rack

This steering head spring for AMI is true to the original.

It keeps the steering rod end seats under pressure.
Can also be used in the rack to keep the pushrods under pressure.

This steering rack pushrod for AMI6s and AMI8s is a faithful reproduction of the original part.

It is compatible with all AMI 6 and AMI 8 cars models.

This complete rack for AMI 8 (03/19659-03/1979) - 8 teeth is a quality remanufacture.

This assembled rack for AMI 8 with 8 teeth is complete. It allows easy replacement of the rack for AMI 8 with 1/17 gear ratio.

It includes the guide, 32-tooth rack, ball joints, cups, springs and new, assembled riveted ring.

Compatible models:
- AMI 8 Sedan type AM3/AM-JA: 03/1969 to 06/1978
- AMI 8 Estate type AM-JB: 09/1969 to 03/1979

Black DANSK protective plate attached to the chassis after the fuel tank, protecting the rack and the auxiliary support connecting the 2 front wishbones from splashes. Suitable for Porsche 911 and 912:
-> Porsche 912:- 912 1.6 from 1966 to 1969
-> Porsche 911:- 911 2.0 from 1965 to 1967- 911 2.0 T / L / E / S from 1967 to 1969 - short and long chassis- 911 2.2 T / E / S from 1970 to 1971- 911 2.4 T / E / S from 1972 to 1973 with 62-liter fuel tank- 911 2.7 Carrera RS from 1973- 911 2.7 from 1974 to 1977-> For 911 2.7 with auxiliary support / aluminum crossmember- 911 2.7 S from 1974 to 1977-> For 911 2.7 S with auxiliary support/aluminum crossmember- 911 Carrera 2.7 from 1974 to 1976-> For 911 Carrera 2.7 with auxiliary support/aluminium crossmember

For Golf 3 & Vento all models except 2.0 GTi & VR6

Power-assisted steering rack (without exchange)

Suitable for :
- Golf 2
- Golf 3
- Passat 3 since 04/88->10/93

Non-power-assisted steering rack (without exchange)
For Golf 2 & Jetta 2 all models 08/83 ->12/90
up to chassis no.->1G-MW-339 715 or ->1G-MB-124 999

Adecuado para:
- Golf y Vento
- Polo Classic 6V2

This complete rack for 2cv Fourgonnette (07/1975-07/1990) - 8 teeth is a quality remanufacture.

This assembled 8-tooth rack for 2CV Fourgonnette is complete. It allows easy replacement of the rack for 2CV and derivatives produced after July 1975 with 1/17 gear ratio.

It includes guide, 32-tooth rack, ball joints, cups, springs and new, assembled riveted ring.

Compatible models:

- 2CV AZU 250 type AZU-B/AK-AP: 07/1975 to 03/1978
- 2CV AKS type AK-AK: 07/1975 to 03/1978

This steering ring rivet for DYANEs and Acadianes is specific to rack wear rings.

It is compatible with all models of Dyanes and Acadianes.

This 8-tooth rack for Dyanes and Acadianes after July 1976 is compatible with all models of 2cv cars and derivatives from 1976 onwards with 8-tooth steering pinions.

This rack wear ring for DYANE and Acadiane - 34mm

is made of steel, and is for repairing the rack ring located between the two ball joints. Slightly thicker than the original ring, it compensates wear to the rack to reduce steering give/play.

This rack wear ring for DYANEs and Acadianes - repair dimensions 1- 34.3mm

is made of steel, and is for repairing the rack ring located between the two ball joints. Slightly thicker than the original ring, it compensates wear to the rack to reduce steering give/play.

This set of wheel alignment adjustment sleeves for DYANEs and Acadianes - stainless steel is high quality.

These stainless steel sleeves and nuts are excellent quality. Compatible with all models of DYANEs and Acadianes, they are designed for precision, durable wheel alignment adjustment on your vehicle.

ThisAlignment Sleeve for Dyane and Acadiane - Bichromate is a quality reproduction.

It allows for the alignment of all 2cv models and derivatives.
It's bichromate treatment ensures excellent corrosion resistance and guarantees a precise and long-lasting alignment of your vehicle.

This steering silentblock for DYANEs and Acadianes is faithful to the original.

This steering damper is compatible with all models. Made of rubber, it replaces the springs supporting the steering guidance dies and considerably reduces noise and vibration in the steering.

This rack and pinion ball guide die for Dyane and Acadiane (08/1967-03/1987 ) is true to original.

This brass rack ball holder supports and guides the steering lever ball joints inside the rack.

Compatible models:
- DYANE (425) type AYA: 08/1967 to 01/1969
- DYANE 4 type AYA2: 03/1968 to 08/1975
- DYANE D6 type AYA3: 01/1968 to 04/1968
- DYANE 6 type AYA3/AYB/AY-CB: 05/1968 to 08/1983
- Acadiane type AY-CD: 03/1978 to 03/1987

This moving rack cover slide for Dyanes and Acadianes is a quality reproduction.

Made of bichromate steel, this rack slide guides the steering heads.
It is compatible with all 2cv models and derivatives.

Thismoving steering head cover for Dyanes and Acadianes is a quality reproduction.
Made of chrome-plated steel, this cover slides behind the rack's slide.

This classic model 7-tooth steering gear for DYANEs up to September 75 is faithful to the original.

It has a gear ratio of 1/14. It is compatible with all DYANE models until July 1975.