Cardan dust

This collar for cardan shaft bellows, small model, is suitable for all cardan shaft bellows on your Citroën 2Cv fourgonnette.
4 are required for a complete universal joint.1 for the wheel-side bellows1 for the cardan shaft bellows on the gearbox side2 for the intermediate bellows

This collar for large cardan shaft bellows is suitable for the cardan shaft bellows on the wheel and gearbox sides of your Citroën Ami 6 and Ami 8.
2 are required for a complete cardan shaft.1 for the wheel-side bellows1 for the cardan shaft bellows on the gearbox side

This large cardan shaft collar is suitable for both wheel-side and gearbox-side cardan shafts on your Citroën 2Cv A/AZAM.
2 are required for a complete universal joint.1 for the wheel-side bellows1 for gearbox-side bellows

This large cardan shaft collar is suitable for both wheel-side and gearbox-side cardan shafts on your Citroën Dyane and Acadiane.
2 are required for a complete universal joint.1 for the wheel-side bellows1 for gearbox-side bellows

Rubber Cardan Bellows Gearbox Side for Citroën ID (09/1965 - 03/1970)
Rubber cardan bellows, mounted on the gearbox side, specially designed for Citroën IDs produced between September 1965 and March 1970. Suitable for use with the aluminum inner joint used from 1966 to 1970.
It effectively protects the constant velocity joints from dust, moisture and splashes, thus ensuring transmission longevity and performance.
Replacement of this bellows is recommended in the event of cracks, crazing, grease leakage, or simply as part of preventive maintenance or a complete restoration, to avoid premature wear of the universal joint.
Compatible models :ID 19/20 Sedans (1985cc) - (1967-1971)ID 19/20 Estate (1985cc) - (1966-1969)ID 21 Estate (2175cc) - (1966-1969)

Rubber transmission bellows on the gearbox side for Citroën Traction 11CV from July 1955.
This rubber transmission bellows seals the cardan shaft on the gearbox side. It effectively protects mechanical components from water, dust and dirt, prolonging their service life and ensuring optimal operation.
Dimensions: inside diameter 30 and 90mm
Compatible models :Traction Avant 11C Commercial 11 "Performance", type 11B from 07/1955 to 1957, Engine, type 11cv D 1911cc (59hp)- Traction Avant 11BL Berline 4 portes 11 "légère" "Performance", type 11BL de 07/1955 à 02/1956, Moteur, type 11cv D 1911cc (59cv)- Traction Avant 11B Berline 4 portes 11 "Performance", type 11B de 07/1955 à 07/1957, Moteur, type 11cv D 1911cc (59cv)

Rubber Cardan Bellows Gearbox Side for Citroën DS (09/1965 - 03/1970)
Rubber cardan bellows, mounted on the gearbox side, specially designed for Citroën DS produced between September 1965 and March 1970. Suitable for use with the aluminum inner joint used from 1966 to 1970.
It effectively protects the constant velocity joints from dust, moisture and splashes, thus ensuring transmission longevity and performance.
Replacement of this bellows is recommended in the event of cracks, crazing, grease leakage, or simply as part of preventive maintenance or a complete restoration, to avoid premature wear of the universal joint.
Compatible models:DS 19/20 Sedans (1985cc) - (1966-03/1970)DS 21 Sedans and Cabriolets (2175cc) - (1966-1969)

External CV boot kit for Mercedes

For Mercedes W123, C123 and S123 all models

Mounts on the wheel side, on the right or left driveshaft

Kit for one side including boot, O-rings, clamps and grease

Boot diameter: 25/63mm
Length 98.5mm
Made of rubber

Inner driveshaft boot kit for Mercedes

For Mercedes W123, C123 and S123 all models

Mounts on the gearbox side, on the right or left driveshaft

Kit for one side including boot, clamps and grease

Boot diameter: 25/63mm
Length 98.5mm
Made of rubber

Suitable for the following models, up to ->07/06:
- R50 Cooper Coupé
- R50 One 1.4i Coupé
- R50 One1.6i Coupé
- R52Cooper Cabriolet
- R52 One Cabriolet

Boot kit with slit for rear-axle cross-tube for all Porsche 356 :

-> Porsche 356 pre-A :
- 356 1100 - 40 hp (369) from 1950 to 1954
- 356 1300 - 44 hp (506 and 506/2) from 1951 to 1955
- 356 1300 S - 60 hp (589 and 589/2) from 1954 to 1955
- 356 1500 Cabriolet - 60 cv (527) from 1952
- 356 1500 - 55 hp (546 and 546/2) from 1953 to 1955
- 356 1500 S - 70 hp (528 and 528/2) from 1953 to 1955

-> Porsche 356 A :
- 356 A 1300 - 44 hp (506/1) from 1956 to 1957
- 356 A 1300 S - 60 hp (589/2) from 1956 to 1957
- 356 A 1600 - 60 hp (616/1) from 1956 to 1959
- 356 A 1600 S - 75 hp (616/2) from 1956 to 1959

-> Porsche 356 B T5 :
- 356 B 1600 - 60 hp (616/1) from 1960 to 1961
- 356 B 1600 S - 75 hp (616/2) from 1960 to 1961
- 356 B 1600 Super 90 - 90 hp (616/7) from 1960 to 1961

-> Porsche 356 B T6 :
- 356 B 1600 - 60 hp (616/1) from 1962 to 1963
- 356 B 1600 S - 75 hp (616/12) from 1962 to 1963
- 356 B 1600 Super 90 - 90 hp (616/7) from 1962 to 1963

-> Porsche 356 C :
- 356 C 1600 - 75 hp (616/15) from 1964 to 1965
- 356 SC 1600 - 95 hp (616/16) from 1964 to 1965

Also suitable for Carrera versions

The slotted system allows the boot to be replaced without removing the rear-axle cross-tube.

Think of the clamp for universal boot reference UO10441

Contains fasteners.

Quantity required per car : 2

Sold individually

This split sleeve makes installation easy, as it does not require removing the trumpet.
This trumpet bellows comes complete with screws and 2 original clamps for a perfect seal. You can replace them with Serflex universal clamps if you wish.
Left- or right-hand mounting.
Sold individually, in German quality.

For VOLKSWAGEN Combi Split Brazil (1957-1975)

This split sleeve makes installation easy, as it does not require removing the trumpet.
This trumpet bellows comes complete with screws and 2 original clamps for a perfect seal. Remember to order the UO10441 clamp. You can replace them with Serflex universal clamps if you wish.
Left- or right-hand mounting.
Sold individually, in German quality.

For models with trumpet rear axle:
- VW Beetle 1200, 1300, 1500 (not 1302 / 1303), Karmann-Ghia, Type 3, Combi Split, Porsche 356

Not suitable for models with universal joints.

For Passat 3 from chassis 31-M-000 001-> until 1991:
- 1.6 72hp (RF)
- 1.6 75hp (EZ, 1F)
- 1.6 turbo Diesel 80hp (SB)
- 1.9 turbo Diesel 75hp (AAZ)

For Passat 3 until ->1991:
- 1.875hp and 90hp (AAM, RP)
- 1.8 8s 107hp and 112hp (PF, PB)
- 1.8 16s 136hp (KR)
- 1.9 Diesel 64hp (1Y)
- 2.0 115hp (2E)
- 2.0 16s 136hp(9A)

Golf 1 Cabriolet (right side) :
- 1.8 with carburetor 08/87->
- 1.8 GLi 08/84->

Golf 2 (right side) :
- 1.8 with carburetor 08/89->
- 1.8 GTi 8s, 16s & G60

Golf 3 (right side) :
- 1.6 94->
- 1.8 monopoint
- 1.9 TDi
- 2.0 GTi 8s &16s
- 2.8 & 2.9 VR6

For Golf 4:
- 1.8 125hp (AGN)
- 1.9 TDi 90hp (ALH, AGR)
- 1.9 TDi 110hp (AHF, ASV)
- 1.9 TDi 100hp (ATD)
- 2.0 115hp (APK, AQY, AZH, AZG, BEH, AZJ)

For New Beetle:
- 1.6 102hp(AYD, BFS)
- 1.9 TDi 90hp (ALH)
- 1.9 TDi 100hp (ATD, BEW)
- 1.9 TDi105hp (BSW)
- 2.0 115hp (AQY, AZJ, BER)

For Golf 4:
- 1.8 125hp (AGN)
- 2.0 115hp (APK, AQY, AZG, AZH)

Pour Polo 6N1 :
- 1.0 50cv (AER, ALL)
- 1.05 45cv (AEV)
- 1.3 54cv (ADX)
- 1.4 54cv (ANX)
- 1.4 60cv (AEX, AKV, APQ)
- 1.4 100cv (AFH)
- 1.6 75cv (AEA, AEE, AHS)
- 1.7 SDi 57cv et 60cv (AHG, AKU)
- 1.9 SDi 64cv (AEF, AGD)

Pour Polo 6N2 avec boite automatique :
- 1.4 54cv (AKP)
- 1.4 60cv (AKK, AUD)
- 1.4 75cv (AHW, APE, AUA)

Pour Polo 6N2 avec boite manuelle :
- 1.0 50cv (ALD, AUC)
- 1.4 54cv (AKP)
- 1.4 60cv (AKK, AUD)
- 1.4 75cv (AHW, AUA)
- 1.4 100cv (AFK, AUB)
- 1.7 D 60cv (AKU)
- 1.9 D 64cv (AEF, AGD, ASX)

For Polo 6N1:
- 1.6 120hp (AJV)

For Polo 6N2:
- 1.4 TDi 75hp (AMF)
- 1.6 125hp (ARC, AVY)

For Polo 86 / 86C:
- RH interior side, all models (except G40 and Diesel)
- inner LH side, all models (except Diesel) up to chassis ->80-H-168 730