Transmission coupling

FEBI brand superior quality drive shaft flector for BMW series 3 E46 Sedan and Touring 4 wheel drive from 1999 to 2005:

- 325xi M54
- 330xi M54
- 330xd M57 and M57N

This flector is also compatible with the rear transmission shaft for BMW X5 E53 from 2000 to 2006 :

- 3.0d M57N
- 3.0i M54
- 4.4i N62
- 4.8is N62

External diameter = 120mm
Drill circle diameter (center distance) = 96mm
Internal diameter = 50mm
Number of holes = 6
Thickness = 27.5mm

Sold individually.

MEYLE HD range 140mm reinforced transmission selector

Located between the gearbox output and the drive shaft for those in the "front" position, or between the drive shaft and the rear axle for those in the "rear" position
Some models with double flector have the same at front and rear

For E90, E91 and E92 :
- 320 d N47 with manual gearbox (front-rear position)
- 325 d M57N2 with automatic gearbox (front/rear position)
- 330 xd M57N2 since 09/07 with automatic gearbox (rear position)
- 335 d M57N2 (front position)
- 335 i N54 (front position)

For E93 :
- 320 d N47 with manual gearbox (front/rear position)
- 325 d M57N2 with automatic gearbox (front/rear position)
- 335 i N54 (front position)

Screws and bolts included.

Dimensions :
- Mounting centers: 105 mm (6 holes)
- Outside diameter: 140 mm
- Inside diameter: 54 mm
- Thickness: 41 mm

This bearing offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding.

135mm MEYLE HD reinforced version transmission flector for BMW 3 series E46:

Sedan and Touring :
- 316i (engine codes N42, N46) -> automatic gearbox
- 318i (engine codes N42, N46) -> automatic gearbox
- 318d (engine code M47) -> manual gearbox
- 318d (engine code M47N) -> manual and automatic gearboxes
- 320d (engine codes M4, M47N) -> manual gearbox and auto
- 320i (engine codes M52, M54) -> automatic gearbox
- 323i (engine code M52 Saloon only) -> automatic gearbox
- 325i (engine code M54) -> automatic gearbox (and sequential since 09/2001)
- 328i (engine code M52) -> manual gearbox
- 330i (engine code M54) -> manual gearbox

Coupé and Cabriolet :
- 318ci (engine codes N42, N46) -> automatic gearbox
- 320cd (engine code M47N) -> manual gearbox and auto on Coupé and manual only on Cabriolet)
- 320ci (engine code M54) -> automatic gearbox
- 323ci (engine code M52) -> automatic gearbox
- 325ci (engine code M54) -> automatic gearbox (and sequential since 09/2001)
- 328ci (engine code M52) -> manual gearbox
- 330ci (engine code M54) -> manual gearbox

Compact :
- 316ti (engine codes N4, N46) -> automatic gearbox
- 318td (engine code M47N) -> manual gearbox
- 318ti (engine code N42, N46) -> automatic gearbox
- 320td (engine code M47N) -> manual and auto gearboxes
- 325ti (engine code M54) -> automatic gearbox

Screws and bolts included.

Mounting centres: 96 mm (6 holes)
Outside diameter: 135 mm
Inside diameter: 50 mm
Thickness: 30 mm

This reinforced part offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding.

Reinforced 135mm MEYLE HD transmission selector for BMW 3 series E36 Sedan, Touring, Compact, Coupé and Cabriolet :

Sedan :
- 323i 2.5L 170hp from 07/1994 to 05/1998 (engine code M52B25) --> automatic gearbox
- 325i 192hp from 11/1989 to 05/1991 (engine code M50B25) --> manual gearbox
- 325i 192hp from 11/1990 to 08/1992 (engine code M50B25) --> automatic gearbox
- 325i 192hp from 09/1992 to 07/1995 (engine code M50B25TU) --> automatic gearbox
- 325td 115hp from 01/1991 to 02/1998 (engine code M51D25) --> manual gearbox
- 325tds 143hp from 03/1993 to 03/1998 (engine code M51D25) --> manual and automatic gearboxes
- 328i 193hp from 07/1994 to 04/1998 (engine code M52B28) --> manual and automatic gearboxes

Touring :
- 323i 2.5L 170hp from 07/1995 to 05/1999 (engine code M52B25) --> manual and automatic gearboxes
- 328i 193hp from 10/1994 to 05/1999 (engine code M52B28) --> manual and automatic gearboxes
- 325tds 143hp from 10/1994 to 05/1999 (engine code M51D25) --> manual and automatic gearboxes

Compact :
- 323ti 2.5L 170hp from 01/1997 to 08/2000 (engine code M52B25) --> automatic gearbox

Coupé :
- 323i 2.5L 170hp from 07/1994 to 04/1999 (engine code M52B25) --> automatic gearbox
- 325i 192hp from 10/1990 to 08/1992 (engine code M50B25) --> automatic gearbox
- 325i 192hp from 09/1992 to 07/1995 (engine code M50B25TU) --> automatic gearbox
- 328i 193hp from 07/1994 to 04/1999 (engine code M52B28) --> manual and automatic gearboxes

Cabriolet :
- 323i 2.5L 170hp from 03/1995 to 09/1999 (engine code M52B25) --> automatic gearbox
- 325i 192hp from 08/1992 to 07/1995 (engine code M50B25TU) --> automatic gearbox
- 328i 193hp from 07/1994 to 09/1999 (engine code M52B28) --> manual and automatic gearboxes

Screws and bolts included (9 M12X1.5 screws, 6 M12X1.5 self-locking hex nuts and 3 M12 washers).

Dimensions :
- Mounting centers: 96mm
- Outside diameter: 135mm
- Inside diameter: 50mm
- Internal hole diameter: 12mm
- Thickness: 30 mm

This bearing offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding.

E39 :
- 520 D, 525 D manual box
- 530 D manual box 01/99->

MEYLE HD range 110mm reinforced transmission selector for BMW 3 series E21:

- 315 1.6L 75hp from 11/1980 to 12/1983 (engine code M10B16) --> manual gearbox
- 316 1.8L 90hp from 10/1980 to 09/1983 (engine code M10B18) --> manual and automatic gearboxes
- 318 98hp from 03/1975 to 07/1980 (engine code M10B18) --> automatic gearbox
- 318i 105hp from 10/1980 to 12/1983 (engine code M10B18i) --> manual and automatic gearboxes
- 320 4cyl 109hp from 02/1975 to 10/1982 (engine code M10B20) --> automatic gearbox
- 320-6 6cyl 122hp from 09/1980 to 12/1982 (engine code M20B20) --> manual gearbox
- 320-6 6cyl 122hp from 08/1977 to 12/1982 (engine code M20B20) --> automatic gearbox
- 323i 6cyl 143hp from 09/1980 to 10/1982 (engine code M20B23) --> manual gearbox
- 323i 6cyl 143hp from 07/1977 to 10/1982 (engine code M20B23) --> automatic gearbox

ATTENTION: On 318 and 320 4 cyl M10 with automatic gearbox, a 2nd mounting is possible with 8 holes, external diameter 105mm!

Screws and bolts included.

Dimensions :
Mounting centers: 78mm (6 holes)
Outside diameter: 110mm
Inside diameter: 40mm
Thickness: 28mm

This bearing offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding.

Transmission flex disc located between the gearbox and the front of the transmission shaft,

For Audi A3 (8P) Quattro:
- 1.9 TDi 105 hp (BKC, BLS)
- 2.0 TDi 136 hp (AZV)
- 2.0 TDi 140 hp (BMM, BKD)
- 2.0 TDi 170 hp (BMN)
- 2.0 FSi 150 hp (AXW, BLX, BLR, BMB, BLY, BVY, BVZ)
- 2.0 TFSi 200 hp (AXX)

Flector transmission for Peugeot 106 1.0l, 1.1l and 1.4l (09/1991-04/1996)
nuts and bolts supplied
Assignments :1.0, Year of manufacture 09.1991 - 04.1996, 954 ccm, 45 HP1.0, Year of manufacture 09.1991 - 04.1996, 954 ccm, 50 HP1.1, Construction year 09.1991 - 04.1996, 1124 ccm, 60 CH1.4, Year of construction 09.1991 - 04.1996, 1360 ccm, 75 CH1.4 Le Mans, Year of construction 09.1991 - 11.1994, 1361 ccm, 94 CH

MEYLE HD reinforced transmissionselector for Bmw 6 Series:

Bmw E63 :

- 630i 6 cyl 258hp from 02/2004 to 07/2007 (engine code n52b30a)
- 630i 6 cyl 272hp from 04/2006 to 07/2010 (engine code n53b30a)
- 630i 6 cyl 258hp from 05/2006 to 07/2010 (engine code n52b30n)

Bmw E64 :

- 630i 6 cyl 258hp from 03/2004 to 07/2007 (engine code n52b30a)
- 630i 6 cyl 272hp from 04/2006 to 07/2010 (engine code n53b30a)
- 630i 6 cyl 258hp from 05/2006 to 07/2010 (engine code n52b30n)

This bearing offers optimized quality compared to the original, with design flaws corrected and a more solid construction for improved durability and roadholding.

Screws and bolts included.

Flector transmission for Mercedes pagode 250SL and 280SL W113
Driveshaft Silentblock
With time and wear, rubbers dry out and crack, so it's important to have a flector in good condition to avoid damaging or even breaking your transmission.
Assignments :- Mercedes 250 SL 113.043 12/1966 to 01/1968 6 cylinders 2.5L 150hp (M 129.982) Cabriolet - Mercedes 280 SL 113.044 01/1968 to 03/1971 6 cylinders 2.8L 170hp (M 130.983) Cabriolet

Transmission Flector for Mercedes E-Class

Front driveshaft mounting
For Mercedes E-Class W124 listed below:

Mercedes W124 saloon:
- 200 D (124.120) from 01/1985 to 08/1989 From chassis N°A982464
- 200 D (124.120) from 09/1989 to 07/1993
- E 200 D (124.120) from 07/1993 to 08/1995
- 200 E (124.021) from 07/1985 to 08/1989 From chassis N°A982464
- 200 E (124.021) from 09/1989 to 09/1992
- E 200 (124.019) from 07/1993 to 08/1995 Manual gearbox without A/C
- E 200 (124.019) from 07/1993 to 08/1995 Automatic gearbox
- 220 E (124.022) from 09/1992 to 10/1992 Automatic gearbox
- E 220 (124.022) from 07/1993 to 06/1996 Automatic gearbox
- 230 E (124.023) from 01/1985 to 08/1989
- 230 E (124.023) from 09/1989 to 10/1992 Automatic gearbox
- 250 D (124.125) from 05/1985 to 08/1989 From chassis N°A982464
- 250 D (124.125) from 09/1989 to 07/1993
- E 250 D (124.126) from 07/1993 to 06/1996
- 250 D Turbo (124.128) from 08/1988 to 08/1989
- 250 D Turbo (124.128) from 09/1989 to 07/1993 Automatic transmission
- E 250 TurboDiesel (124.128) from 07/1993 to 01/1996 Automatic gearbox
- 260 E (124.026) from 09/1985 to 08/1989
- 260 E (124.026) from 09/1989 to 10/1992 Automatic gearbox up to chassis N°B540393
- 260 E 4-Matic (124.226) from 04/1987 to 08/1989
- 300 D (124.130) from 01/1985 to 07/1993
- 300 D 4-Matic (124.330) from 03/1987 to 06/1991
- 300 E (124.030) from 04/1985 to 08/1989
- 300 E (124.030) from 09/1989 to 11/1992 Automatic transmission and up to chassis N°F204957
- E 300 D (124.131) from 07/1993 to 08/1995

Mercedes S124 Estate:
- 200 T (124.080) from 11/1985 to 08/1989 From chassis N°F107875
- 200 T D (124.180) from 11/1985 to 08/1989 From chassis N°F107875
- 200 T D (124.180) from 09/1989 to 06/1991
- 200 TE (124.081) from 10/1988 to 08/1989 From chassis N°F107875
- 200 TE (124.081) from 09/1989 to 10/1992
- 200 TE (124.079) from 09/1992 to 07/1993 Manual gearbox without A/C
- 200 TE (124.079) from 09/1992 to 07/1993 Automatic gearbox
- E 200 Estate (124.079) from 07/1993 to 02/1996 Manual gearbox without A/C
- E 200 Estate (124.079) from 07/1993 to 02/1996 Automatic gearbox
- 220 TE (124.082) from 09/1992 to 07/1993 Automatic gearbox
- E 220 Estate (124.082) from 08/1993 to 02/1996 Automatic gearbox
- 230 TE (124.083) from 01/1985 to 08/1989
- 230 TE (124.083) from 09/1989 to 10/1992 Automatic gearbox
- 250 T D (124.185) from 10/1985 to 08/1989 From chassis N°F107875
- 250 T D (124.125) from 09/1989 to 07/1993 Automatic gearbox
- 250 T D Turbo (124.188) from 06/1990 to 07/1993 Automatic gearbox
- E 250 D Estate (124.186) from 07/1993 to 02/1996
- E 250 Break TurboDiesel (124.188) from 07/1993 to 01/1996 Automatic gearbox
- 300 T D (124.190) from 08/1986 to 08/1993
- E 300 D Estate (124.191) from 07/1993 to 02/1996
- 300 TE (124.090) from 11/1985 to 08/1989
- 300 TE (124.090) from 09/1989 to 10/1992 Automatic transmission and up to chassis N°F143372
- 300 TE 4-Matic (124.290) from 04/1987 to 08/1989

Mercedes C124 Coupé:
- 200 CE-16 (124.040) from 06/1990 to 12/1992 Manual gearbox without A/C
- 200 CE-16 (124.040) from 06/1990 to 12/1992 Automatic gearbox
- 200 CE (124.040) from 09/1992 to 07/1993 Manual gearbox without A/C
- 200 CE (124.040) from 09/1992 to 07/1993 Automatic gearbox
- E 200 Coupé (124.040) from 07/1993 to 03/1996 Manual gearbox without air conditioning
- E 200 Coupé (124.040) from 07/1993 to 03/1996 Automatic gearbox
- 220 CE (124.042) from 09/1992 to 07/1993 Automatic gearbox
- E 220 Coupé (124.042) from 07/1993 to 03/1996 Automatic gearbox
- 230 CE (124.043) from 04/1987 to 08/1989
- 230 CE (124.043) from 09/1989 to 09/1992 Automatic gearbox
- 300 CE (124.050) from 07/1987 to 08/1989
- 300 CE (124.050) from 09/1989 to 10/1992 Automatic transmission and up to chassis N°B233929

Mercedes A124 Cabriolet :
- 200 CE (124.060) from 09/1989 to 07/1993 Manual gearbox without air conditioning
- 200 CE (124.060) from 09/1989 to 07/1993 Automatic gearbox
- E 200 Cabriolet (124.060) from 07/1993 to 03/1996 Manual gearbox without air conditioning
- E 200 Cabriolet (124.060) from 07/1993 to 03/1996 Automatic transmission
- E220 Cabriolet (124.062) from 06/1993 to 07/1997 Automatic gearbox

Center distance 90mm
Outside diameter 132mm
Inner diameter 37mm
Thickness 24mm
Mounting: Front

Flector transmission sold complete with mounting kit
Original equipment quality

Driveshaft Selector for Mercedes

For Mercedes W114 and W115 listed below
Mercedes W114 Sedan:
- 230.6 (114.015) from 09/1967 to 10/1976
- 250 2.5 (114.010) from 07/1967 to 06/1976

Mercedes W114 Coupe:
- 250 C (114.021) from 10/1968 to 06/1976
- 250 C 2.8 (114.023) from 07/1969 to 08/1972

Mercedes W115 Sedan:
- 200 (115.015) from 10/1967 to 12/1976
- 200 D (115.110) from 10/1967 to 12/1976
- 220 (115.010) from 10/1967 to 07/1973
- 220 D (115.115) from 10/1967 to 12/1976
- 230.4 (115.017) from 08/1973 to 11/1976
- 240 D (115.117) from 08/1973 to 11/1976

Mounts front or rear
Outer diameter: 124mm
Inner diameter: 47mm
Thickness: 21mm
Complete kit with hardware

OEM quality

A worn flector will take up some slack and cause your driveshaft to snap

Ridex transmissionselector for Bmw 3 Series:

Bmw 3 Series E90 Sedan :
- 318i 4cyl 2.0L 129hp from 08/2004 to 08/2008 (engine code N46B20)- 320i 4cyl 150hp from 02/2004 to 09/2008 (engine code N46B20)- 320si 4cyl 173hp from 09/2005 to 08/2006 (engine code N45B20S)- 318i 4cyl 2.0L 143hp from 05/2008 to 10/2011 (engine code N43B20)- 320i 4cyl 170hp from 05/2008 to 10/2011 (engine code N43B20)
Bmw 3 Series E91 Touring:
- 318i 4cyl 2.0L 129hp from 09/2005 to 08/2008 (engine code N46B20)- 320i 4cyl 150hp from 03/2004 to 08/2008 (engine code N46B20)- 318i 4cyl 2.0L 143hp from 05/2008 to 05/2012 (engine code N43B20)- 320i 4cyl 170hp from 07/2007 to 05/2012 (engine code N43B20)
Bmw 3 Series E92 Coupé:
- 320i 4cyl 170hp from 09/2006 to 02/2010 (engine code N43B20)- 320i 4cyl 170hp from 11/2008 to 06/2013 (engine code N43B20)
Bmw 3 Series E93 Cabriolet:
- 320i 4cyl 170hp from 09/2005 to 02/2010 (engine code N43B20)- 320i 4cyl 170hp from 09/2009 to 10/2013 (engine code N43B20)
Caution! Not suitable for models with automatic gearbox!
Screws and bolts not included.

Transmission Selector for Mercedes 190

Mounting at the rear of the driveshaft

For Mercedes 190 C-Class W201 listed below:
- 190 E 2.3-16 (201.034) from 10/1982 to 06/1988 From Chassis No. F222285
- 190 E 2.5 -16 EVO I (201.036) from 07/1988 to 02/1990
- 190 E 2.5 -16 EVO II (201.036) from 03/1990 to 08/1993

Outer diameter 129mm
Inner diameter 41mm
Thickness 24mm
Mounting: Rear

Transmission selector sold complete with mounting kit
OEM quality

Located between the gearbox output and the transmission shaft in the case of those in the "front" position, or between the transmission shaft and the rear axle for those in the "rear" position
Some models with a double flex disc have the same on the front and on the back,

For E81 & E87 LCI
- 120 d N47 with manual gearbox (front + rear position)
- 123 d N47S with automatic transmission (front position)

For E82 & E88:
- 120 d N47 with manual gearbox (front + rear position)
- 123 d N47S with auto gearbox (front + rear position)
- 135 i N55 (front position)
- M N54T (E82 M in front position only)

Drive shaft selector for Mercedes

For Mercedes W123, C123 and S123 all models with 4-speed manual and automatic gearbox

Can be fitted on the front or rear

Outside diameter: 124mm
Inside diameter: 47mm
Thickness: 21mm
Complete kit with screws

Original equipment quality

A worn selector will get slack and cause your driveshaft to rattle

Ridex transmissionselector for Bmw z4 :
Bmw z4 Roadster :
- 2.0i 4 cyl 150hp phase 1 from 06/2004 to 12/2005 (engine code N46B20)- 2.0i 4 cyl 150hp phase 2 from 01/2006 to 08/2008 (engine code N46B20)
Screws and bolts not included.

RIdex transmission selector for Bmw 3 Series :
Bmw 3 Series E30 Sedan:
- 316 1.8L 90hp phase 1 from 03/1983 to 08/1987 (engine code M10B18)- 316 1.8L 90hp phase 2 from 09/1987 to 07/1988 (engine code M10B18)- 316i 102hp phase 2 from 07/1987 to 12/1990 (engine code M40B16)- 318i 105hp phase 1 from 02/1983 to 08/1987 (engine code M10B18i)- 318i 115hp phase 2 from 09/1987 to 04/1991 (engine code M40B18i)- 320i 6cyl 125hp phase 1 from 01/1983 to 08/1985 (engine code M20B20)- 320i 6cyl 129hp phase 1 from 09/1985 to 08/1987 (engine code M20B20)- 320i 6cyl 129hp phase 2 from 09/1987 to 02/1991 (engine code M20B20)- 323i 6cyl 139hp phase 1 from 01/1983 to 08/1984 (engine code M20B23)- 323i 6cyl 150hp phase 1 from 09/1984 to 09/1986 (engine code M20B23)- 325e 6cyl 2.7L 122hp phase 1 from 01/1985 to 02/1986 (engine code M20B27) --> manual gearbox only- 325e 6cyl 2.7L 122hp phase 1 from 12/1986 to 08/1987 (engine code M20B27) --> automatic gearbox only- 325i 6cyl 170hp phase 1 from 03/1985 to 08/1987 (engine code M20B25) --> manual gearbox only- 325i 6cyl 170hp phase 1 from 12/1986 to 08/1987 (engine code M20B25) --> automatic gearbox only- 325i 6cyl 170hp phase 2 from 09/1987 to 01/1991 (engine code M20B25) --> automatic gearbox only- 325ix 6cyl 170hp phase 1 from 11/1985 to 08/1987 (engine code M20B25)- 325ix 6cyl 170hp phase 2 from 09/1987 to 12/1990 (engine code M20B25)- 324d 6cyl 86hp phase 1 from 04/1985 to 08/1987 (engine code M21D24)- 324d 6cyl 86hp phase 2 from 09/1987 to 12/1990 (engine code M21D24)- 324td 6cyl 115cv phase 2 from 02/1987 to 12/1990 (engine code M21D24) --> automatic gearbox only
Bmw 3 Series E30 Coupé:
- 316 1.8L 90hp phase 1 from 03/1982 to 08/1987 (engine code M10B18)- 316 1.8L 90hp phase 2 from 09/1987 to 07/1988 (engine code M10B18)- 316i 102hp phase 2 from 09/1987 to 04/1991 (engine code M40B16)- 318i 105hp phase 1 from 03/1982 to 08/1987 (engine code M10B18i)- 318i 115hp phase 2 from 09/1987 to 04/1991 (engine code M40B18i)- 318is 136hp phase 2 from 02/1989 to 05/1991 (engine code M42B18) --> manual gearboxes only- 320i 6cyl 125hp phase 1 from 01/1982 to 08/1985 (engine code M20B20)- 320i 6cyl 129hp phase 1 from 09/1985 to 08/1987 (engine code M20B20)- 320i 6cyl 129hp phase 2 from 09/1987 to 04/1991 (engine code M20B20)- 323i 6cyl 139hp phase 1 from 12/1981 to 08/1984 (engine code M20B23)- 323i 6cyl 150hp phase 1 from 09/1984 to 09/1986 (engine code M20B23)- 325e 6cyl 2.7L 122hp phase 1 from 01/1985 to 02/1986 (engine code M20B27) --> manual gearbox only- 325e 6cyl 2.7L 122hp phase 1 from 12/1986 to 09/1987 (engine code M20B27) --> automatic gearbox only- 325i 6cyl 170hp phase 1 from 03/1985 to 08/1987 (engine code M20B25) --> manual gearbox only- 325i 6cyl 170hp phase 1 from 12/1986 to 08/1987 (engine code M20B25) --> automatic gearbox only- 325i 6cyl 170hp phase 2 from 09/1987 to 02/1991 (engine code M20B25) --> automatic gearbox only- 325ix 6cyl 170hp phase 1 from 02/1985 to 08/1987 (engine code M20B25)- 325ix 6cyl 170hp phase 2 from 09/1987 to 02/1991 (engine code M20B25)
Bmw 3 Series E30 Touring:
- 316i 102hp from 06/1991 to 02/1994 (engine code M40B16)- 318i 115hp from 02/1989 to 02/1994 (engine code M40B18)- 320i 6cyl 129hp from 01/1988 to 04/1991 (engine code M20B20)- 325i 6cyl 170hp from 07/1987 to 04/1993 (engine code M20B25)- 325ix cat. 6cyl 170hp from 01/1988 to 12/1992 (engine code M20B25)- 324td 6cyl 115hp from 01/1988 to 05/1993 (engine code M21D24) --> automatic gearbox only
Bmw 3 Series E30 Cabriolet :
- 318i 115hp from 07/1990 to 04/1993 (engine code M40B18)- 320i 6cyl 129hp from 04/1986 to 09/1990 (engine code M20B20)- 320i 6cyl 129hp from 10/1990 to 01/1993 (engine code M20B20)- 325i 6cyl 170hp from 07/1985 to 09/1990 (engine code M20B25) --> manual gearbox only- 325i 6cyl 170hp from 12/1986 to 09/1990 (engine code M20B25) --> automatic gearbox only- 325i 6cyl 170hp from 10/1990 to 01/1993 (engine code M20B25)

110mm Transmission Flector for BMW 3 Series E36 Sedan, Touring, Compact, Coupé and Cabriolet :

Sedan :
- 316i 4cyl 100hp from 09/1992 to 02/1994 (engine code M40B16) --> manual gearbox
- 316i 4cyl 102hp from 02/1993 to 09/1998 (engine code M43B16) --> manual gearbox
- 318i 4cyl 113hp from 09/1992 to 03/1994 (engine code M40B18) --> manual gearbox
- 318i 4cyl 116hp from 02/1993 to 06/1998 (engine code M43B18) --> manual gearbox
- 318is 4cyl 140hp from 05/1993 to 01/1996 (engine code M42B18) --> manual gearbox
- 318is 4cyl 1.9L 140hp from 02/1995 to 07/1998 (engine code M44B19) --> manual gearbox
- 318tds man. 4cyl 1.7L 90hp from 01/1994 to 03/1998 (engine code M41D17)
- 320i 150hp from 01/1990 to 08/1992 (engine code M50B20) --> manual gearbox
- 320i 150hp from 09/1992 to 09/1995 (engine code M50B20TU) --> manual gearbox
- 320i 150hp from 12/1993 to 05/1998 (engine code M52B20) --> manual gearbox
- 325i 192hp from 06/1991 to 08/1992 (engine code M50B25) --> manual gearbox
- 325i 192hp from 09/1992 to 11/1994 (engine code M50B25TU) --> manual gearbox

Touring :
- 316i 4cyl 102hp from 09/1996 to 05/1999 (engine code M43B16) --> manual gearbox
- 318i 4cyl 116hp from 02/1995 to 05/1999 (engine code M43B18) --> manual gearbox
- 318tds 4cyl 1.7L 90hp from 10/1994 to 05/1999 (engine code M41D17)
- 320i 150hp from 05/1994 to 05/1999 (engine code M52B20) --> manual gearbox
- 325i 192hp from 06/1991 to 08/1992 (engine code M50B25) --> manual gearbox
- 325i 192hp from 09/1992 to 07/1995 (engine code M50B25TU) --> manual gearbox
- 325td 115hp from 01/1991 to 02/1998 (engine code M51D25) --> automatic gearbox

Compact :
- 316i 4cyl 102hp from 06/1993 to 12/1998 (engine code M43B16) --> manual gearbox
- 316i 4cyl 1.9L 105hp from 01/1999 to 07/2000 (engine code M43B19) --> manual gearbox
- 318ti 4cyl 140hp from 08/1994 to 01/1996 (engine code M42B18) --> manual gearbox
- 318ti 4cyl 1.9L 140hp from 01/1995 to 08/2000 (engine code M44B19) --> manual gearbox
- 318tds 4cyl 1.7L 90hp from 03/1994 to 08/2000 (engine code M41D17)
- 323ti 2.5L 170hp from 01/1997 to 08/2000 (engine code M52B25) --> manual gearbox

Coupé :
- 316i 4cyl 102hp from 03/1993 to 03/1999 (engine code M43B16) --> manual gearbox
- 318is 4cyl 140hp from 09/1992 to 02/1996 (engine code M42B18) --> manual gearbox
- 318is 4cyl 1.9L 140hp from 02/1995 to 05/1999 (engine code M44B19) --> manual gearbox
- 320i 150hp from 02/1991 to 08/1992 (engine code M50B20) --> manual gearbox
- 320i 150hp from 09/1992 to 07/1995 (engine code M50B20TU) --> manual gearbox
- 320i 150hp from 01/1994 to 11/1998 (engine code M52B20) --> manual gearbox
- 325i 192hp from 06/1991 to 08/1992 (engine code M50B25) --> manual gearbox
- 325i 192hp from 09/1992 to 11/1994 (engine code M50B25TU) --> manual gearbox

Cabriolet :
- 318i 4cyl 116hp from 11/1993 to 09/1999 (engine code M43B18) --> manual gearbox
- 320i 150hp from 11/1992 to 04/1995 (engine code M50B20TU) --> manual gearbox
- 320i 150hp from 05/1994 to 10/1999 (engine code M52B20) --> manual gearbox
- 325i 192hp from 08/1992 to 11/1994 (engine code M50B25TU) --> manual gearbox

Screws and bolts included (9 M12X1.5 screws and 6 M12X1.5 self-locking hex nuts).

Dimensions :
- Mounting centers: 78mm
- Outside diameter: 110mm
- Inside diameter: 40mm
- Internal hole diameter: 12mm
- Thickness: 28mm

This bearing offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding.

FEBI 140mm transmissionFlector , located between gearbox output and driveshaft, for BMW 5 Series E60, E60LCI Sedan and E61, E61LCI Touring:
E60 Sedan :- 540i V8 306hp from 02/2005 to 02/2007 (engine code N62B40TU) --> automatic gearbox only- 550i V8 4.8L 367hp from 02/2005 to 02/2007 (engine code N62B48TU) --> automatic gearbox only
E60LCI Sedan :- 540i V8 306hp from 11/2005 to 12/2009 (engine code N62B40TU) --> automatic gearbox only- 550i V8 4.8L 367hp from 11/2005 to 12/2009 (engine code N62B48TU) --> automatic gearbox only- 520d 4cyl 177hp from 04/2006 to 12/2009 (engine code N47D20) --> manual and automatic gearboxes
E61 Touring :- 550i V8 4.8L 367hp from 02/2005 to 02/2007 (engine code N62B48) --> automatic gearbox only
E61LCI Touring :- 550i V8 4.8L 367hp from 11/2005 to 03/2010 (engine code N62B48) --> automatic gearbox only- 520d 4cyl 177hp from 04/2006 to 05/2010 (engine code N47D20) --> manual and automatic gearboxes
Screws and bolts not included.
Dimensions :- Mounting centres: 105mm (6 holes)- Outside diameter: 140mm- Inside diameter: 54mm- Thickness: 41mm