Transmission coupling

Located between the gearbox outlet and the drive shaft,

For E90 LCI & E91 LCI:
- 316 d N47 (E90 only)
- 316 d N47N
- 316 i N45N (E90 automatic transmission only)
- 316 i N43 (automatic transmission only)
- 318 d N47 & N47N
- 318 i N43 & N46N (automatic transmission only)
- 320 d N47 & N47N (automatic transmission only)
- 320 i N43 & N46N (automatic transmission only)
- 323 i N52N
- 325 i N52N & N53
- 328 i N51 (E90 only)
- 330 i N52N & N53

For E92 LCI & E93 LCI:
- 320 d N47N (automatic transmission only)
- 320 i N43 & N46N (automatic transmission only)
- 323 i N52N
- 325 i N52N & N53
- 328 i N51 (E93 only)
- 330 i N52N & N53

Flector transmission for Mercedes pagode 250SL and 280SL W113
Driveshaft Silentblock
With time and wear, rubbers dry out and crack, so it's important to have a flector in good condition to avoid damaging or even breaking your transmission.
Assignments :- Mercedes 250 SL 113.043 12/1966 to 01/1968 6 cylinders 2.5L 150hp (M 129.982) Cabriolet - Mercedes 280 SL 113.044 01/1968 to 03/1971 6 cylinders 2.8L 170hp (M 130.983) Cabriolet

FEBI transmission selector for Bmw X5 :


Bmw X5 E70 : - 3.0D 6cyl 235hp from 09/2009 to 03/2010 (engine code m57d30n2)
- 3.0SD 6cyl 286hp from 01/2007 to 03/2010 (engine code m57d30n2 Bi-Turbo)
- 3.5D USA 6cyl 286hp from 01/2008 to 03/2010 (engine code m57d30n2)
- 4.8i 8cyl 355hp from 09/2009 to 03/2010 (engine code N62N)
- X5 M 8cyl 555hp from 07/2008 to 06/2013 (engine code s63) Bmw X5 E70 Lci : - 30XD 6cyl 245hp from 07/2009 to 06/2013 (engine code n57d30) only with option S233A increased load.
- 35XD USA 6cyl 245hp from 08/2009 to 06/2013 (engine code m57d30n2)
- 35IX 6cyl 306hp from 04/2009 to 06/2013 (engine code n55 Turbo) only with option S233A increased load.
- 40XD 6cyl 306hp from 04/2009 to 06/2013 (engine code n57d30 Bi-Turbo)
- 40IX 6cyl 306hp from 01/2012 to 06/2013 (engine code n55 Turbo) only with option S233A increased load.
- 50iX 8cyl 408hp from 04/2009 to 06/2013 (engine code n63)
- M50D 6cyl 381hp from 08/2011 to 06/2013 (n57d30 Three Turbo)

Transmission Selector for Mercedes E-Class

Mounted on the rear of the driveshaft
For Mercedes E-Class W124 listed below:

Mercedes W124 sedan:
- 200 (124.020) from 01/1985 to 06/1990 with ASD
- 200 D (124.120) from 01/1985 to 07/1993 with ASD
- 200 E (124.021) from 07/1985 to 07/1993 with ASD
- E 200 (124.019) from 07/1993 to 08/1995
- E 200 D (124.120) from 07/1993 to 08/1995
- 220 E (124.022) from 09/1992 to 07/1993
- E 220 (124.022) from 07/1993 to 06/1996
- 230 E (124.023) from 01/1985 to 10/1992
- 250 D (124.125) from 05/1985 to 07/1993 with ASD
- 250 D Turbo (124.128) from 08/1988 to 07/1993
- E 250 D (124.126) from 07/1993 to 06/1996
- E 250 TurboDiesel (124.128) from 07/1993 to 06/1995
- 260 E (124.026) from 09/1985 to 10/1992
- 260 E 4-Matic (124.226) from 09/1989 to 06/1991
- 300 D (124.130) from 01/1985 to 07/1993
- 300 D 4-Matic (124.330) from 03/1987 to 06/1991
- 300 E (124.030) from 04/1985 to 11/1992
- 300 E 4-Matic (124.230) from 07/1987 to 07/1993
- E 300 4-Matic (124.230) from 07/1993 to 04/1995
- E 300 D (124.131) from 07/1993 to 08/1995

Mercedes S124 Break:
- 200 T (124.080) from 11/1985 to 05/1990 with ASD and from chassis N°F093373
- 200 T D (124.180) from 11/1985 to 08/1989 with ASD and from chassis N°F093373
- 200 T D (124.180) from 09/1989 to 06/1991
- 200 TE (124.081) from 10/1988 to 08/1989 with ASD and from chassis N°F093373
- 200 TE (124.081) from 09/1989 to 10/1992 with ASD
- 200 TE (124.079) from 09/1992 to 07/1993
- E 200 Break (124.079) from 07/1993 to 02/1996
- 220 TE (124.082) from 09/1992 to 07/1993
- E 220 Break (124.082) from 08/1993 to 02/1996
- 230 TE (124.083) from 01/1985 to 10/1992
- 250 T D (124.185) from 10/1985 to 08/1989 with ASD and from chassis N°F093373
- 250 T D (124.185) from 10/1985 to 08/1989 without ASD and from chassis N°F204958
- 250 T D (124.185) from 09/1989 to 07/1993
- 250 T D Turbo (124.188) from 06/1990 to 07/1993
- E 250 D Break (124.186) from 07/1993 to 02/1996
- E 250 Break TurboDiesel (124.188) from 07/1993 to 01/1996
- 300 T D (124.190) from 08/1986 to 08/1993
- 300 TE (124.090) from 11/1985 to 10/1992
- 300 TE 4-Matic (124.290) from 04/1987 to 07/1993
- E 300 Break 4-Matic (124.290) from 07/1993 to 04/1995
- E 300 D Break (124.191) from 07/1993 to 02/1996

Mercedes C124 Coupe:
- 200 CE-16 (124.040) from 06/1990 to 12/1992
- 200 CE (124.040) from 09/1992 to 07/1993
- E 200 Coupe (124.040) from 07/1993 to 03/1996
- 220 CE (124.042) from 09/1992 to 07/1993
- E 220 Coupe (124.042) from 07/1993 to 03/1996
- 230 CE (124.043) from 04/1987 to 09/1992
- 300 CE (124.050) from 07/1987 to 10/1992

Mercedes A124 Cabriolet:
- E 200 Cabriolet (124.060) from 07/1993 to 07/1997
- E 220 Cabriolet (124.062) from 06/1993 to 07/1997

Interax 90mm
Outer diameter 129mm
Inner diameter 41mm
Thickness 24mm
Mounting: Rear

Transmission reflector sold complete with mounting kit
OEM quality

Reinforced 132mm MEYLE HD transmissionselector, located between gearbox output and driveshaft, for BMW 5 Series E60, E60LCI Sedan and E61, E61LCI Touring with manual and automatic gearbox:

E60 Sedan :
- 520i 2.2L 170hp from 02/2002 to 02/2005 (engine code M54B22)
- 523i 2.5L 177hp from 07/2004 to 02/2007 (engine code N52B25)
- 525i 192hp from 01/2002 to 02/2007 (engine code M54B25)
- 525i 218hp from 07/2004 to 02/2007 (engine code N52B25OL)
- 530i 231hp from 12/2001 to 02/2005 (engine code M54B30)
- 530i 258hp from 07/2004 to 02/2007 (engine code N52B30)
- 520d 4cyl 163hp from 02/2005 to 02/2007 (engine code M47D20TU2)

E60LCI Sedan :
- 520i 170hp from 04/2006 to 12/2009 (engine code N43B20O1) --> automatic gearbox only
- 523i 2.5L 177hp from 11/2005 to 12/2009 (engine code N52B25TU)
- 523i 2.5L 190hp from 11/2005 to 12/2009 (engine code N53B25)
- 525i 218hp from 09/2006 to 12/2009 (engine code N52B25OL)
- 525i 3.0L 218hp from 11/2005 to 12/2009 (engine code N53B30UL)
- 530i 272hp from 11/2005 to 12/2009 (engine code N53B30OL)
- 520d 4cyl 177hp from 11/2006 to 02/2008 (engine code M47D20TU2)
- 520d 4cyl 177hp from 04/2006 to 12/2009 (engine code N47D20)

E61 Touring :
- 523i 2.5L 177hp from 10/2004 to 02/2007 (engine code N52B25)
- 525i 192hp from 10/2002 to 02/2005 (engine code M54B25)
- 525i 218hp from 07/2004 to 02/2007 (engine code N52B25)
- 530i 258hp from 07/2004 to 02/2007 (engine code N52B30)
- 520d 4cyl 163hp from 04/2005 to 02/2007 (engine code M47D20TU2)

E61LCI Touring :
- 520i 170hp from 04/2006 to 05/2010 (engine code N43B20O1) --> automatic gearbox only
- 523i 2.5L 190hp from 11/2005 to 05/2010 (engine code N53B25)
- 525i 218hp from 12/2005 to 03/2010 (engine code N52B25)
- 525i 3.0L 218hp from 11/2005 to 05/2010 (engine code N53B30)
- 530i 258hp from 11/2005 to 03/2010 (engine code N52B30)
- 530i 272hp from 11/2005 to 04/2010 (engine code N53B30)
- 520d 4cyl 177hp from 05/2006 to 02/2008 (engine code M47D20TU2)
- 520d 4cyl 177hp from 04/2006 to 05/2010 (engine code N47D20)

Screws and bolts included.

Dimensions :
- Mounting centers: 96mm (6 holes)
- Outside diameter: 132mm
- Thickness: 32mm

This bearing offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding.

For E21 with manual gearbox up to 09/80
- 316M10
- 318 M10
- 318i M10
- 320 M10 up to 07/79
- 320i M10
-320M20
- 323i M20

For E21 with automatic gearbox:
- 318 M10 (Important: 2 possible assemblies, the other with 6 holes, 110 mm)
- 320M10 (Important: 2 possible assemblies, the other with 6 holes, 110mm)

Flector Transmission for Bmw 7 Series E38 :

Bmw 7 Series E38 :

- 730D 6 cyl 193hp from 12/1997 to 07/2001 (engine code m57d30)
- 740D 8cyl 245hp from 07/1998 to 07/2001 (engine code m67 bi-turbo)

WARNING: Not suitable for Bmw 7 Series E38 725tds engine code m51d25.

FEBI BILSTEIN transmission selector for Mercedes SLK

For Mercedes SLK R170 :
- SLK 200 Kompressor (170.445) from 09/1996 to 01/2000 from chassis N°F094037 (rear only)
- SLK 200 Kompressor (170.444) from 02/2000 to 12/2004 (front and rear)
- SLK 230 Kompressor (170.447) from 09/1996 to 01/2000 from chassis N°F094037 (rear only)
- SLK 230 Kompressor (170.449) from 02/2000 to 12/2004 (front and rear)
- SLK 320 (170.465) from 02/2000 to 12/2004 (front and rear)

Manual and automatic transmissions
Sold individually
Mounting kit included

Centre distance 6x100mm
Outside diameter 140mm
Mounting: Front and/or rear depending on model

German quality FEBI BILSTEIN

FEBI brand superior quality drive shaft flector for BMW series 3 E46 Sedan and Touring 4 wheel drive from 1999 to 2005:

- 325xi M54
- 330xi M54
- 330xd M57 and M57N

This flector is also compatible with the rear transmission shaft for BMW X5 E53 from 2000 to 2006 :

- 3.0d M57N
- 3.0i M54
- 4.4i N62
- 4.8is N62

External diameter = 120mm
Drill circle diameter (center distance) = 96mm
Internal diameter = 50mm
Number of holes = 6
Thickness = 27.5mm

Sold individually.

Transmission Selector for Mercedes E-Class

Mounted on the rear of the driveshaft
For Mercedes E-Class W124 listed below:

Mercedes W124 sedan:
- 200 (124.020) from 01/1985 to 06/1990 without ASD
- 200 (124.020) from 01/1985 to 06/1990 with ASD and up to chassis N°A887155
- 200 D (124.120) from 01/1985 to 07/1993 without ASD and up to chassis N°B644866, then from chassis N°B655393 up to N°B938072
- 200 D (124.120) from 01/1985 to 07/1993 with ASD and up to chassis N°A887155
- 200 E (124.021) from 07/1985 to 07/1993 without ASD and up to chassis N°B644866, then from chassis N°B655393 to N°B938072
- 200 E (124.021) from 07/1985 to 07/1993 with ASD and up to chassis N°A887155
- 250 D (124.125) from 05/1985 to 07/1993 without ASD and up to chassis N°B644866, then from chassis N°B655393 up to N°B938072
- 250 D (124.125) from 05/1985 to 07/1993 with ASD and up to chassis N°A887155

Mercedes S124 Break:
- 200 T (124.080) from 11/1985 to 05/1990 without ASD
- 200 T (124.080) from 11/1985 to 05/1990 with ASD and until chassis N°F093372
- 200 T D (124.180) from 11/1985 to 08/1989 without ASD and up to chassis N°F204957
- 200 T D (124.180) from 11/1985 to 08/1989 with ASD and up to chassis N°F093372
- 200 TE (124.081) from 10/1988 to 08/1989 with ASD and up to chassis N°F093372
- 200 TE (124.081) from 10/1988 to 07/1993 without ASD and up to chassis N°F204957 then from chassis N°F207840 to N°F253126
- 250 T D (124.185) from 10/1985 to 07/1993 without ASD and up to chassis N°F204957 then from chassis N°F207840 up to N°F253126

Axis 80mm
Outside diameter 115mm
Inside diameter 41mm
Thickness 20,5mm
Mounting: Rear

Transmission selector sold complete with mounting kit
OEM quality

Located at the front of the drive shaft, MEYLE Original Quality,

For Saloon:
- 1502
- 1600 ti
- 1602
- 1802
- 2002, 2002 ti, 2002 tii
- 2002 Turbo

For Touring:
- 1602
- 1802
- 2000
- 2000 tii
- 2002, 2002 tii

For Convertible:
- 1600
- 2002

Check your flex disc, as there are several different fitments

Transmission selector for Mercedes 190

For Mercedes 190 C-Class W201 listed below:
- 190 (201.023) from 09/1988 to 01/1991 From chassis No. A495251 or F616785
- 190 D (201.122) from 07/1988 to 08/1989 Manual transmission From chassis No. A495251 or F616785
- 190 D (201.122) from 07/1988 to 08/1989 Automatic transmission From chassis N°A495251 or F616915
- 190 D 2.5 (201.126) from 07/1988 to 08/1993 From chassis N°A495251 or F616831
- 190 D 2.5 turbo (201.128) from 02/1986 to 09/1988
- 190 D 2.5 turbo (201.128) from 09/1988 to 05/1989 Automatic gearbox
- 190 E 2.0 (201.024) from 02/1991 to 08/1993 Manual gearbox until chassis N°A615730 or F821791
- 190 E 2.0 (201.024) from 02/1991 to 08/1993 Automatic transmission from chassis N°A495251 to A615730 or N°F616732 to F821791
- 190 E 2.3 (201.028) from 09/1983 to 08/1988
- 190 E 2.3 (201.028) from 09/1988 to 08/1993 Manual transmission up to chassis No. A522463 or F656149
- 190 E 2.3 (201.028) from 07/1988 to 08/1993 Automatic transmission
- 190 E 2.6 (201.029) from 10/1984 to 08/1988
- 190 E 2.6 (201.029) from 09/1988 to 06/1992 Manual transmission until chassis N°A507990
- 190 E 2.6 (201.029) from 09/1988 to 06/1992 Automatic transmission

Front driveshaft mounting
Outer diameter 132mm
Inner diameter 37mm
Thickness 24mm

Transmission selector sold complete with mounting kit
OEM quality

E39 :
- 520 D, 525 D manual box
- 530 D manual box 01/99->

FEBI brand top quality front drive shaft flector for BMW X5 E53 4WD from 2000 to 2006 :

- 3.0d M57N
- 3.0i M54
- 4.4i M62 and N62
- 4.6is M62
- 4.8is N62

External diameter = 110mm
Hole circle diameter (center distance) = 78mm
Number of holes = 6
Thickness = 35mm

Sold individually.

For the rear drive shaft flector you must order the reference BS40122.

MEYLE HD reinforced transmission selector for Bmw 6 Series:

Bmw E63 :

- 645ci 8 cyl 333hp from 03/2005 to 08/2005 automatic gearbox (engine code n62b44a)

Bmw E64 :

- 645ci 8 cyl 333hp from 03/2005 to 08/2005 automatic gearbox (engine code n62b44a)

Caution! For compatible manual gearboxes only from 04/2005 to 08/2005.

Screws and bolts included.

This bearing offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding.

RIdex transmissionselector for Bmw z3:
Bmw z3 E36 :
- 1.9 16V 4cyl 140hp phase 1 from 04/1995 to 04/1999 (engine code M44B19) --> automatic gearbox

MEYLE HD range 140mm transmission selector , located between gearbox output and driveshaft, for BMW 5 series E60, E60LCI Sedan and E61, E61LCI Touring:

E60 Sedan :
- 540i V8 306hp from 02/2005 to 02/2007 (engine code N62B40TU) --> automatic gearbox only
- 550i V8 4.8L 367hp from 02/2005 to 02/2007 (engine code N62B48TU) --> automatic gearbox only

E60LCI Sedan :
- 540i V8 306hp from 11/2005 to 12/2009 (engine code N62B40TU) --> automatic gearbox only
- 550i V8 4.8L 367hp from 11/2005 to 12/2009 (engine code N62B48TU) --> automatic gearbox only
- 520d 4cyl 177hp from 04/2006 to 12/2009 (engine code N47D20) --> manual and automatic gearboxes

E61 Touring :
- 550i V8 4.8L 367hp from 02/2005 to 02/2007 (engine code N62B48) --> automatic gearbox only

E61LCI Touring :
- 550i V8 4.8L 367hp from 11/2005 to 03/2010 (engine code N62B48) --> automatic gearbox only
- 520d 4cyl 177hp from 04/2006 to 05/2010 (engine code N47D20) --> manual and automatic gearboxes

Screws and bolts included.

Dimensions :
- Mounting centres: 105mm (6 holes)
- Outside diameter: 140mm
- Inside diameter: 54mm
- Thickness: 41mm

This bearing offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding.

Transmission Selector for Mercedes E-Class

Front drive shaft mounting
For Mercedes E-Class W124 listed below:

Mercedes W124 sedan:
- 200 D (124.120) from 01/1985 to 08/1989 Manual transmission and up to chassis No. A982463
- 200 E (124.021) from 07/1985 to 08/1989 Up to chassis No. A982463
- 250 D (124.125) from 05/1985 to 08/1989 Up to chassis No. A982463

Mercedes W124 Estate:
- 200 T (124.080) from 11/1985 to 08/1989 Up to chassis N°F107874
- 200 T D (124.180) from 11/1985 to 08/1989 Manual transmission and up to chassis N°F107874
- 200 TE (124.081) from 10/1988 to 08/1989 Up to chassis N°F107874
- 250 T D (124.185) from 10/1985 to 08/1989 Up to chassis N°F107874

Axis 80mm
Outer diameter 128mm
Inner diameter 34mm
Thickness 20,5mm
Mounting: Front

Transmission selector sold complete with mounting kit
OEM quality

Transmission Flector for Mercedes E-Class

Front driveshaft mounting
For Mercedes E-Class W124 listed below:

Mercedes W124 saloon:
- 200 D (124.120) from 01/1985 to 08/1989 From chassis N°A982464
- 200 D (124.120) from 09/1989 to 07/1993
- E 200 D (124.120) from 07/1993 to 08/1995
- 200 E (124.021) from 07/1985 to 08/1989 From chassis N°A982464
- 200 E (124.021) from 09/1989 to 09/1992
- E 200 (124.019) from 07/1993 to 08/1995 Manual gearbox without A/C
- E 200 (124.019) from 07/1993 to 08/1995 Automatic gearbox
- 220 E (124.022) from 09/1992 to 10/1992 Automatic gearbox
- E 220 (124.022) from 07/1993 to 06/1996 Automatic gearbox
- 230 E (124.023) from 01/1985 to 08/1989
- 230 E (124.023) from 09/1989 to 10/1992 Automatic gearbox
- 250 D (124.125) from 05/1985 to 08/1989 From chassis N°A982464
- 250 D (124.125) from 09/1989 to 07/1993
- E 250 D (124.126) from 07/1993 to 06/1996
- 250 D Turbo (124.128) from 08/1988 to 08/1989
- 250 D Turbo (124.128) from 09/1989 to 07/1993 Automatic transmission
- E 250 TurboDiesel (124.128) from 07/1993 to 01/1996 Automatic gearbox
- 260 E (124.026) from 09/1985 to 08/1989
- 260 E (124.026) from 09/1989 to 10/1992 Automatic gearbox up to chassis N°B540393
- 260 E 4-Matic (124.226) from 04/1987 to 08/1989
- 300 D (124.130) from 01/1985 to 07/1993
- 300 D 4-Matic (124.330) from 03/1987 to 06/1991
- 300 E (124.030) from 04/1985 to 08/1989
- 300 E (124.030) from 09/1989 to 11/1992 Automatic transmission and up to chassis N°F204957
- E 300 D (124.131) from 07/1993 to 08/1995

Mercedes S124 Estate:
- 200 T (124.080) from 11/1985 to 08/1989 From chassis N°F107875
- 200 T D (124.180) from 11/1985 to 08/1989 From chassis N°F107875
- 200 T D (124.180) from 09/1989 to 06/1991
- 200 TE (124.081) from 10/1988 to 08/1989 From chassis N°F107875
- 200 TE (124.081) from 09/1989 to 10/1992
- 200 TE (124.079) from 09/1992 to 07/1993 Manual gearbox without A/C
- 200 TE (124.079) from 09/1992 to 07/1993 Automatic gearbox
- E 200 Estate (124.079) from 07/1993 to 02/1996 Manual gearbox without A/C
- E 200 Estate (124.079) from 07/1993 to 02/1996 Automatic gearbox
- 220 TE (124.082) from 09/1992 to 07/1993 Automatic gearbox
- E 220 Estate (124.082) from 08/1993 to 02/1996 Automatic gearbox
- 230 TE (124.083) from 01/1985 to 08/1989
- 230 TE (124.083) from 09/1989 to 10/1992 Automatic gearbox
- 250 T D (124.185) from 10/1985 to 08/1989 From chassis N°F107875
- 250 T D (124.125) from 09/1989 to 07/1993 Automatic gearbox
- 250 T D Turbo (124.188) from 06/1990 to 07/1993 Automatic gearbox
- E 250 D Estate (124.186) from 07/1993 to 02/1996
- E 250 Break TurboDiesel (124.188) from 07/1993 to 01/1996 Automatic gearbox
- 300 T D (124.190) from 08/1986 to 08/1993
- E 300 D Estate (124.191) from 07/1993 to 02/1996
- 300 TE (124.090) from 11/1985 to 08/1989
- 300 TE (124.090) from 09/1989 to 10/1992 Automatic transmission and up to chassis N°F143372
- 300 TE 4-Matic (124.290) from 04/1987 to 08/1989

Mercedes C124 Coupé:
- 200 CE-16 (124.040) from 06/1990 to 12/1992 Manual gearbox without A/C
- 200 CE-16 (124.040) from 06/1990 to 12/1992 Automatic gearbox
- 200 CE (124.040) from 09/1992 to 07/1993 Manual gearbox without A/C
- 200 CE (124.040) from 09/1992 to 07/1993 Automatic gearbox
- E 200 Coupé (124.040) from 07/1993 to 03/1996 Manual gearbox without air conditioning
- E 200 Coupé (124.040) from 07/1993 to 03/1996 Automatic gearbox
- 220 CE (124.042) from 09/1992 to 07/1993 Automatic gearbox
- E 220 Coupé (124.042) from 07/1993 to 03/1996 Automatic gearbox
- 230 CE (124.043) from 04/1987 to 08/1989
- 230 CE (124.043) from 09/1989 to 09/1992 Automatic gearbox
- 300 CE (124.050) from 07/1987 to 08/1989
- 300 CE (124.050) from 09/1989 to 10/1992 Automatic transmission and up to chassis N°B233929

Mercedes A124 Cabriolet :
- 200 CE (124.060) from 09/1989 to 07/1993 Manual gearbox without air conditioning
- 200 CE (124.060) from 09/1989 to 07/1993 Automatic gearbox
- E 200 Cabriolet (124.060) from 07/1993 to 03/1996 Manual gearbox without air conditioning
- E 200 Cabriolet (124.060) from 07/1993 to 03/1996 Automatic transmission
- E220 Cabriolet (124.062) from 06/1993 to 07/1997 Automatic gearbox

Center distance 90mm
Outside diameter 132mm
Inner diameter 37mm
Thickness 24mm
Mounting: Front

Flector transmission sold complete with mounting kit
Original equipment quality

MEYLE HD range 110mm reinforced transmission selector, located between gearbox output and driveshaft , for BMW 1 Series E81 3-door Saloon, E87, E87LCi 5-door Saloon, E82 Coupé and E88 Cabriolet with manual gearbox only:

E81 3-door sedan :
- 116i 115hp from 04/2007 to 12/2011 (engine code N45B16)
- 116i 122hp from 03/2007 to 11/2011 (engine code N43B16)
- 116i 2.0L 122hp from 11/2008 to 11/2011 (engine code N43B20)
- 118i 2.0L 129hp from 09/2006 to 12/2011 (engine code N46B20)
- 118i 2.0L 143hp from 02/2006 to 12/2011 (engine code N43B20)
- 120i 150hp from 09/2006 to 10/2011 (engine code N46B20)
- 120i 170hp from 09/2006 to 12/2011 (engine code N43B20)

E87 5-door sedan :
- 116i 115hp from 03/2003 to 02/2007 (engine code N45B16)
- 118i 2.0L 129hp from 07/2004 to 02/2007 (engine code N46B20)
- 120i 150hp from 03/2003 to 02/2007 (engine code N46B20)

E87LCI 5-door sedan :
- 116i 115hp from 02/2006 to 06/2011 (engine code N45B16)
- 116i 122hp from 03/2007 to 06/2011 (engine code N43B16)
- 116i 2.0L 122hp from 10/2008 to 06/2011 (engine code N43B20)
- 118i 2.0L 129hp from 10/2006 to 06/2011 (engine code N46B20)
- 118i 2.0L 143hp from 02/2006 to 06/2011 (engine code N43B20)
- 120i 150hp from 09/2006 to 06/2011 (engine code N46B20)
- 120i 170hp from 02/2006 to 06/2011 (engine code N43B20)

E82 Coupé :
- 120i 150hp from 06/2009 to 10/2013 (engine code N46B20)
- 120i 170hp from 06/2009 to 09/2013 (engine code N43B20)

E88 Cabriolet :
- 118i 2.0L 129hp from 03/2008 to 09/2013 (engine code N46B20)
- 118i 2.0L 143hp from 09/2007 to 10/2013 (engine code N43B20)
- 120i 150hp from 11/2006 to 10/2013 (engine code N46B20)
- 120i 170hp from 11/2006 to 10/2013 (engine code N43B20)

ATTENTION: Not suitable for models with automatic gearbox!

Screws and bolts included (6 M10X50-10.9 screws and 6 M10 self-locking hex nuts).

Dimensions:
- Mounting centres: 78mm (6 holes)
- Outside diameter: 110mm
- Inside diameter: 40mm
- Thickness: 28mm

This bearing offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding.