Gearbox linkage

Gearbox linkage outer bellows for Porsche 911 and 912 from 1965 to 1971 :

-> Porsche 912 :
- 912 1.6 from 1965 to 1969

-> Porsche 911 :
- 911 2.0 from 1965 to 1968
- 911 2.0 T / L / E / S from 1967 to 1969
- 911 2.2 T / E / S from 1970 to 1971

This speed selection shaft rubber boot was installed from the 1973 productions. It is suitable for Porsche 914-4 :

- 914-4 1.7 - 80 hp (022-W) of 1973
- 914-4 1.7 - 80 hp (022-EA) of 1973
- 914-4 1.7 - 72 hp (022-EB) of 1973
- 914-4 1.8 - 85 hp (021-AN) from 1974 to 1976
- 914-4 1.8 - 76 hp (022-EC) from 1974 to 1976
- 914-4 2.0 - 95 hp (039-GA) from 1973 to 1974
- 914-4 2.0 - 100 hp (039-GB) from 1973 to 1976
- 914-4 2.0 - 88 hp (039-GC) from 1975 to 1976

Quantity required per vehicle: 1

This speed selection shaft rubber bellows is suitable for Porsche 914-4 produced from 1973 :

- 914-4 1.7 - 80 hp (022-W) of 1973
- 914-4 1.7 - 80 hp (022-EA) of 1973
- 914-4 1.7 - 72 hp (022-EB) of 1973
- 914-4 1.8 - 85 hp (021-AN) from 1974 to 1976
- 914-4 1.8 - 76 hp (022-EC) from 1974 to 1976
- 914-4 2.0 - 95 hp (039-GA) from 1973 to 1974
- 914-4 2.0 - 100 hp (039-GB) from 1973 to 1976
- 914-4 2.0 - 88 hp (039-GC) from 1975 to 1976

Quantity required per vehicle: 1

Gearbox rod cover for Volkswagen Golf 1
For VW Golf 1 all sedan and convertible models
White plastic cover for underbody gearbox bellows

This pin slip ring or bushing allows the shift of the gear selector shaft to slide. They are located on the Porsche 914 gearboxes produced between 1970 and 1972 :

- 914-4 1.7 - 80 hp (022-W) from 1970 to 1972
- 914-4 1.7 - 80 hp (022-EA) of 1972
- 914-4 1.7 - 72 hp (022-EB) of 1972
- 914-6 2.0 - 110 hp (901.36/37/38/39) from 1970 to 1972

Quantity required per vehicle: 3

Gear selection fork shaft ring for Porsche 914 produced from 1973 :

- 914-4 1.7 - 80 hp (022-W) of 1973
- 914-4 1.7 - 80 hp (022-EA) of 1973
- 914-4 1.7 - 72 hp (022-EB) of 1973
- 914-4 1.8 - 85 hp (021-AN) from 1974 to 1976
- 914-4 1.8 - 76 hp (022-EC) from 1974 to 1976
- 914-4 2.0 - 95 hp (039-GA) from 1973 to 1974
- 914-4 2.0 - 100 hp (039-GB) from 1973 to 1976
- 914-4 2.0 - 88 hp (039-GC) from 1975 to 1976

Quantity required per vehicle: 1

Gearbox selection shaft ball joint casing for Porsche 914-4 produced from 1973 :

- 914-4 1.7 - 80 hp (022-W) of 1973
- 914-4 1.7 - 80 hp (022-EA) of 1973
- 914-4 1.7 - 72 hp (022-EB) of 1973
- 914-4 1.8 - 85 hp (021-AN) from 1974 to 1976
- 914-4 1.8 - 76 hp (022-EC) from 1974 to 1976
- 914-4 2.0 - 95 hp (039-GA) from 1973 to 1974
- 914-4 2.0 - 100 hp (039-GB) from 1973 to 1976
- 914-4 2.0 - 88 hp (039-GC) from 1975 to 1976

Quantity required per vehicle: 1

Socket located at the rear of the selector box,

For VW Polo (6N1) with cable box control from chassis 6N-V-000001:
- 1.0 50hp (AER, ALL)
- 1.1 45hp (AEV)
- 1.3 54hp (ADX)
- 1.4 54hp (ANX)
- 1.4 60hp (AEX, AKV, APQ)
- 1.4 101hp (AFH)
- 1.6 75hp (AEA, AEE, AHS)
- 1.6 GTi 120hp (AJV)
- 1.7 SDi 60hp (AKU)
- 1.9 SDi 64hp (AEF, AGD)

Gearshift lever for gearshift,

For VW Golf 5 with code PR:0EN
- All models with cable shift and manual gearbox

Only suited to all Golf 4 Saloon and Variant models that have linkage-controlled gearboxes (not suitable for Cabriolets or for cable-controlled gearboxes)

Gear selector lever on gearbox linkage for VW Transporter T25 / T3 from 05/1979 to 12/1982:
- All engines (except CT) up to chassis n°24-C-200000
- 1.6 Petrol type CT up to chassis n°24-D-051580

Gearshift lever for Volkswagen Scirocco 3
For VW Scirocco 3 with code PR:0EN- All models with cable shift and manual gearbox

Gearbox linkage silentblock from the Impergom brand forFiat 500 N, D, F, L and R (1957- 1975)
This link has a rubber silent block in the center to dampen vibrations. It makes the connection between the linkage and the gearbox.
For the models listed below:- Fiat 500 N of 1957 to 1960- Fiat 500 D from 1960 to 1965- Fiat 500 F from 1965 to 1968- Fiat 500 L from 1968 to 1972 p>- Fiat 500 R from 1972 to 1975

Rear part of gearbox control linkage.
Shift rail before gearbox nose. Original VW quality.

For Transporter T25/T3, 08/1982 ->07/1992:
Petrol engines since chassis no. 24-D-000 001->

Front part of 5-speed gearbox control linkage.
Shift rail under the gear lever. Original VW quality.

For Transporter T25/T3, 08/1982 ->07/1992:
Petrol, Diesel engines & Turbo-Diesel, 5-speed gearboxes
since chassis no. 24-D-000 001->
Except for Syncro version (4 x 4).

Rear bearing pivot on linkage fork axle for VW Transporter T25 from 05/1979 to 07/1982.

Main gearshift rod for Volkswagen Transporter T4
For VW T4 with manual gearbox Not suitable for TDI and VR6
Genuine Volkswagen part

Fork pivot pin for VW Transporter T25 from 05/1979 to 07/1992

Complete gearshift lever for Volkswagen Polo 5
For VW Polo V (6R) all models with manual gearbox type MQ250 ( Code PR boîte 0EJ)
Knob and gaiter not included

For Golf 2 1.6 and 1.8 engines with manual gearbox
(Not for G60 with cable system)