Transmission coupling

Located between the gearbox outlet and the drive shaft,

For E60 & E61:
- 525 d M57N
- 530 d M57N & M57N2
- 540 i N62N manual transmission (E60 only)
- 545 i N62 (manual transmission only from 09/05->)
- 550 i N62N manual transmission only

For E60 LCI & E61 LCI:
- 525 d M57N2
- 530 d M57N2
- 535 d M57N2
- 540 i N62N manual transmission (only for E60)
- 550 i N62N manual transmission only

Transmission Selector for Mercedes E-Class

Front drive shaft mounting
For Mercedes E-Class W124 listed below:

Mercedes W124 sedan:
- 200 D (124.120) from 01/1985 to 08/1989 Manual transmission and up to chassis No. A982463
- 200 E (124.021) from 07/1985 to 08/1989 Up to chassis No. A982463
- 250 D (124.125) from 05/1985 to 08/1989 Up to chassis No. A982463

Mercedes W124 Estate:
- 200 T (124.080) from 11/1985 to 08/1989 Up to chassis N°F107874
- 200 T D (124.180) from 11/1985 to 08/1989 Manual transmission and up to chassis N°F107874
- 200 TE (124.081) from 10/1988 to 08/1989 Up to chassis N°F107874
- 250 T D (124.185) from 10/1985 to 08/1989 Up to chassis N°F107874

Axis 80mm
Outer diameter 128mm
Inner diameter 34mm
Thickness 20,5mm
Mounting: Front

Transmission selector sold complete with mounting kit
OEM quality

FEBI 133mm transmission selector for BMW 5 series E12 and E28 with automatic gearbox only:

E12 :
- 520 4cyl 115hp phase 1 from 02/1972 to 04/1975 (engine code M10B20)
- 525 6cyl 145hp phase 1 from 06/1973 to 08/1976 (engine code M30B25)
- 525 6cyl 150hp phase 2 from 05/1976 to 08/1980 (engine code M30B25)
- 528 6cyl 165hp phase 1 from 11/1974 to 08/1976 (engine code M30B28)
- 528 6cyl 170hp phase 2 from 03/1976 to 09/1977 (engine code M30B28)
- 528i 6cyl 177hp phase 2 from 01/1977 to 02/1978 (engine code M30B28i)
- 528i 6cyl 184hp phase 2 from 02/1978 to 08/1980 (engine code M30B28i)

For Golf 4 4MOTION:
- 1.9 TDi 90 to 150hp
- 2.0 115hp
- 2.3 V5 150 & 170hp
- 2.8 V6 204hp
- 3.2 V6 241hp

To be mounted in the rear position, between the drive shaft and the rear drive axle, MEYLE HD,

For E90 & E91:
- 318 d M47N2 & N47
- 320 d M47N2
- 320 d N47 (automatic transmission only)
- 325 xi N52, N52N & N53
- 330 N52, N52N & N53
- 330 xi N52N & N53

For E92:
- 320 d N47 (automatic transmission only)
- 320 xd N47
- 325 xi N52N & N53
- 330 i/xi N52N & N53

For E93:
- 320 d N47 (automatic transmission only)
- 330 i N52N & N53

To be mounted in the rear position, between the drive shaft and the rear drive axle, MEYLE HD,

For E90 LCI & E91 LCI:
- 316 d N47 (E90 only)
- 316 d N47N
- 318 d N47 & N47N
- 320 d N47 & N47N (automatic transmission only)
- 320 xd N47 & N47N
- 325 xi N52N & N53
- 330 i N52N & N53
- 330 xi n53

For E92 LCI:
- 320 d N47N (automatic transmission only)
- 320 xd N47N
- 325 xi N52N & N53
- 330 i N52N & N53
- 330 xi N53

For E93 LCI:
- 320 d N47N (automatic transmission only)
- 330 i N52N & N53

FEBI Transmission flector for Porsche Cayenne 955 :

- 955 Cayenne V6 3.2 - 250 hp (M02.2Y) from 2003 to 2006
- 955 Cayenne S V8 4.5 - 340 hp (M48.00) from 2003 to 2006
- 955 Cayenne Turbo V8 4.5 - 450 hp (M48.50) from 2003 to 2006
- 955 Cayenne Turbo S V8 4.5 - 521 hp (M48.50) of 2006

Center hole diameter : 58 mm
Hole center distance : 110 mm
Axle thickness : 39 mm

For E46 :
- 325 xi M54
- 330 xi M54
- 330 xd M57& M57N

MEYLE HD range 110mm reinforced transmission selector for BMW Z4 E85 Roadster :

- 2.0i 4 cyl 150hp phase 1 from 06/2004 to 12/2005 (engine code N46B20)
- 2.0i 4 cyl 150hp phase 2 from 01/2006 to 08/2008 (engine code N46B20)

Screws and bolts included (6 M10X50-10.9 screws and 6 M10 self-locking hex nuts).

Dimensions :
- Mounting centres: 78mm (6 holes)
- Outside diameter: 110mm
- Inside diameter: 40mm
- Thickness: 28mm

This bearing offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding.

Ridex transmission selector for Bmw 02:
Bmw E10:
- 1502 1.6l 75hp phase 2 from 11/1974 to 07/1977 (engine code M116)
Screws and bolts not included.

Ridex transmissionselector for Bmw 1 Series:
Bmw 1 Series E81 Sedan:
- 116i 115hp from 04/2007 to 12/2011 (engine code N45B16)- 116i 122hp from 03/2007 to 11/2011 (engine code N43B16)- 116i 2.0L 122hp from 11/2008 to 11/2011 (engine code N43B20)- 118i 2.0L 129hp from 09/2006 to 12/2011 (engine code N46B20)- 118i 2.0L 143hp from 02/2006 to 12/2011 (engine code N43B20)- 120i 150hp from 09/2006 to 10/2011 (engine code N46B20)- 120i 170hp from 09/2006 to 12/2011 (engine code N43B20)
Bmw 1 Series E87 Sedan:
- 116i 115hp from 03/2003 to 02/2007 (engine code N45B16)- 118i 2.0L 129hp from 07/2004 to 02/2007 (engine code N46B20)- 120i 150hp from 03/2003 to 02/2007 (engine code N46B20)- 116i 115hp from 02/2006 to 06/2011 (engine code N45B16)- 116i 122hp from 03/2007 to 06/2011 (engine code N43B16)- 116i 2.0L 122hp from 10/2008 to 06/2011 (engine code N43B20)- 118i 2.0L 129hp from 10/2006 to 06/2011 (engine code N46B20)- 118i 2.0L 143hp from 02/2006 to 06/2011 (engine code N43B20)- 120i 150hp from 09/2006 to 06/2011 (engine code N46B20)- 120i 170hp from 02/2006 to 06/2011 (engine code N43B20)
Bmw 1 Series E82 Coupé:
- 120i 150hp from 06/2009 to 10/2013 (engine code N46B20)- 120i 170hp from 06/2009 to 09/2013 (engine code N43B20)
Bmw 1 Series E88 Cabriolet:
- 118i 2.0L 129hp from 03/2008 to 09/2013 (engine code N46B20)- 118i 2.0L 143hp from 09/2007 to 10/2013 (engine code N43B20)- 120i 150hp from 11/2006 to 10/2013 (engine code N46B20)- 120i 170hp from 11/2006 to 10/2013 (engine code N43B20)
Screws and bolts not supplied.

MEYLE HD range 140mm transmission selector , located between gearbox output and driveshaft, for BMW 5 series E60, E60LCI Sedan and E61, E61LCI Touring:

E60 Sedan :
- 540i V8 306hp from 02/2005 to 02/2007 (engine code N62B40TU) --> automatic gearbox only
- 550i V8 4.8L 367hp from 02/2005 to 02/2007 (engine code N62B48TU) --> automatic gearbox only

E60LCI Sedan :
- 540i V8 306hp from 11/2005 to 12/2009 (engine code N62B40TU) --> automatic gearbox only
- 550i V8 4.8L 367hp from 11/2005 to 12/2009 (engine code N62B48TU) --> automatic gearbox only
- 520d 4cyl 177hp from 04/2006 to 12/2009 (engine code N47D20) --> manual and automatic gearboxes

E61 Touring :
- 550i V8 4.8L 367hp from 02/2005 to 02/2007 (engine code N62B48) --> automatic gearbox only

E61LCI Touring :
- 550i V8 4.8L 367hp from 11/2005 to 03/2010 (engine code N62B48) --> automatic gearbox only
- 520d 4cyl 177hp from 04/2006 to 05/2010 (engine code N47D20) --> manual and automatic gearboxes

Screws and bolts not included.

Dimensions :
- Mounting centres: 105mm (6 holes)
- Outside diameter: 140mm
- Inside diameter: 54mm
- Thickness: 41mm

This bearing offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding.

MEYLE HD reinforced transmission selector for Mercedes SLK

For Mercedes SLK R170 :
- SLK 200 Kompressor (170.445) from 09/1996 to 01/2000 from chassis N°F094037 (rear only)
- SLK 200 Kompressor (170.444) from 02/2000 to 12/2004 (front and rear)
- SLK 230 Kompressor (170.447) from 09/1996 to 01/2000 from chassis N°F094037 (rear only)
- SLK 230 Kompressor (170.449) from 02/2000 to 12/2004 (front and rear)
- SLK 320 (170.465) from 02/2000 to 12/2004 (front and rear)

Manual and automatic transmissions
Sold individually
Mounting kit included

Centre distance 6x100mm
Outside diameter 140mm
Mounting: Front and/or rear depending on model

This driveshaft Flector is OE-quality. MEYLE HD 's use of reinforced materials and optimized design ensures OE-quality workmanship for a long-lasting replacement.

For E12 with manual gearbox up to 09/80
- 518 M10
- 520 & 520i M10
- 520 & 520i M20

FEBI 140mm front driveshaft Flector for BMW 3 series E90LCI Sedan, E91LCI Touring and E92LCI Coupe:

E90LCI Sedan :
- 330dxDrive 245hp from 07/2007 to 10/2011 (engine code N57D30OL) --> manual gearbox

E91LCI Touring :
- 330dxDrive 245hp from 07/2007 to 05/2012 (engine code N57D30OL) --> manual gearbox

E92LCI Coupé :
- 330dxDrive 245hp from 02/2010 to 06/2013 (engine code N57D30OL) --> manual gearbox

Dimensions :
- Number of holes: 6
- Hole diameter : M10
- Outside diameter: 140mm
- Mounting center distance: 105mm

This flector is mounted in the front position between the gearbox and the drive shaft.

M10X1.5-10 ZNS3 screws and M10-10-ZNS3 self-locking hex nuts are not supplied.

This product is sold individually.

MEYLE HD series 140mm front driveshaft Flector for BMW 3 series E90LCI Sedan, E91LCI Touring and E92LCI Coupé :

E90LCI Sedan :
- 330dxDrive 245hp from 07/2007 to 10/2011 (engine code N57D30OL) --> manual gearbox

E91LCI Touring :
- 330dxDrive 245hp from 07/2007 to 05/2012 (engine code N57D30OL) --> manual gearbox

E92LCI Coupé :
- 330dxDrive 245hp from 02/2010 to 06/2013 (engine code N57D30OL) --> manual gearbox

Dimensions :
- Number of holes: 6
- Hole diameter : M10
- Outside diameter: 140mm
- Mounting center distance: 105mm

This flector is mounted in the front position between the gearbox and the drive shaft.

M10X1.5-10 ZNS3 screws and M10-10-ZNS3 self-locking hex nuts are not supplied.

This product is sold individually.

This part offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding.

MEYLE HD transmissionselector for Bmw X5 E70 : Bmw X5 E70 : - X5 M 8cyl 555hp from 07/2008 to 06/2013 (engine code s63)
Bmw X5 E70 Lci : - M50D 6cyl 381hp from 08/2011 to 06/2013 (n57d30 Three Turbo)

MEYLE HD range transmission selector , located between the gearbox output and thedriveshaft, offers optimized quality compared with the original, with design flaws corrected, stronger for better durability and improved roadholding.

MEYLE HD range 110mm reinforced transmission selector for BMW Z3 E36 Roadster :

- 1.9 16V 4cyl 140hp phase 1 from 04/1995 to 04/1999 (engine code M44B19) --> automatic gearbox

Hardware included (6 M10X50-10.9 screws and 6 M10 self-locking hex nuts).

Dimensions :
- Mounting centers: 78mm
- Outside diameter: 110mm
- Inside diameter: 40mm
- Thickness: 28mm

This bearing offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding.

Meyle OE transmissionselector for Bmw E3:
Bmw E3 :
- 2.8L 6cyl 170hp from 12/1974 to 02/1977 (engine code m30)- 2500 6cyl 150hp from 08/1968 to 02/1977 (engine code m30)- 2800 6cyl 170hp from 04/1969 to 02/1975 (engine code m30)- 3.0L 6cyl 180hp from 12/1974 to 02/1977 (engine code m30)- 3.0S 6cyl 180hp from 05/1971 to 02/1977 (engine code m30)- 3.0si 6cyl 200hp from 09/1971 to 02/1977 (engine code m30)
Warning! Not suitable for 3.3 engine code m30.

FEBI transmissionselector for Bmw E3 : - Compatible with all Bmw E3 versions with automatic gearbox only from 02/1969 to 02/1977 including 3.0si engine code m30.