Stabiliser bar

These reinforced models located on the front axle sway bar link rods (see No. 3 on the diagram) offer better guidance under pressure as well as greater durability compared with the original part

For E30:
- All models except M3 & 325 iX (4x4)

For E36 from 10/91->:
- 316 i, 318 i (M40, M43)
- 318 tds
- 320 i, 323 i, 328 i (M50, M52)
-325 td/tds (M51)

These reinforced models located on the front axle sway bar (see No. 2 on the diagram) offer better guidance under pressure as well as greater durability compared with the original part

For E46:
- All models with 24 mm sway bar
(measure your model before ordering)

These reinforced models located in the centre of the rear axle sway bar (see No. 5 on the diagram) offer better guidance under pressure as well as greater durability compared with the original part

For Saloon, Touring, Coupé & Convertible:
- All models with 18 mm sway bar
(Not for Compact)

These reinforced models located on the stabilizer bar of the front axle (see number 2 on the diagram) offer a better guidance in support as well as an increased longevity compared to an original version

For Roadster (E85) & Coupé (E86) with standard chassis:
- All models (except Z4 M)

These reinforced models located in the centre of the rear stabilizer bar (see number 4 on the diagram) offer a better guidance in support as well as an increased longevity compared to an original version

For Roadster (E85) & Coupé (E86) with standard chassis:
- All models (except Z4 M)

These reinforced models located in the centre of the rear axle sway bar (see No. 4 on the diagram) offer better guidance under pressure as well as greater durability compared with the original part

For Saloon, Touring, Coupé & Convertible:
- All models with 18 mm sway bar

Polyurethane silent-blocks for 29mm diameter front stabilizer bar

Polyurethane: for greater front-end rigidity and responsiveness.

These reinforced models located on the front axle sway bar (see No. 2 on the diagram) offer better guidance under pressure as well as greater durability compared with the original part

For Saloon:
- 320 i M52 up to ->06/00
- 323 i M52
-328 i up to ->12/98

These reinforced models offer better guidance of the rear axle under pressure as well as greater durability compared with the original part,
Position 14 on the diagram,

For E60:
- 520 d M47N2 (standard chassis up to 03/06, sports suspension from 03/06->)
- 520 i M54 (standard chassis up to 03/06)
- 523 i N52 (standard chassis up to 03/06, sports suspension from 03/06->)
- 525 i M54 (standard chassis up to 03/06)
- 525 i N52 (standard chassis up to 03/06, sports suspension from 03/06->)
- 530 i M54 (standard chassis up to 03/06)
- 530 i N52 (standard chassis up to 03/06, sports suspension from 03/06->)

For E60 LCI:
- 520 d M47N2 & N47 with sports suspension from 03/06->
- 520 i N46N & N43 with sports suspension from 03/06->
- 523 i N52N & N53 with sports suspension from 03/06->
- 525 i N52N & N53 with sports suspension from 03/06->
- 530 i N52N & N53 with sports suspension from 03/06->

For E36:
- 318 Tds, 318 i with M40 engine->06/92
- 320 i M50 and M52 engines 06/92->
- 325 i / Td / Tds 06/92->
- 328 i 06/92->

Suitable for:
- E34 with conventional suspension only (not sport)
- E36 Saloon and CoupéM3 3l2

MEYLE Original 19mmsway bar bearing For Peugeot 206 S16 and 206 XS
Fits left or right side
Please check the diameter of your stabilizer bar before ordering.
Assignments :- 206 XS - 1.6 1587cm3 90hp (TU5JP) RFR phase 1 from 1999 to 2000- 206 XS - 1.6 16V 1587cm3 110hp (TU5JP4) RFN phase 1 from 2000 to 2003- 206 XS - 1.6 16V 1587cm3 110hp (TU5JP4) RFN phase 2 from 2003 to 2007- 206 S16 - 1.6 16V 1587cm3 110hp (TU5JP4) RFN phase 2 from 08/2004 to 07/2007

This Front Stabilizer Bar Flange for Renault 4 (10/1961-12/1993) is a quality reproduction.

This Stab Bar Silent Block Flange for R4 is made of dichromated steel ensuring superior corrosion resistance to the original flange.

Compatible models:

- R4 type R1120 : 10/1961 to 09/1971
- R4 super type R1122 : 03/1962 to 09/1962
- R4 type R1123 : 12/1963 to 05/1986
- R4 super type R1124 : 09/1962 to 12/1963
- R4 Export/L/TL type R1126 : 09/1971 to 07/1982
- R4 Safari type R1129: 09/1975 to 07/1978
- R4 GTL type R1128: 10/1977 to 12/1993
- R4 Savane type R112C: 09/1986 to 12/1992

- R4 4CV van R2102: 10/1961 to 03/1966
- R4 4CV van type R2104: 02/1965 to 03/1966
- R4 4CV van R2105: 03/1966 to 09/1971
- R4 5CV van type R2106: 03/1966 to 05/1986
- R4 Elevated van type R2108: 10/1972 to 07/1975
- R4 4CV F4 van type R2109: 09/1971 to 07/1982
- R4 Van F4 type R2391: 09/1972 to 05/1986
- R4 Van 4CV glazed F4 type R2392: 09/1973 to 07/1982
- R4 F6 extended van type R2370: 05/1975 to 11/1985
- R4 F6 Pick up type 3C2370: 07/1978 to 11/1985
- R4 R2430 glazed long van: 05/1975 to 07/1978
- R4 F4 type R210B: 09/1981 to 05/1990
- R4 F4 station wagon type 239B: 09/1981 to 05/1990

This stab bar bracket for Renault 4 (10/1961-12/1993) - 16mm is a quality reproduction.

This silent stab bar block for R4 is faithful to the original. Made in Europe it allows you to regain the original rigidity.

Compatible models:

- R4 type R1120 : 10/1961 to 09/1971
- R4 super type R1122 : 03/1962 to 09/1962
- R4 type R1123 : 12/1963 to 05/1986
- R4 super type R1124 : 09/1962 to 12/1963
- R4 Export/L/TL type R1126 : 09/1971 to 07/1982
- R4 Safari type R1129: 09/1975 to 07/1978
- R4 GTL type R1128: 10/1977 to 12/1993
- R4 Savane type R112C: 09/1986 to 12/1992

- R4 4CV van R2102: 10/1961 to 03/1966
- R4 4CV van type R2104: 02/1965 to 03/1966
- R4 4CV van R2105: 03/1966 to 09/1971
- R4 5CV van type R2106: 03/1966 to 05/1986
- R4 Elevated van type R2108: 10/1972 to 07/1975
- R4 4CV F4 van type R2109: 09/1971 to 07/1982
- R4 Van F4 type R2391: 09/1972 to 05/1986
- R4 Van 4CV glazed F4 type R2392: 09/1973 to 07/1982
- R4 F6 extended van type R2370: 05/1975 to 11/1985
- R4 F6 Pick up type 3C2370: 07/1978 to 11/1985
- R4 R2430 glazed long van: 05/1975 to 07/1978
- R4 F4 type R210B: 09/1981 to 05/1990
- R4 F4 station wagon type 239B: 09/1981 to 05/1990

Stabilizer barbearing for Peugeot 205
Stabilizer bar diameter: 20mm
For all models except GTI, Rallye and Dturbo Turbo Diesel
Assignments :- 1.0 GL, GE, XL, XE, Junior 954cm3 45hp (XV8) from 02/1983 to 07/1987- 1.0 XL, GL, Junior 954cm3 45hp (TU9) from 08/1987 to 07/1992- 1.0 XE, XR, Junior catalyzed 954cm3 50hp (TU9M/Z) from 08/1992 to 07/1995- 1.1 GL, GR, XL, XR 1124cm3 50hp (XW7) from 02/1983 to 07/1987- 1.1 GL, XL, GR, XR 1124cm3 55hp (TU1) from 08/1987 to 07/1992- 1.1 XE, GE, XL, GL, XR, GR catalysed 1124cm3 60hp (TU1M/Z) from 08/1992 to 07/1995- 1.4 GR, SR, XR 1360cm3 60hp (XY7) from 02/1983 to 07/1987- 1.4 GT, XT, XS 1360cm3 80hp (XY8) from 02/1983 to 07/1987- 1.4 GR, SR, XR 1360cm3 65hp (TU3) from 08/1987 to 07/1988- 1.4 GR, SR, XR 1360cm3 69hp (TU3A) from 08/1988 to 07/1990- 1.4 GR, SR, XR 1360cm3 75hp (TU3F2) from 08/1990 to 07/1992- 1.4 GR, SR, XR Catalyzed 1360cm3 75hp (TU3M/Z) from 08/1992 to 12/1998- 1.4 GT, XS 1360cm3 85hp (TU3S) from 08/1987 to 07/1992- 1.6 GT, XS 1580cm3 89hp[lm1] (XU5M) from to 07/1992- 1.6 GT, XS 1580cm3 89hp (XU5M/Z) from 08/1992 to 07/1993- 1.6 Automatic 1580cm3 80hp (XU51C) from 08/1985 to 07/1987- 1.6 Automatic 1580cm3 80hp (XU51C) from 08/1987 to 07/1993- 1.6 Automatic catalysed 1580cm3 89hp (XU5M/Z) from 08/1993 to 08/1994- 1.8 GLD, GRD, SRD 1769cm3 60hp (XUD7) from 09/1983 to 07/1987- 1.8 XLD, XRD, XTD 1769cm3 60hp (XUD7) from 08/1984 to 07/1987- 1.8 GLD, GRD, GTD, XLD, XRD, XTD 1769cm3 60hp (XUD7) from 08/1987 to 12/1998


Peugeot 205 Cabriolet :
- 1.1 CJ 1124cm3 55hp (TU1) from 08/1987 to 07/1992- 1.1 CJ Catalysée 1124cm3 60hp (TU1M/Z) from 08/1992 to 07/1995- 1.4 CT 1360cm3 80hp (XY8) from 07/1986 to 07/1987- 1.4 CJ 1360cm3 65hp (TU3) from 08/1987 to 07/1988- 1.4 CJ 1360cm3 69hp (TU3A) from 08/1988 to 07/1990- 1.4 CJ 1360cm3 75hp (TU3F2) from 08/1990 to 07/1992- 1.4 Cabriolet 1360cm3 75hp (TU3M/Z) from 08/1992 to 07/1995

SSP rear stabilizer bar external retaining clip for Volkswagen Golf 1
For VW Golf 1 :- Sedan all models from 1975 to 1983- Cabriolet all models from 1979 to 1993
This metal retainer holds the rear stabilizer bar's external silentblock bracket to the rear axle.
Sold individuallyOriginal SSP quality

Stabilizer bar bracket to weld on longitudinal reinforcement for Porsche 911 type F from 1972 to 1973 :
- 911 2.4 T / E / S from 1972 to 1973- 911 2.7 Carrera RS from 1973
Part in black storage paint, to be primed after welding and painted according to the rules of the art of bodywork restoration.

Stabilizer bar bracket to weld on longitudinal reinforcement for Porsche 911 type G from 1974 to 1977 :
- 911 2.7 from 1974 to 1977- 911 S 2.7 from 1974 to 1977- 911 Carrera 2.7 from 1974 to 1976- 911 Carrera 3.0 from 1976 to 1977
Part in black storage paint, to be primed after welding and painted according to the rules of the art of bodywork restoration.

EMPI rear stabilizer bar complete with brackets, urethane silent-blocks and hardware for VW Combi Bay Window from 08/1967 to 07/1979.

Silentblock of rear stabilizer bar 17mm for MINI III R57,R57LCI Cabriolet and R59 Roadster with sport suspension:

R57 Cabriolet:
- Cooper 1.6L 120hp from 10/2007 to 06/2010 (engine code N12B16)
- Cooper S 1.6L 175hp from 11/2007 to 07/2010 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 08/2008 to 07/2010 (engine code N14B16)

R57LCI Convertible :
- Cooper 1.6L 122hp from 09/2009 to 06/2015 (engine code N16B16)
- Cooper S 1.6L 184hp from 06/2009 to 06/2015 (engine code N18B16)
- Cooper S JCW 1.6L 211hp from 01/2010 to 07/2012 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 01/2012 to 05/2015 (engine code N18B16)
- Cooper SD 2.0L 143hp from 06/2009 to 05/2015 (engine code N47C20)
- Cooper D 1.6L 112hp from 05/2009 to 05/2015 (engine code N47C16)
- Cooper D 2.0L 112hp from 11/2010 to 05/2015 (engine code N47C20)
- One 1.6L 98hp from 09/2009 to 06/2015 (engine code N16B16)

R59 Roadster:
- Cooper 1.6L 122hp from 01/2011 to 04/2015 (engine code N16B16)
- Cooper S 1.6L 184hp from 01/2011 to 04/2015 (engine code N18B16)
- Cooper S JCW 1.6L 211hp from 05/2011 to 06/2012 (engine code N14B16)
- Cooper S JCW 1.6L 211hp from 01/2012 to 04/2015 (engine code N18B16)
- Cooper SD 2.0L 143hp from 01/2011 to 04/2015 (engine code N47C20)

Quantity needed per vehicle: 2

This product is sold by the unit.