Cardan dust

Kit of universal joint bellows for Porsche 911 and 930 from 1985 to 1989 :

-> Porsche 911 :
- 911 Carrera 3.2 of 1985 with gearbox 915.72 and 915.73
- 911 Carrera 3.2 from 1986 to 1989
- 911 Carrera 3.2 from 1987 to 1989 M491 Turbo Look

-> Porsche 930 :
- 911 3.3 Turbo from 1985 to 1986 with gearbox 930.36 and 930.37

Suitable for right and left drive shaft, gearbox side as wheel side.

Sold individually.

Drive shaft dust bellows, original Porsche, for rear axle of Porsche 911 and 930 from 1969 to 1985 :

- 911 2.0 of 1969
- 911 2.0 T / E / S of 1969
- 911 2.2 T / E / S from 1970 to 1971
- 911 2.4 T / E / S from 1972 to 1973
- 911 2.7 Carrera RS of 1973
- 911 2.7 from 1974 to 1975
- 911 2.7 S from 1974 to 1975
- 911 Carrera 2.7 from 1974 to 1975
- 911 Carrera 3.0 from 1976 to 1977
- 911 Carrera 3.2 Turbo Look M491 of 1984 with manual gearbox type 915.69 and 915.70
- 911 3.0 Turbo from 1975 to 1977
- 911 3.3 Turbo from 1978 to 1985 with manual gearbox type 930.34 and 930.36

Not suitable for 911 3.0 SC

-> For the 911 with 2.7 engine of 1975 this drive shaft bellows is assembled to chassis numbers :
- 911 Coupe 2.7 to 1975 and chassis N°91151 00727
- 911 Targa 2.7 to 1975 and chassis N°91151 10609
- 911 S Coupe 2.7 to 1975 and chassis N°91153 00272
- 911 S Targa 2.7 to 1975 and chassis N°91153 10147
- 911 Carrera 2.7 Coupe to 1975 and chassis N°91156 00320
- 911 Carrera 2.7 Targa to 1975 and chassis N°91156 10119

-> USA/CDN version
- 911 S Coupe 2.7 to 1975 and chassis N°91152 01529
- 911 S Targa 2.7 to 1975 and chassis N°91152 10859
- 911 Carrera 2.7 Coupe to 1975 and chassis N°91154 00173
- 911 Carrera 2.7 Targa to 1975 and chassis N°91154 10088

Suitable for right and left drive shaft, gearbox side andwheel side.

Sold individually.

For Audi 100 type 43:
- All models

For Audi 100 type 44 up to ->12/87:
- 1.8 75hp (DR, RS)
- 1.8 88hp and 90hp (DS, PH, SH)
- 1.9 100hp (WH)
- 2.0 Diesel 70hp (CN)
- 2.0 Turbo Diesel 87hp (from)
- 2.0 113hp and 115hp (SL, KP)
- 2.1 115hp, 131hp and 136hp (WB, KF, WC)
- 2.2 107hp and 115hp (KZ, WU)
- 2.2 137hp (HX, KU)
- 2.3 136hp (NF)

Ce kit de réparation de cardan coté boîte pour Renault 4 - Billancourt est fabriqué en Europe.

ce kit soufflet de cardan coté boite pour Renault 4 à moteur Billancourt comprend le soufflet, un pochon de graisse et les 2 colliers.

Modèles compatibles :
Billancourt 747 cc, moteurs Type 680-01, 680-02 et 680-702.
- R4 type R1120 : 10/1961 à 09/1971
- R4 super type R1122 :  03/1962 à 09/1962
- R4 Fourgonnette 4CV R2102 : 10/1961 à 03/1966
- R4 Fourgonnette 4CV R2105 : 03/1966 à 09/1971

Billancourt 845 cc, moteurs Type 800-01, 800-02, 800-03, 800-05, B1B-707 et B1B D7-07.
- R4 type R1123 : 12/1963 à 05/1986
- R4 super type R1124 :  09/1962 à 12/1963
- R4 Fourgonnette 4CV type R2104 : 02/1965 à 03/1966
- R4 Fourgonnette 5CV type R2106 : 03/1966 à 05/1986
- R4 Fourgonnette F4 type R2391 :  09/1972 à 05/1986

115mm wheel-sidetransmission bellows repair kit for Peugeot 205 all models
Inside diameter 1 [mm]: 20Inside diameter 2 [mm]: 78Length [mm] : 115

Front cardan shaft bellows for VW Transporter T4, incl. Syncro (4x4) :
- 2.5 TDI 151hp (AHY, AXG)- 2.8 V6 204hp (AMV)
The kit contains everything you need for installation.
The kit is sold individually and is suitable for either the left or right interior side.

Boitier d'arbre secondaire de transmission avant pour VOLKSWAGEN Transporter T4 syncro de 1993 à 1995 jusqu'à la boite n°10 03 4et avec code de boite :
- ARF, CLY, CTV, ARL, CRW, CLZ, CRV, CLX, CLW

Bellows only for 1 rear inner or outer side for VW Transporter T25 / T3 Syncro (4x4) with 16" inch wheels, all engines from 1985 to 1992.
Diameter 108 mm. Top quality.

Left or right rear driveshaft for VW Combi Bay Window from 08/1967 to 07/197.Length : 198 mm

Cardan shaft bellow wheel side 85mm for Peugeot 205
External cardan shaft bellows
Assignments :
- 1.6 GT, XS 1580cm3 89hp[lm1] (XU5M) from to 07/1992- 1.6 GT, XS 1580cm3 89hp (XU5M/Z) from 08/1992 to 07/1993- 1.6 Automatic 1580cm3 80hp (XU51C) from 08/1985 to 07/1987- 1.6 Automatic 1580cm3 80hp (XU51C) from 08/1987 to 07/1993- 1.6 Automatic catalyzed 1580cm3 89hp (XU5M/Z) from 08/1993 to 08/1994- 1.6 GTI 1580cm3 105hp (XU5J) from 03/1984 to 12/1986- 1.6 GTI 1580cm3 115hp (XU5JA) from 03/1986 to 12/1986- 1.6 GTI 1580cm3 115hp (XU5JA) from 01/1987 to 07/1992- 1.8 GLD, GRD, SRD 1769cm3 60hp (XUD7) from 09/1983 to 07/1987- 1.8 XLD, XRD, XTD 1769cm3 60hp (XUD7) from 08/1984 to 07/1987- 1.8 GLD, GRD, GTD, XLD, XRD, XTD 1769cm3 60hp (XUD7) from 08/1987 to 12/1998- 1.8 Dturbo 1769cm3 78hp (XUD7T) from 08/1990 to 12/1998- 1.9 D 1905cc 65hp (XUD9)- 1.9 GTI 1905cm3 130hp (XU9JA) from 01/1987 to 07/1992- 1.9 GTI Catalyzed 1905cm3 122hp (XU9JA/Z) from 08/1992 to 12/1993- 1.9 Gentry 1905cm3 105hp (XU9J1/Z) from 08/1991 to 12/1993
Peugeot 205 Cabriolet- 1.6 CTI 1580cm3 115hp (XU5JA) from 08/1985 to 07/1992- 1.9 CTI Catalysée 1905cm3 105hp (XU9J1/Z) from 08/1991 to 12/1993
Also fits Export models with Talbot E1- F1- G1- J2- Y2 engine

CV boot kit for:

- MX5 NC-NCFL 1.8L and 2.0L

Front suspension upper linkage ball joint boot for Mazda MX-5 NC and NCFL

For all NC and NCFL models
Sold individually, right or left

Original MAZDA part

For Passat 4 (including models with automatic gearbox):
- 1.6 100hp (ADP, AHL, ANA, ARM)
- 1.8 115hp & 125hp (AFY, ADR, APT, ARG)
- 1.8 150hp (AEB, ANB, APU)
- 1.9 TDi 90hp (AHH, AHU)
- 2.3 150hp (AGZ)

For Passat 5:
-1.6 102hp (ALZ)
- 1.8 150hp (AWT)
- 2.0 115hp (AZM) including modelswith automatic gearbox
- 2.0 131hp (ALT)

Kit of universal joint bellows for Porsche :

- 964 Carrera 2
- 964 Carrera 4 -> front final drive side
- 964 Turbo 3.3 & 3.6
- 993 Carrera 2
- 993 Carrera 4 -> front final drive side
- 928 from 1980 to 1995 -> gearbox side

Suitable for the following models, up to ->07/06:
- R50 Cooper Coupé
- R50 One 1.4i Coupé
- R50 One1.6i Coupé
- R52Cooper Cabriolet
- R52 One Cabriolet

For VW Transporter T5 (7E, 7F) ->2015,
with 5-speed manual gearbox.
- 1.9 TDI 84hp (BRR),85hp (AXC), 102hp (BRS), 105hp (AXB)
- 2.0 E 115hp (AXA)
For first mount universal joints with thermoplastic and not rubber bellows. (To be checked beforehand).

Front right or left interior CV boot for VOLKSWAGEN Transporter T6 with 6-speed manual gearbox.
- 2.0 TDi 140hp (CAAC)
- 2.0 TSi 150hp (CJKA)
- 2.0 TDi 150hp (CXFA, CXHA)
- 2.0 TDi 180hp (CFCA)

For VW Transporter T5 (7H, 7J) 2003 ->2010,
with 6-speed manual gearbox.
(including 4 Motion)
- 2.5 TDi 130hp (AXD), 131hp (BNZ), 163hp (BLJ), 174hp (AXE/BPC)

For VW Transporter T5 (7E, 7F) 26/04/2010 ->
with 6-speed manual gearbox,
(including 4 Motion)
- 2.0 TDi 136hp (CAAE, CCHB)
- 2.0 TDi 140hp (CAAC, CCHA)
- 2.0 TDi 180hp (CFCA)

For Polo 6N1:
- 1.6 120hp (AJV)

For Polo 6N2:
- 1.4 TDi 75hp (AMF)
- 1.6 125hp (ARC, AVY)

For Golf 4 and Bora,
from chassis 1J-3D019 782-> or 1J-3W46 8502->,
with automatic gearbox
- 1.9 TDi 100hp (ATD)
- 1.9 TDi 130hp (ASZ)
- 1.8 150hp (AUM)
- 2.3 170hp (AQN)