Gearbox linkage

Speed control silentblock consisting of a rubber silentblock 12 x 16 x 19 x 14.5mmand two nylon bushes 10 x 12 x 17 x 7.5mm.
This silentbloc will improve gear shifting.
Compatible with all Citroën ID models.

Clutch control ball stud for VOLKSWAGEN Transporter T4 from 1991 to 2003 including Syncro:
- All engines

Gearshift lever on manual gearbox for VOLKSWAGEN Transporter T4, Multivan from 1990 to 1998 up to chassis n°70-W-008645 :
- 1.8 Petrol 66hp (PD)
- 1.9 Diesel 60hp (1X)
- 1.9 Turbo-Diesel 68hp (ABL)
- 2.0 Petrol 84hp (AAC)
- 2.4 Diesel 78hp (AAB)
- 2.5 Petrol 110hp (AAF, ACU, AET, AEU)
- 2.5 Petrol 115hp (APL, AVT)

Control linkage relay lever on manual gearbox.

For VOLKSWAGEN Transporter T4, Multivan, Caravelle... from 1998 and from chassis n°70-W-008646:
- 1.8 Petrol 66hp (PD)
- 1.9 Diesel 60hp (1X)
- 1.9 Turbo-diesel engine 68hp (ABL)
- 2.0 Petrol 84hp (AAC)
- 2.4 Diesel 78hp (AAB)
- 2.5 Petrol 110hp (AAF, ACU, AET, AEU)
- 2.5 Petrol 115hp (APL, AVT)

Linkage reversing lever for VOLKSWAGEN Transporter T4 from 1996 to 2003:
- 2.5 TDi 88hp (AJT, AYY)
- 2.5 TDi 102hp (ACV, AYC, AUF)
- 2.5 TDi 151hp (AHY, AXG)
- 2.8 petrol 140hp (AES)

Shift lever clamping ring for VW Transporter T25 / T3 from 05/1979 to 07/1992.

This pin slip ring or bushing allows the shift of the gear selector shaft to slide. They are located on the Porsche 914 gearboxes produced between 1970 and 1972 :

- 914-4 1.7 - 80 hp (022-W) from 1970 to 1972
- 914-4 1.7 - 80 hp (022-EA) of 1972
- 914-4 1.7 - 72 hp (022-EB) of 1972
- 914-6 2.0 - 110 hp (901.36/37/38/39) from 1970 to 1972

Quantity required per vehicle: 3

Gearbox selection shaft ball joint casing for Porsche 914-4 produced from 1973 :

- 914-4 1.7 - 80 hp (022-W) of 1973
- 914-4 1.7 - 80 hp (022-EA) of 1973
- 914-4 1.7 - 72 hp (022-EB) of 1973
- 914-4 1.8 - 85 hp (021-AN) from 1974 to 1976
- 914-4 1.8 - 76 hp (022-EC) from 1974 to 1976
- 914-4 2.0 - 95 hp (039-GA) from 1973 to 1974
- 914-4 2.0 - 100 hp (039-GB) from 1973 to 1976
- 914-4 2.0 - 88 hp (039-GC) from 1975 to 1976

Quantity required per vehicle: 1

Gearshift bushing for Volkswagen Polo 5
For VW Polo V (6R) all models with manual gearbox
This shifter bushing is positioned under the shifter for precise guidance of the shifter on its axes.

VAICO right-hand gearshift cable for Volkswagen Polo 5
For VW Polo V (6R) up to 05/2014 with 5-speed manual gearbox MQ250 (Factory code 0EJ)Right side (passenger)
Original quality

VAICO left-hand gearshift cable for Volkswagen Polo 5
For VW Polo V (6R) up to 05/2014 with 5-speed manual gearbox MQ250 (Factory code 0EJ)Left side (driver)
Original quality

Gearbox linkage repair silent-blocks are components used to reduce vibration and noise in your Transporter's gearbox control system. The gearbox linkage is a set of rods and mechanisms which connect the gearshift to the internal mechanism of the gearbox. Silent-blocs are positioned on these fixing or linking points to absorb the vibrations generated when shifting gears, for greater comfort and smoothness.When these silent-blocs are worn or damaged, this can lead to excessive noise, vibration at the shifter or difficulty shifting gears. Replacing these silent-blocs is therefore essential to maintain drivetrain performance and ride quality.In short, these silent-blocs play an important role in ensuring more precise and quieter gearbox control.
These manual gearbox linkage repairsilent-blocs are suitable for VW Transporter T4 from 09/1990 to 07/2003.- All versions and engines.

Shifter sleeve for VW Polo 6N and Lupo
For VW Polo 6N up to 1997 (Chassis N°6N-VW051 773)
Original Volkswagen part

Gearshift cable stop for Audi A3 (8P)
For Audi A3 (8P) all models
For left or right cableSold individually

This sleeve is located after the RS11924 shift lever linkage cover. It is suitable for Porsche 914 produced between 1970 and 1972 :

- 914-4 1.7 - 80 hp (022-W) from 1970 to 1972
- 914-4 1.7 - 80 hp (022-EA) of 1972
- 914-4 1.7 - 72 hp (022-EB) of 1972
- 914-6 2.0 - 110 hp (901.36/37/38/39) from 1970 to 1972

Quantity required per vehicle : 1

This speed selection shaft rubber boot was installed from the 1973 productions. It is suitable for Porsche 914-4 :

- 914-4 1.7 - 80 hp (022-W) of 1973
- 914-4 1.7 - 80 hp (022-EA) of 1973
- 914-4 1.7 - 72 hp (022-EB) of 1973
- 914-4 1.8 - 85 hp (021-AN) from 1974 to 1976
- 914-4 1.8 - 76 hp (022-EC) from 1974 to 1976
- 914-4 2.0 - 95 hp (039-GA) from 1973 to 1974
- 914-4 2.0 - 100 hp (039-GB) from 1973 to 1976
- 914-4 2.0 - 88 hp (039-GC) from 1975 to 1976

Quantity required per vehicle: 1

This speed selection shaft rubber bellows is suitable for Porsche 914-4 produced from 1973 :

- 914-4 1.7 - 80 hp (022-W) of 1973
- 914-4 1.7 - 80 hp (022-EA) of 1973
- 914-4 1.7 - 72 hp (022-EB) of 1973
- 914-4 1.8 - 85 hp (021-AN) from 1974 to 1976
- 914-4 1.8 - 76 hp (022-EC) from 1974 to 1976
- 914-4 2.0 - 95 hp (039-GA) from 1973 to 1974
- 914-4 2.0 - 100 hp (039-GB) from 1973 to 1976
- 914-4 2.0 - 88 hp (039-GC) from 1975 to 1976

Quantity required per vehicle: 1

Gearshift shaft sleeve located at the output of the linkage cover case for the Porsche 914 produced between 1970 and 1972 :

- 914-4 1.7 - 80 hp (022-W) from 1970 to 1972
- 914-4 1.7 - 80 hp (022-EA) of 1972
- 914-4 1.7 - 72 hp (022-EB) of 1972
- 914-6 2.0 - 110 hp (901.36/37/38/39) from 1970 to 1972

Quantity required per vehicle : 1

Gearshift linkage carter for Porsche 914 produced until 1972 :

- 914-4 1.7 - 80 hp (022-W) from 1970 to 1972
- 914-4 1.7 - 80 hp (022-EA) of 1972
- 914-4 1.7 - 72 hp (022-EB) of 1972
- 914-6 2.0 - 110 hp (901.36/37/38/39) from 1970 to 1972

Quantity required per vehicle: 1

These shift lever mounting rings for 2cv (02/1970-07/1990) - Nylon are original accurate.

Theseshift lever rings for 2CV are essential for mounting the shift lever.