Stabiliser bar

These large-diameter urethane stabilizer bar silentblocks for Volkswagen Beetle are of superior quality.
Specific to 19mm diameter reinforced stab bars, Supplied in packs of 4, two narrow, in the center, and two long on the outside, they come with their stainless steel clamps.
Compatible models: - VW Beetle 1200, 1300, 1500 since 08/65->- VW type 3- VW Buggy/Bajawith ball-jointed front axle.

Stabilizer bar mounting kit right outer side for VOLKSWAGEN Combi Split Brazil (1957-1975)

Includes the sway bar with bushes and rods, reinforced MEYLE HD German quality, for 3- or 5-door Audi A3 (8P) including Sportback with equipment code PR-0AD.

Suitable for standard chassis :
- E36 except Compact and M3 from 1990 ->2000
- E34 for rear stabilizer bar

Rear anti-roll bar silencer for Mazda RX8

For RX8 SE all models until 10/2005 (chassis number 137249)

Inside diameter 15.2mm
2 required for the rear anti-roll bar

German quality

For Beetle 1200 ->07/65, front axle with spindles
For original height front axle (not dropped)
Reinforced anti-roll bar, large diameter
Supplied with urethane reinforced silentblocs, but without clamps

For Beetle 1200 ->07/65, front axle with spindles
For adjustable or lowered front axle
Reinforced anti-roll bar, large diameter
Supplied with urethane reinforced silentblocs, but without clamps

For Beetle 1200/1300/1500 07/65 ->, front axle with ball joints
For original height front axle (not dropped)
Reinforced anti-roll bar, large diameter
Supplied with urethane reinforced silentblocs, but without clamps

For Beetle 1200/1300/1500 08/65 ->, front axle with ball joints
For adjustable or lowered front axle
Reinforced anti-roll bar, large diameter
Supplied with urethane reinforced silentblocs, but without clamps

Large-diameter 19~20 mm "CUP" anti-roll bar.
Supplied with 2 urethane silentblocs (without collar) on stabilizer bar.
For front axle at original or lowered height.

For VW Beetle 1302 / 1303 and Cabriolet.
Years : ->07/1973
Chassis: -> N° 133 3200 000

Rear anti-roll trumpet stabilizer bar buffer block.
Left or right side, sold individually.
Original Volkswagen Classic Parts

For VW Beetle

Outside silent block cover support on the link arm of the anti-roll bar of the rear axle with housing. Left or right side, sold individually.

For VW Beetle & Karmann-Ghia, type14
Years: since 08/1966->
Models: 1200, 1300, 1500.
Chassis: from No. 117 000 001->

Inside silent block cover support on the link arm of the anti-roll bar of the rear axle with housing. Left or right side, sold individually.

For VW Beetle & Karmann-Ghia, type14
Years: since 08/1966->
Models: 1200, 1300, 1500.
Chassis: from No. 117 000 001->

27mm anti-roll bar supplied with the 2 silencers, contributes to improving the behaviour of your vehicle by increasing stability and drive precision (reduction of understeer)

For E46:
- All models

This stab bar has 2 fixing points on either side for the connecting rod, allowing you to adjust according to your configuration, to either 245 mm or 265 mm

For X5 E53 with sport chassis:
- 3.0 d M57 & M57N
- 3.0 i M54
- 4.4 i M62 & N62

For X5 E53 with standard or sport chassis:
- 4.6is M62
- 4.8is N62

For Roadster with Sport M chassis :
- 2.2 i M54
- 3.0 i M54

OE front sway bar clamps in stainless steel with screw closure. Quick and easy to install, these clamps are recommended for mounting original or large-diameter stabilizer bars, with original or urethane silentblocks.

For VW Beetle 1200, 1300, 1500
Buggy

Left-hand arm of compensation bar on rear axle withoscillating arms. Original Volkswagen Classic Parts.

For Beetle & Karmann-Ghia type 14, 08/1966->
Models: 1200, 1300, 1500.
since chassis N° 117 000 001->

Part to adjust left push-rod on the rear trumpet suspension anti-roll bar.
Original Volkswagen Classic Parts.

For VW Beetle & Karmann-Ghia Type 14
Years: from 08/1966->
Models: 1200, 1300, 1500.
Chassis: from no. 117 000 001->

Sway bar mounting bolt, M10x50
For VW Combi Bay Window
Original Volkswagen Classic Part