Cardan dust

This intermediate drive shaft bellows repair kit for 2cv enables the replacement of the central drive shaft bellows.

It contains, the bellows, a grease bag and a collar.

Degrease the drive shaft properly and replace all worn parts with this complete set.

These cardan shaft bellows for DYANE and Acadiane are compatible with all models from September 1965 onwards.

Made of rubber, it seals the cardan joint on the gearbox side. Requires two clamps and greasing with cardan grease.

This intermediate cardan shaft bellows for Mehari is compatible with all drive shaft models.

Made of rubber, it seals the cardan joint on the gearbox side. Requires two clamps and greasing with cardan grease.

This CV boot for 2cvs after 1968 is compatible with all models from September 1968.

Made of rubber, it seals the CV boot on the gearbox side. Requires two clamps and greasing with PTO grease.

These gearbox-side cardan shaft bellows for 2cv from 1968 are compatible with all models from June 1968 onwards.

Made of rubber, it seals the cardan joint on the gearbox side. Requires two clamps and greasing with cardan grease.

These wheel-side cardan shaft bellows for 2CV Van after 1968 are compatible with all models from 1968 onwards.

Made of rubber, it seals the cardan joint on the gearbox side. Requires two clamps and greasing with cardan grease.

These cardan shaft bellows for 2cv after 1968 is compatible with all models from June 1968.

Made of rubber, it seals the cardan joint on the gearbox side. Requires two clamps and greasing with cardan grease.

This homokinetic cardan shaft bellow for 2cv Van until 1968 is a quality reproduction.

The rubber tyre collar is specific to homokinetic cardan bellows.
It seals the cardan bellows and prevents water and particles from penetrating the bellows and the cardan grease from escaping.

This homokinetic cardan shaft bellows clamp for 2cv until 1968 is a quality reproduction.

The rubber tyre collar is specific to homokinetic cardan bellows.
It seals the cardan bellows and prevents water and particles from penetrating the bellows and the cardan grease from escaping.

This homokinetic gimbal collar for AMI6 up to June 1968 is a quality reproduction.

The rubber tire collar is specific to homokinetic cardan bellows.
It seals cardan bellows, preventing water and particles from penetrating the bellows and cardan grease from escaping.

This left front cardan shaft bellows kit for Renault 5 (01/1972-12/1985) - box side is true to original.

This set of gaskets and bellows for the left front drive shaft for Renault R5 is compatible with many Renault models produced from the 70s to the 2000s.

!! Ring dimensions:
Outside diameter: 47.3 mm
Inside diameter: 25.7 mm
Height: 27 mm

It is composed of the following elements:
- 1 AVG bellows diam 30/85mm- 1 stainless steel collar- 1 can sealing ring- 1 grease bag

This cardan shaft bellows kit for Renault 5 (01/1972-12/1985) - wheel side is compatible with a large number of models.This cardan shaft bellows kit for Renault is of excellent quality and comes complete with grease and clamps.
Compatible with all Renault 5 and Supercing models, it is compatible with a large number of contemporary R5 models.

For X5 E53 :
- 3.0 d M57 with automatic transmission
- 3.0 i M54 with automatic transmission
- 4.4 i M62

Cardan shaftbellows kit for Bmw 7 Series:
Bmw 7 Series E38:
- 728i 6cyl 193hp from 10/1995 to 09/1998 (engine code m52b28)- 728iL 6cyl 193hp from 10/1995 to 09/1998 (engine code m52b28)- 728i 6cyl 193hp from 09/1998 to 07/2001 (engine code m52b28tu)- 728iL 6cyl 193hp from 09/1998 to 07/2001 (engine code m52b28tu)- 730i 8cyl 218hp from 07/1993 to 03/1996 (engine code m60b30)- 730iL 8cyl 218hp from 05/1994 to 03/1996 (engine code m60b30)- 725Tds 6 cyl 143hp from 07/1995 to 02/2000 (engine code m51d25)
Please note! Compatible only with Bmw 7 Series E38 automatic gearbox.
Need 2 kits for one vehicle.
Sold individually.

Meyle OE cardan shaft bellows wheel side for Bmw z1:
Bmw z1 E30 Roadster :
- 2.5i 6cyl 170hp from 07/1988 to 06/1991 (engine code m20b25)

Open lock washer for rear wheel cup, left or right-hand side.
Fitted between the bearing and the wheel shaft or tulip. 2 required, sold per unit. Dimensions: 24.5 x 2 mm
For:
- Beetle 1302, 1303& Automatic from 08/1967->
- Karmann-Ghia
- Type 3
- Combi Bay Window
- Transporter T25/T3
- 181, Buggy, 356 Replica
with Type 1 gearbox with universal joints (diameter: 90 mm).

This collar for large cardan shaft bellows is suitable for the cardan shaft bellows on the wheel and gearbox sides of your Citroën 2Cv van.
2 are required for a complete universal joint.1 for the wheel-side bellows1 for gearbox-side bellows

Engine-sideuniversal joint bellows kit for Peugeot 205 with XU engine
This cardan shaft bellows on the inner part of the cardan shaft, gearbox side.
Features :Inside diameter 1: 21mmInside diameter 2: 62mm
Assignments :- 1.6 GT, XS 1580cm3 89hp[lm1] (XU5M) from to 07/1992- 1.6 GT, XS 1580cm3 89hp (XU5M/Z) from 08/1992 to 07/1993- 1.6 Automatic 1580cm3 80hp (XU51C) from 08/1985 to 07/1987- 1.6 Automatic 1580cm3 80hp (XU51C) from 08/1987 to 07/1993- 1.6 Automatic catalyzed 1580cm3 89hp (XU5M/Z) from 08/1993 to 08/1994- 1.6 GTI 1580cm3 105hp (XU5J) from 03/1984 to 12/1986- 1.6 GTI 1580cm3 115hp (XU5JA) from 03/1986 to 12/1986- 1.6 GTI 1580cm3 115hp (XU5JA) from 01/1987 to 07/1992- 1.8 GLD, GRD, SRD 1769cm3 60hp (XUD7) from 09/1983 to 07/1987- 1.8 XLD, XRD, XTD 1769cm3 60hp (XUD7) from 08/1984 to 07/1987- 1.8 GLD, GRD, GTD, XLD, XRD, XTD 1769cm3 60hp (XUD7) from 08/1987 to 12/1998- 1.8 Dturbo 1769cm3 78hp (XUD7T) from 08/1990 to 12/1998- 1.9 D 1905cc 65hp (XUD9)- 1.9 GTI 1905cm3 130hp (XU9JA) from 01/1987 to 07/1992- 1.9 GTI Catalyzed 1905cm3 122hp (XU9JA/Z) from 08/1992 to 12/1993- 1.9 Gentry 1905cm3 105hp (XU9J1/Z) from 08/1991 to 12/1993
Cabriolet :- 1.6 CTI 1580cm3 115hp (XU5JA) from 08/1985 to 07/1992- 1.9 CTI Catalyzed 1905cm3 105hp (XU9J1/Z) from 08/1991 to 12/1993

Cardan shaft bellow wheel side 85mm for Peugeot 205
External cardan shaft bellows
Assignments :
- 1.6 GT, XS 1580cm3 89hp[lm1] (XU5M) from to 07/1992- 1.6 GT, XS 1580cm3 89hp (XU5M/Z) from 08/1992 to 07/1993- 1.6 Automatic 1580cm3 80hp (XU51C) from 08/1985 to 07/1987- 1.6 Automatic 1580cm3 80hp (XU51C) from 08/1987 to 07/1993- 1.6 Automatic catalyzed 1580cm3 89hp (XU5M/Z) from 08/1993 to 08/1994- 1.6 GTI 1580cm3 105hp (XU5J) from 03/1984 to 12/1986- 1.6 GTI 1580cm3 115hp (XU5JA) from 03/1986 to 12/1986- 1.6 GTI 1580cm3 115hp (XU5JA) from 01/1987 to 07/1992- 1.8 GLD, GRD, SRD 1769cm3 60hp (XUD7) from 09/1983 to 07/1987- 1.8 XLD, XRD, XTD 1769cm3 60hp (XUD7) from 08/1984 to 07/1987- 1.8 GLD, GRD, GTD, XLD, XRD, XTD 1769cm3 60hp (XUD7) from 08/1987 to 12/1998- 1.8 Dturbo 1769cm3 78hp (XUD7T) from 08/1990 to 12/1998- 1.9 D 1905cc 65hp (XUD9)- 1.9 GTI 1905cm3 130hp (XU9JA) from 01/1987 to 07/1992- 1.9 GTI Catalyzed 1905cm3 122hp (XU9JA/Z) from 08/1992 to 12/1993- 1.9 Gentry 1905cm3 105hp (XU9J1/Z) from 08/1991 to 12/1993
Peugeot 205 Cabriolet- 1.6 CTI 1580cm3 115hp (XU5JA) from 08/1985 to 07/1992- 1.9 CTI Catalysée 1905cm3 105hp (XU9J1/Z) from 08/1991 to 12/1993
Also fits Export models with Talbot E1- F1- G1- J2- Y2 engine

This small cardan shaft collar fits all the cardan shaft bellows on your Citroën Mehari.
4 are required for a complete universal joint.1 for the wheel-side bellows1 for the cardan bellows on the gearbox side2 for the intermediate bellows