, Touring, Coupé & Convertible:
- All models with 18 mm sway bar

This SUPERPRO 24mm front stabilizer bar fits all MX5 ND :

- MX5 ND ST 1.5l and 2.0l from 05/2015 until today ;
- MX5 ND RF 1.5l and 2.0l from 12/2016 to today.

The stabilizer bar is an essential part of your car. It is responsible for limiting the vehicle's lateral sway during cornering, also known as roll.
As the diameter of this bar increases, its rigidity increases and its ability to twist decreases. This leads directly to a firmer suspension feel andmore precise steering.

The SUPERPRO 24mm front stabilizer bar will give your MX5 a sportier ride. The two silentblocs supplied with the bar are also stiffer than the original ones, giving your chassis added rigidity. Their polyurethane material guarantees excellent longevity.

These reinforced models located on the stabilizer bar of the front axle (see number 3 on the diagram) offer a better guidance in support as well as an increased longevity compared to an original version

For E81, E82, E87, E87 LCI & E88:
- All models with 26.5mm sway bar

Left front stabilizer bar bracket for Mercedes SLK

For Mercedes SLK R170 all models :
- SLK 200 (170.435) from 09/1996 to 01/2000
- SLK 200 Kompressor (170.445) from 09/1996 to 01/2000
- SLK 200 Kompressor (170.444) from 02/2000 to 12/2004
- SLK 230 Kompressor (170.447) from 09/1996 to 01/2000
- SLK 230 Kompressor (170.449) from 02/2000 to 12/2004
- SLK 320 (170.465) from 02/2000 to 12/2004
- SLK 32 AMG (170.466) from 01/2001 to 12/2004

Left side (driver)
Original MEYLE quality

Located on the rear anti-roll bar, for standard chassis,

For E90 & E91:
- 316 i N43, N45 & N45N (E90 only)
- 318 d M47N2 & N47 (E90 only)
- 318 i N43, N46 & N46N
- 320 i N43, N46 & N46N

For E92:
- 316 i N43
- 320 i N43 & N46N

(Not suitable for M Sport chassis or sports suspensions)

For Roadster with M sport chassis:
- 1.8 M43
- 1.9 M43 & M44

For Saloon (with Sport suspension only):
- 316i N40, N42, N45 & N46
- 316i M43 (1.6 & 1.9)
- 318i M43, N42 & N46
- 318d M47 & M47N
- 320d M47 up to 09/01

For Touring:
- 316i N42 & N46
- 318i M43 & N42
- 318d M47 & M47N
- 320d M47 & M47N

For Coupé:
- 316Ci N40, M43 & N45
- 318Ci N42, M43 & N46

For Cabriolet:
- 318Ci N42 & N46
- 320Cd M47N

Located on the rear anti-roll bar, for standard chassis,

For E90:
- 325 xi N52 & N52N
- 330 xd M57N2
- 330 xi N52
- 335 xi N54

For E92:
- 320 xd N47
- 325 xi N52N & N53
- 330 xd M57N2 & N57
- 330 xi N52N & N53
- 335 xi N54

(Not suitable for M Sport chassis or sports suspensions)

For Golf 3 09/91 -> 10/97 (except estate and Syncro):
- 1.4, 1.6, 1.8 and 2.0 petrol engines (except 2.0 ABFand 2.8 AAA)
- 1.9 D, 1.9 TD, 1.9 GTD, 1.9 TDI 90hp Diesel engines

For Golf 3 cabriolet 09/93 -> 98:
- 1.6, 1.8, 2.0, 1.9TDI

Diameter of front bar: 22 mm
Diameter of rear bar: 25 mm

The anti-roll bars contribute to improving the handling of your vehicle.
They can be fitted with both original suspension and a more sporty suspension (short springs, threaded kits)