rack

Non power steering rack for VOLKSWAGEN T4 from 1990 to 1996 all versions without power steering.

Complete manual steering rack equipped with new bushes, track rods and steering heads for VOLKSWAGEN Transporter T25/T3, Multivan from 05/1979 to 07/1992, all models except Syncro version (4x4).

This SASIC silent block for PEUGEOT 404 and 504 - 30mm is true to original.It is used at the front in the rack and at the rear for the stabilizer bars on all Peugeot 404 and 504 models.

Rack alone for non-power steering with new silentblocs.
Model for left-hand drive.

For Transporter T25/T3, 05/1979 ->07/1992
All models except Syncro version (4 x 4).

Steering rack support screw for Volkswagen Golf 2 and Golf 3
For Golf 2 all models
For Golf 3 all models with non-power steering
Need 4 per vehicleGenuine Volkswagen part

Protective sheath for steering rack.Need 2, sold individually.Original Volkswagen Classic Parts.
For VW Transporter T25 / T3 from 05/1979 to 07/1992All models including Syncro version (4 x4).

Febi power steering rack repair kit for Bmw 3 Series :
- Compatible with all Bmw 3 Series E30 Sedan and Coupé versions from 12/1981 to 06/1986 with all engines except 4-wheel drive model type 325ix engine code m20b25.

Power steering rack silentblock for Golf 1 Cabriolet, right side (passenger)

This rubber silentblock is specific in diameter, to the power steering installed as original equipment on some Golf 1 Cabriolet.

Power steering rack silentblock for Golf 1 Cabriolet, left side (driver)

This rubber silentblock is specific in diameter, to the power steering installed as original equipment on some Golf 1 Cabriolet.

Topran steering rack seals for Bmw z1:
Bmw z1 E30 Roadster :
- 2.5i 6cyl 170hp from 07/1988 to 06/1991 (engine code m20b25)
This gasket kit will enable you to completely refurbish your hydraulic steering mechanism.

Febi steering rack gasket kit for Bmw z1:
Bmw z1 E30 Roadster :
- 2.5i 6cyl 170hp from 07/1988 to 06/1991 (engine code m20b25)
This high-quality gasket kit will enable you to completely refurbish your hydraulic steering mechanism.

Steering rack mounting bush for VOLKSWAGEN Transporter T4, Multivan from 09/1990 to 08/1992 up to chassis no. 70-P-004342.
Internal diameter: 8 mm
4 required, sold individually.

Steering rack without exchange (no deposit or return of old rack)

For Golf 1 saloon, cabriolet and Caddy ->93 except automatic,
from chassis 178 3058 450->

For Scirocco from chassis 538 2009 474-> except automatic

For left-hand drive vehicles only

Suitable for:
- Golf 2
- Corrado

Steering rack renovation kit,

For Saloon:
- 316 i M40 & M43
- 318 i M40 & M43
- 318 is M42 & M44
- 320 i M50 & M52
- 323 i M52
- 325 i M50
- 328 i M52
- M3 3.2L S50 

For Touring:
- 316 i M43
- 318 i M43
- 320 i M52 
- 323i 328i

For Coupé & Convertible:
- All models

For Compact:
- 316 i 1.6 & 1.9 M43
- 318 tds M41
- 318 ti M42 & M44
- 323 ti M52

This bolt is used to secure the steering rack socket to the steering bar fork.

On models from 1965 to 1968, bolts, socket and fork may be different. A "new" fitting appeared from 1967.

"The old fitting" part may be difficult to find. This Porsche original bolt, will allow you to fit your 911 or 912 with new steering bars and fork.

This bolt is suitable for:

-> Porsche 912:
- 912 1.6 from 1965 to 1969 with the new mounting
- 912 E 2.0, year 1976

-> Porsche 911:
- 911 2.0 from1965 to 1968 with the new mounting
- 911 2.0 T/L / E / S from 1967 to 1969 with the new mounting
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS , year 1973
- 911 2.7 from 1974 to 1977
- 911 2.7 S from 1974 to 1975
- 911 Carrera 2.7 from 1974 to 1976
- 911 Carrera 3.0 from 1976 to 1977
- 911 3.0SC from 1978 to 1983
- 911 Carrera 3.2 from 1984 to 1989

1 bolt per rod
Sold individually

Bolt used to secure the steering rack socket to the steering bar fork. Original Porsche part, can be fitted on the 914-4 and 914-6:

- 914-4 1.7 from 1970 to 1973
- 914-4 1.8 from 1974 to1976
- 914-4 2.0 from 1973 to 1976
- 914-6 2.0 from 1970 to 1972

1 bolt per rod
Sold individually

SilentBloc screwed to the steering gear output for Porsche 914-4 and 914-6 :

- 914-4 1.7 from 1970 to 1973
- 914-4 1.8 from 1974 to 1976
- 914-4 2.0 from 1973 to 1976
- 914-6 2.0 from 1970 to 1972

Suitable for the right or left side

This rack bellows for Renault 4 (09/1968- 09/1978) is faithful to the original.

This rack bellows for R4 is compatible with the second generation of round housing rack without return spring and clevis rods appeared on the 1969 vintage. The 13° caster angle then required major modifications to the front axle.

In 1979, the clevis links would give way to axial ball joints.

Compatible models:
- R4 type R1120 : 09/1968 to 09/1971
- R4 type R1123 : 09/1968 to 09/1968

- R4 4CV van R2105 : 09/1968 to 09/1971
- R4 5CV van type R2106 : 09/1968 to 09/1968
- R4 F4 van type R2391 : 09/1972 to 09/1968
- R4 Elevated van type R2108: 10/1972 to 07/1975
- R4 Extended van F6 type R2370: 05/1975 to 09/1968
- R4 Long glass van R2430: 05/1975 to 07/1978

This silent steering rack eye block for Renault 4 (10/1961-12/1993) is true to the original.

This silent rack block for R4 is compatible with all models. It is also compatible with many contemporary Renault and Alpine models.

Compatible models
- R4 type R1120 : 10/1961 to 09/1971
- R4 super type R1122 : 03/1962 to 09/1962
- R4 type R1123 : 12/1963 to 05/1986
- R4 super type R1124 : 09/1962 to 12/1963
- R4 GTL type R1128 : 01/1978 to 12/1993
- R4 Savane type R112C: 09/1986 to 12/1993

- R4 4CV van R2102: 10/1961 to 03/1966
- R4 4CV van type R2104: 02/1965 to 03/1966
- R4 4CV van R2105: 03/1966 to 09/1971
- R4 5HP van type R2106: 03/1966 to 05/1986
- R4 F4 van type R2391: 09/1972 to 05/1986
- R4 Elevated van type R2108: 10/1972 to 07/1975
- R4 Extended van F6 type R2370: 05/1975 to 11/1985
- R4 F6 Pick up type 3C2370: 07/1978 to 11/1985
- R4 Long glass van R2430: 05/1975 to 07/1978
- R4 F4 type R210B: 09/1981 to 05/1990
- R4 F4 station wagon type 239B: 09/1981 to 05/1990