rack

For VOLKSWAGEN Transporter T5, all models.

This steering ring rivet for Meharis is specific to rack wear rings.



It is compatible with all models of 2cv cars and derivatives.

Non power steering rack for VOLKSWAGEN T4 from 1990 to 1996 all versions without power steering.

This steering silentblock for 2cv vans is faithful to the original.

This steering damper is compatible with all models after 1964. Made of rubber, it replaces the springs supporting the steering guidance dies and considerably reduces noise and vibration in the steering.

This steering silentblock for DYANEs and Acadianes is faithful to the original.

This steering damper is compatible with all models. Made of rubber, it replaces the springs supporting the steering guidance dies and considerably reduces noise and vibration in the steering.

This complete rack for 2cv AZ-AZAM (05/1965-02/1970) - 7 teeth is a quality remanufacture.

This assembled 7-tooth rack for 2CV AZ-AZAM is complete. It allows easy replacement of the rack for 2CVs and derivatives produced before July 1975 with 1/14 gear ratio. Includes guide, 24-tooth rack, ball joints, cups, springs and new, assembled riveted ring.

Compatible models:

- 2CV AZA type AZ-A: 05/1965 to 02/1970
- 2CV AZAM type AZ-AM: 05/1965 to 09/1967

This steering ring rivet for 2cvs is specific to rack wear rings.

It is compatible with all models of 2cv cars and derivatives.

This classic model 8-tooth steering gear for 2cv cars and derivatives is faithful to the original.

Compatible with all 2cvs and derivatives with 8-tooth racks.
It has a gear ratio of 1/17 in place of the 7-tooth sprocket.

Black DANSK protective plate attached to the chassis after the fuel tank, protecting the rack and the auxiliary support connecting the 2 front wishbones from splashes. Suitable for Porsche 911 and 912:
-> Porsche 912:- 912 1.6 from 1966 to 1969
-> Porsche 911:- 911 2.0 from 1965 to 1967- 911 2.0 T / L / E / S from 1967 to 1969 - short and long chassis- 911 2.2 T / E / S from 1970 to 1971- 911 2.4 T / E / S from 1972 to 1973 with 62-liter fuel tank- 911 2.7 Carrera RS from 1973- 911 2.7 from 1974 to 1977-> For 911 2.7 with auxiliary support / aluminum crossmember- 911 2.7 S from 1974 to 1977-> For 911 2.7 S with auxiliary support/aluminum crossmember- 911 Carrera 2.7 from 1974 to 1976-> For 911 Carrera 2.7 with auxiliary support/aluminium crossmember

Protective gaiter for steering rack.
2 tightening clamps required.

For Beetle 1303 Hatchback& Cabriolet, 08/1974 ->01/1980
from chassis no. 135 2000 001->

This moving rack cover slide for 2cvs is a quality reproduction.

Made of bichromate steel, this rack slide guides the steering heads.
It is compatible with all 2cv models and derivatives.

This rack ball guide die for AMI6 and AMI8 (04/1961-03/1979 ) is true to original.

This brass rack ball holder supports and guides the steering lever ball joints inside the rack.

Compatible models:
- AMI 6 Sedan type AM/AM2: 04/1961 to 03/1969
- AMI 6 Estate type AMB/AMB2: 10/1964 to 09/1969
- AMI 8 Sedan type AM3/AM-JA: 03/1969 to 06/1978
- AMI 8 Estate type AM-JB: 09/1969 to 03/1979

Non-power-assisted steering rack (without exchange)
For Golf 2 & Jetta 2 all models 08/83 ->12/90
up to chassis no.->1G-MW-339 715 or ->1G-MB-124 999

For Golf 3 & Vento all models except 2.0 GTi & VR6

Power-assisted steering rack (without exchange)

This 2cv van alignment sleeve - Bichromate is a quality reproduction.

It allows the alignment of all 2cv and derivative models.
It's bichromate treatment ensures excellent corrosion resistance and guarantees a precise and durable alignment of your vehicle.

This 8-tooth rack for Meharis after July 1976 is compatible with all models of 2cv cars and derivatives from 1976 onwards with 8-tooth steering pinions.

Complete set of hydraulic steering rack gaskets for BMW 3 Series E30 with manual or automatic gearbox from 11/1986 :

- All models (including M3)

ATTENTION : Not suitable for the 325ix 4WD version!

This seal kit will allow you to completely refurbish your hydraulic steering mechanism.

Steering rack mounting bush for VOLKSWAGEN Transporter T4, Multivan from 09/1990 to 08/1992 up to chassis no. 70-P-004342.
Internal diameter: 8 mm
4 required, sold individually.

This 8-tooth rack for 2cvs from 1976 onwards is compatible with all models of 2cv cars and derivatives from 1976 onwards with 8-tooth steering pinions.

This steering rack pushrod for 2cvs is a faithful reproduction of the original part.

It is compatible with all models of 2cv cars and derivatives.