rack

This rack wear ring for 2cvs before 1970 - 34mm

is made of steel, and is for repairing the rack ring located between the two ball joints. Slightly thicker than the original ring, it compensates wear to the rack to reduce steering give/play.

This rack wear ring for 2cvs before 1970 - repair dimension 1- 34.3mm

is made of steel, and is for repairing the rack ring located between the two ball joints. Slightly thicker than the original ring, it compensates wear to the rack to reduce steering give/play.

This kit of parallelism adjustment sleeves for 2CV before 1970 - stainless steel is of superior quality.

These stainless steel sleeves and nuts are of excellent quality. Compatible with all 2CV models and derivatives, they enable precise, long-lasting alignment of your vehicle.

This parallelism adjustment sleeve for 2cv before 1970 - Bi-chromated is a quality reproduction.

It allows the adjustment of the parallelism of all models of 2cv and derivatives.
It's bichromated treatment ensures an excellent resistance to corrosion and guarantees a precise and long-lasting adjustment of the parallelism of your vehicle.

This steering silentblock for 2cvs from 1964 is faithful to the original.

This steering damper is compatible with all models after 1964. Made of rubber, it replaces the springs supporting the steering guidance dies and considerably reduces noise and vibration in the steering.

This rack ball guide die for 2CV A-AZ-AZAM (07/1949-02/1970 ) is true to original.

This brass rack ball holder supports and guides the steering lever ball joints inside the rack.

Compatible models :
- 2CV A type A: 07/1949 to 03/1961
- 2CV AZ type AZ: 10/1954 to 03/1963
- 2CV AZL type AZ: 12/1956 to 03/1963
- 2CV AZLP type AZ: 09/1957 to 03/1963
- 2CV 4x4 "SAHARA" type AZ4/4: 09/1959 to 09/1966
- 2CV AZA type AZ-A: 03/1963 to 02/1970
- 2CV AZAM type AZ-AM: 03/1963 to 09/1967

This moving rack cover slide for 2cvs before 1970 is a quality reproduction.

Made of bichromate steel, this rack slide guides the steering heads.
It is compatible with all 2cv models and derivatives.

This moving steering head cover for 2cvs before 1970 is a quality reproduction.
Made of chrome-plated steel, this cover slides behind the rack's slide.

This classic model 7-tooth steering gear for 2cvs before 1970 is faithful to the original.

It has a gear ratio of 1/14. It is compatible with all models of 2cv cars and derivatives until September 1975 or September 1976 depending on the model.

This steering rod end spring for 2cvs before 1970 is faithful to the original.

It keeps the steering rod end seats under pressure.
Can also be used in the rack to keep the pushrods under pressure.

This steering rack pushrod for 2cvs before 1970 is a faithful reproduction of the original part.

It is compatible with all models of 2cv cars and derivatives.

This steering ring rivet for 2cv vans is specific to rack wear rings.

It is compatible with all models of 2cv cars and derivatives.

This 8-tooth rack for 2cv vans after July 1976 is compatible with all models of 2cv cars and derivatives from 1976 onwards with 8-tooth steering pinions.

This rack wear ring for 2CV Vans - 34mm

is made of steel, and is for repairing the rack ring located between the two ball joints. Slightly thicker than the original ring, it compensates wear to the rack to reduce steering give/play.

This rack wear ring for 2CV Vans - repair dimensions 1- 34.3mm

is made of steel, and is for repairing the rack ring located between the two ball joints. Slightly thicker than the original ring, it compensates wear to the rack to reduce steering give/play.

This set of wheel alignment adjustment sleeves for 2cv vans - stainless steel is high quality.

These stainless steel sleeves and nuts are excellent quality. Compatible with all models of 2cv cars and derivatives, they are designed for precision, durable wheel alignment adjustment on your vehicle.

This 2cv van alignment sleeve - Bichromate is a quality reproduction.

It allows the alignment of all 2cv and derivative models.
It's bichromate treatment ensures excellent corrosion resistance and guarantees a precise and durable alignment of your vehicle.

This steering silentblock for 2cv vans is faithful to the original.

This steering damper is compatible with all models after 1964. Made of rubber, it replaces the springs supporting the steering guidance dies and considerably reduces noise and vibration in the steering.

This rack and pinion ball guide die for 2cv fourgonnette (03/1951-03/1978) is true to original.

This brass rack ball holder supports and guides the steering lever ball joints inside the rack.

Compatible models :
- 2CV AU type AU: 03/1951 to 07/1956
- 2CV AZU type AZU: 10/1954 to 03/1963
- 2CV AK 350 type AK: 04/1963 to 07/1970
- 2CV AZU type AZU-B: 03/1963 to 09/1972
- 2CV AZU 250 type AZU-B/AK-AP: 01/1972 to 03/1978
- 2CV AKS type AK-AK: 07/1970 to 03/1978

This moving rack cover slide for 2cv vans is a quality reproduction.

Made of bichromate steel, this rack slide guides the steering heads.
It is compatible with all 2cv models and derivatives.