Transmission coupling

Ridex transmissionselector for Bmw 5 Series:
Bmw 5 Series E34 Sedan:
- 518i 4cyl 113hp phase 1 from 04/1989 to 05/1994 (engine code M40B18) --> manual and automatic gearboxes- 520i 129hp phase 1 from 06/1987 to 04/1990 (engine code M20B20) --> manual and automatic gearboxes- 520i 150hp phase 1 from 05/1990 to 12/1990 (engine code M50B20) --> manual gearbox- 520i 150hp phase 1 from 09/1990 to 08/1992 (engine code M50B20) --> automatic gearbox- 520i 150hp phase 1 from 09/1992 to 03/1994 (engine code M50B20TU) --> automatic gearbox- 520i 150hp phase 2 from 04/1994 to 12/1995 (engine code M50B20TU) --> automatic gearbox- 525ix 192hp phase 1 from 04/1991 to 08/1992 (engine code M50B25) --> manual and automatic gearboxes- 525ix 192hp phase 1 from 09/1992 to 03/1994 (engine code M50B25TU) --> manual and automatic gearboxes- 525ix 192hp phase 2 from 04/1994 to 12/1995 (engine code M50B25TU) --> manual and automatic gearboxes- 524td 115hp phase 1 from 07/1987 to 08/1991 (engine code M21D24) --> automatic transmission
Bmw 5 Series E34 Touring:
- 520i 150hp phase 1 from 11/1990 to 12/1990 (engine code M50B20) --> manual gearbox- 520i 150hp phase 1 from 11/1990 to 08/1992 (engine code M50B20) --> automatic gearbox- 520i 150hp phase 1 from 09/1992 to 03/1994 (engine code M50B20TU) --> automatic gearbox- 520i 150hp phase 2 from 04/1994 to 06/1996 (engine code M50B20TU) --> automatic gearbox- 525ix 192hp phase 1 from 07/1991 to 08/1992 (engine code M50B25) --> manual and automatic gearboxes- 525ix 192hp phase 1 from 09/1992 to 03/1994 (engine code M50B25TU) --> manual and automatic gearboxes- 525ix 192hp phase 2 from 04/1994 to 03/1996 (engine code M50B25TU) --> manual and automatic gearboxes
Screws and bolts not supplied.

Reinforced 110mm MEYLE HD transmission selector, located between gearbox output and driveshaft , for BMW 3 Series E90, E90LCI Sedan, E91, E91LCI Touring, E92, E92LCI Coupé, E93 and E93LCI Cabriolet with manual gearbox only:

E90 Sedan :
- 318i 4cyl 2.0L 129hp from 08/2004 to 08/2008 (engine code N46B20)
- 320i 4cyl 150hp from 02/2004 to 09/2008 (engine code N46B20)
- 320si 4cyl 173hp from 09/2005 to 08/2006 (engine code N45B20S)

E90LCI Sedan :
- 318i 4cyl 2.0L 143hp from 05/2008 to 10/2011 (engine code N43B20)
- 320i 4cyl 170hp from 05/2008 to 10/2011 (engine code N43B20)

E91 Touring :
- 318i 4cyl 2.0L 129hp from 09/2005 to 08/2008 (engine code N46B20)
- 320i 4cyl 150hp from 03/2004 to 08/2008 (engine code N46B20)

E91LCI Touring :
- 318i 4cyl 2.0L 143hp from 05/2008 to 05/2012 (engine code N43B20)
- 320i 4cyl 170hp from 07/2007 to 05/2012 (engine code N43B20)

E92 Coupé :
- 320i 4cyl 170hp from 09/2006 to 02/2010 (engine code N43B20)

E92LCI Coupé :
- 320i 4cyl 170hp from 11/2008 to 06/2013 (engine code N43B20)

E93 Cabriolet :
- 320i 4cyl 170hp from 09/2005 to 02/2010 (engine code N43B20)

E93LCI Cabriolet :
- 320i 4cyl 170hp from 09/2009 to 10/2013 (engine code N43B20)

ATTENTION: Not suitable for models with automatic gearbox!

Screws and bolts included (6 M10X50-10.9 screws and 6 M10 self-locking hex nuts).

Dimensions:
- Mounting centres: 78mm (6 holes)
- Outside diameter: 110mm
- Inside diameter: 40mm
- Thickness: 28mm

This bearing offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding.

FEBI transmission selector for Bmw 6 Series:

Bmw E63 :

- 630i 6 cyl 258hp from 02/2004 to 07/2007 (engine code n52b30a)
- 630i 6 cyl 272hp from 04/2006 to 07/2010 (engine code n53b30a)
- 630i 6 cyl 258hp from 05/2006 to 07/2010 (engine code n52b30n)

Bmw E64 :

- 630i 6 cyl 258hp from 03/2004 to 07/2007 (engine code n52b30a)
- 630i 6 cyl 272hp from 04/2006 to 07/2010 (engine code n53b30a)
- 630i 6 cyl 258hp from 05/2006 to 07/2010 (engine code n52b30n)

Screws and bolts not included.

FEBI transmission selector for Bmw 7 Series:

Bmw E23 :

- 728i 6cyl 184hp from 09/1980 to 05/1986 automatic gearbox (engine code m30b28)
- 728is 6cyl 184hp from 03/1981 to 04/1986 automatic gearbox (engine code m30b28)
- 732i 6cyl 197hp from 09/1980 to 05/1986 automatic gearbox (engine code m30b32)
- 733i 6cyl 197hp from 09/1980 to 07/1982 automatic gearbox (engine code m30b32)
- 735i 6cyl 218hp from 09/1980 to 06/1986 automatic gearbox (engine code m30b34)

Warning! Not suitable for manual gearbox versions.

Screws and bolts not supplied.

Transmission Selector for Mercedes 190

For front driveshaft mounting

For Mercedes 190 C-Class W201 listed below:
- 190 (201.022) from 10/1982 to 09/1984
- 190 (201.023) from 10/1984 to 06/1988
- 190 (201.023) from 09/1988 to 01/1991 Automatic transmission and up to chassis No. A495250 or F616831
- 190 D (201.122) from 07/1988 to 08/1989 Manual transmission and up to chassis No. A495250 or F616831
- 190 D (201.122) from 07/1988 to 08/1989 Manual transmission and up to chassis No. A495250 or F616831
- 190 D 2.5 (201.126) from 09/1985 to 06/1988
- 190 D 2.5 (201.126) from 07/1988 to 08/1993 Up to chassis N°A495250 or F616830
- 190 E 2.0 (201.024) from 10/1982 to 09/1988
- 190 E 2.0 (201.024) from 07/1988 to 08/1993 Manual gearbox up to chassis N°A495250 or F616784
- 190 E 2.0 (201.024) from 07/1988 to 08/1993 Automatic gearbox up to chassis N°A495250 or F616731

Axis 80mm
Outer diameter 128mm
Inner diameter 34mm
Thickness 20,5mm
Front mounting

Transmission selector sold complete with mounting kit
OEM quality

Transmission Selector for Mercedes E-Class

Front drive shaft mounting
For Mercedes E-Class W124 listed below:

Mercedes W124 sedan:
- 260 E (124.026) Automatic transmission from 09/1989 to 10/1992
- 300 E (124.030) from 09/1989 to 11/1992 Automatic transmission and from chassis No. B233930

Mercedes S124 Estate:
- 300 TE (124.090) from 09/1989 to 10/1992 Automatic transmission and from chassis N°F143373

Mercedes C124 Coupé :
- 300 CE (124.050) from 09/1989 to 10/1992 Automatic gearbox and from chassis No. B233930

Axis 100mm
Outer diameter 146mm
Inner diameter 42mm
Thickness 26mm
Mounting: Front

Transmission selector sold complete with mounting kit
OEM quality

Transmission Selector for Mercedes E-Class

Front drive shaft mounting
For Mercedes E-Class W124 listed below:

Mercedes W124 sedan:
- 260 E 4-Matic (124.226) from 09/1989 to 06/1991
- 300 D 4-Matic (124.330) from 03/1987 to 06/1991
- 300 D turbo 4-Matic (124.333) from 03/1988 to 07/1993
- E 300 TurboDiesel 4-Matic (124.333) from 07/1993 to 03/1995
- 300 E 4-Matic (124.230) from 07/1987 to 07/1993
- E 300 4-Matic (124.230) from 07/1993 to 04/1995

Mercedes S124 Estate:
- 300 T D Turbo 4-Matic (124.393) from 08/1987 to 07/1993
- E 300 Estate TurboDiesel 4-Matic (124.393) from 07/1993 to 03/1995
- 300 TE 4-Matic (124.290) from 04/1987 to 07/1993
- E 300 Estate 4-Matic (124.290) from 07/1993 to 04/1995

Axis 80mm
Outer diameter 115mm
Inner diameter 41mm
Thickness 20,5mm
Mounting: Front

Transmission reflector sold complete with mounting kit
OEM quality

Transmission Selector for Mercedes E-Class

Mounted on the rear of the driveshaft
For Mercedes E-Class W124 listed below:

Mercedes W124 sedan:
- 200 (124.020) from 01/1985 to 06/1990 without ASD
- 200 (124.020) from 01/1985 to 06/1990 with ASD and up to chassis N°A887155
- 200 D (124.120) from 01/1985 to 07/1993 without ASD and up to chassis N°B644866, then from chassis N°B655393 up to N°B938072
- 200 D (124.120) from 01/1985 to 07/1993 with ASD and up to chassis N°A887155
- 200 E (124.021) from 07/1985 to 07/1993 without ASD and up to chassis N°B644866, then from chassis N°B655393 to N°B938072
- 200 E (124.021) from 07/1985 to 07/1993 with ASD and up to chassis N°A887155
- 250 D (124.125) from 05/1985 to 07/1993 without ASD and up to chassis N°B644866, then from chassis N°B655393 up to N°B938072
- 250 D (124.125) from 05/1985 to 07/1993 with ASD and up to chassis N°A887155

Mercedes S124 Break:
- 200 T (124.080) from 11/1985 to 05/1990 without ASD
- 200 T (124.080) from 11/1985 to 05/1990 with ASD and until chassis N°F093372
- 200 T D (124.180) from 11/1985 to 08/1989 without ASD and up to chassis N°F204957
- 200 T D (124.180) from 11/1985 to 08/1989 with ASD and up to chassis N°F093372
- 200 TE (124.081) from 10/1988 to 08/1989 with ASD and up to chassis N°F093372
- 200 TE (124.081) from 10/1988 to 07/1993 without ASD and up to chassis N°F204957 then from chassis N°F207840 to N°F253126
- 250 T D (124.185) from 10/1985 to 07/1993 without ASD and up to chassis N°F204957 then from chassis N°F207840 up to N°F253126

Axis 80mm
Outside diameter 115mm
Inside diameter 41mm
Thickness 20,5mm
Mounting: Rear

Transmission selector sold complete with mounting kit
OEM quality

Meyle HD reinforced transmissionselector for Bmw z1 :
Bmw z1 E30 Roadster :
- 2.5i 6cyl 170hp from 07/1988 to 06/1991 (engine code m20b25)

Transmission bush for Porsche 911 type 996, 4 wheel drive :

- 996 phase 1 3.4 - 300 hp (M96.01/M96.02/M96.04) Carrera 4 from 1998 to 2001
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 - 320 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4 from 2002 to 2005
- 996 phase 2 3.6 X51 - 345 hp (M96.03) Carrera 4S from 2002 to 2005
- 996 3.6 Turbo - 420 hp (M96.70) from 2000 to 2005
- 996 3.6 Turbo X50 - 450 hp (M96.70) from 2001 to 2005
- 996 3.6 Turbo S - 450 hp (M96.70) of 2005

Flector transmission for Peugeot 106 1.0l, 1.1l and 1.4l (09/1991-04/1996)
nuts and bolts supplied
Assignments :1.0, Year of manufacture 09.1991 - 04.1996, 954 ccm, 45 HP1.0, Year of manufacture 09.1991 - 04.1996, 954 ccm, 50 HP1.1, Construction year 09.1991 - 04.1996, 1124 ccm, 60 CH1.4, Year of construction 09.1991 - 04.1996, 1360 ccm, 75 CH1.4 Le Mans, Year of construction 09.1991 - 11.1994, 1361 ccm, 94 CH

Flector transmission for Mercedes SLK

For Mercedes SLK R170 :
- SLK 200 (170.435) from 09/1996 to 01/2000

Rear driveshaft mounting
Manual and automatic gearboxes

Centre distance 90mm
Outside diameter 129mm
Inner diameter 41mm
Thickness 24mm
Mounting: Rear

Driveshaft Flector sold complete with mounting kit
Original equipment quality

MEYLE HD reinforced transmission selector for Mercedes SLK

For Mercedes SLK R170 :
- SLK 200 Kompressor (170.445) from 09/1996 to 01/2000 from chassis N°F094037 (rear only)
- SLK 200 Kompressor (170.444) from 02/2000 to 12/2004 (front and rear)
- SLK 230 Kompressor (170.447) from 09/1996 to 01/2000 from chassis N°F094037 (rear only)
- SLK 230 Kompressor (170.449) from 02/2000 to 12/2004 (front and rear)
- SLK 320 (170.465) from 02/2000 to 12/2004 (front and rear)

Manual and automatic transmissions
Sold individually
Mounting kit included

Centre distance 6x100mm
Outside diameter 140mm
Mounting: Front and/or rear depending on model

This driveshaft Flector is OE-quality. MEYLE HD 's use of reinforced materials and optimized design ensures OE-quality workmanship for a long-lasting replacement.

FEBI BILSTEIN transmission selector for Mercedes SLK

For Mercedes SLK R170 :
- SLK 200 Kompressor (170.445) from 09/1996 to 01/2000 from chassis N°F094037 (rear only)
- SLK 200 Kompressor (170.444) from 02/2000 to 12/2004 (front and rear)
- SLK 230 Kompressor (170.447) from 09/1996 to 01/2000 from chassis N°F094037 (rear only)
- SLK 230 Kompressor (170.449) from 02/2000 to 12/2004 (front and rear)
- SLK 320 (170.465) from 02/2000 to 12/2004 (front and rear)

Manual and automatic transmissions
Sold individually
Mounting kit included

Centre distance 6x100mm
Outside diameter 140mm
Mounting: Front and/or rear depending on model

German quality FEBI BILSTEIN

MEYLE driveshaft bearing for Mercedes SLK

For Mercedes SLK R170 :
- SLK 200 Kompressor (170.445) from 09/1996 to 01/2000
- SLK 230 Kompressor (170.447) from 09/1996 to 01/2000

The central bearing has the dual role of transmission shaft support and bearing. A worn or defective bearing will create play and shaft slamming.

Inside diameter 30mm
Original MEYLE quality

FEBI Transmission flector for Porsche Cayenne 955 :

- 955 Cayenne V6 3.2 - 250 hp (M02.2Y) from 2003 to 2006
- 955 Cayenne S V8 4.5 - 340 hp (M48.00) from 2003 to 2006
- 955 Cayenne Turbo V8 4.5 - 450 hp (M48.50) from 2003 to 2006
- 955 Cayenne Turbo S V8 4.5 - 521 hp (M48.50) of 2006

Center hole diameter : 58 mm
Hole center distance : 110 mm
Axle thickness : 39 mm

MEYLE HD range 140mm reinforced transmission selector

Located between the gearbox output and the drive shaft for those in the "front" position, or between the drive shaft and the rear axle for those in the "rear" position
Some models with double flector have the same at front and rear

For E90, E91 and E92 :
- 320 d N47 with manual gearbox (front-rear position)
- 325 d M57N2 with automatic gearbox (front/rear position)
- 330 xd M57N2 since 09/07 with automatic gearbox (rear position)
- 335 d M57N2 (front position)
- 335 i N54 (front position)

For E93 :
- 320 d N47 with manual gearbox (front/rear position)
- 325 d M57N2 with automatic gearbox (front/rear position)
- 335 i N54 (front position)

Screws and bolts included.

Dimensions :
- Mounting centers: 105 mm (6 holes)
- Outside diameter: 140 mm
- Inside diameter: 54 mm
- Thickness: 41 mm

This bearing offers optimized quality compared to the original, with design flaws corrected and greater strength for improved durability and roadholding.

RIdex transmission selector for Bmw 3 Series :
Bmw 3 Series E36 Sedan :
- 316i 4cyl 100hp from 12/1990 to 08/1992 (engine code M40B16) --> manual gearbox- 316i 4cyl 100hp from 12/1991 to 02/1994 (engine code M40B16) --> automatic gearbox- 316i 4cyl 102hp from 02/1993 to 09/1998 (engine code M43B16) --> automatic gearbox- 318i 4cyl 113hp from 12/1989 to 08/1992 (engine code M40B18) --> manual gearbox- 318i 4cyl 113hp from 12/1991 to 03/1994 (engine code M40B18) --> automatic gearbox- 318i 4cyl 116hp from 02/1993 to 06/1998 (engine code M43B18) --> automatic gearbox- 318is 4cyl 140hp from 05/1993 to 01/1996 (engine code M42B18) --> automatic gearbox- 318is 4cyl 1.9L 140hp from 02/1995 to 07/1998 (engine code M44B19) --> automatic gearbox- 320i 150hp from 12/1991 to 08/1992 (engine code M50B20) --> automatic gearbox- 320i 150hp from 09/1992 to 09/1995 (engine code M50B20TU) --> automatic gearbox- 320i 150hp from 12/1993 to 05/1998 (engine code M52B20) --> automatic gearbox
Bmw 3 Series E36 Touring:
- 316i 4cyl 102hp from 09/1996 to 05/1999 (engine code M43B16) --> automatic gearbox- 318i 4cyl 116hp from 02/1995 to 05/1999 (engine code M43B18) --> automatic gearbox- 320i 150hp from 05/1994 to 05/1999 (engine code M52B20) --> automatic gearbox
Bmw 3 Series E36 Compact:
- 316i 4cyl 102hp from 06/1993 to 12/1998 (engine code M43B16) --> automatic gearbox- 316i 4cyl 1.9L 105hp from 01/1999 to 07/2000 (engine code M43B19) --> automatic gearbox- 318ti 4cyl 140hp from 08/1994 to 01/1996 (engine code M42B18) --> automatic gearbox- 318ti 4cyl 1.9L 140hp from 01/1995 to 08/2000 (engine code M44B19) --> automatic gearbox
Bmw 3 Series E36 Coupé:
- 316i 4cyl 102hp from 03/1993 to 03/1999 (engine code M43B16) --> automatic gearbox- 318is 4cyl 140hp from 02/1991 to 08/1992 (engine code M42B18) --> manual gearbox- 318is 4cyl 1.9L 140hp from 02/1995 to 05/1999 (engine code M44B19) --> automatic gearbox- 320i 150hp from 12/1991 to 08/1992 (engine code M50B20) --> automatic gearbox- 320i 150hp from 09/1992 to 07/1995 (engine code M50B20TU) --> automatic gearbox- 320i 150hp from 01/1994 to 11/1998 (engine code M52B20) --> automatic gearbox
Bmw 3 Series E36 Cabriolet :
- 318i 4cyl 116hp from 11/1993 to 09/1999 (engine code M43B18) --> automatic gearbox- 320i 150hp from 11/1992 to 04/1995 (engine code M50B20TU) --> automatic gearbox- 320i 150hp from 05/1994 to 10/1999 (engine code M52B20) --> automatic gearbox
Screws and bolts not supplied.

Flector de transmission RIdex pour Bmw Série 5 :
Bmw Série 5 E12 :
- 518 4cyl 90cv phase 1 du 05/1974 au 07/1976 (code moteur M10B18) --> boîte automatique- 518 4cyl 90cv phase 2 du 08/1976 au 05/1981 (code moteur M10B18) --> boîte automatique- 518 4cyl 90cv phase 2 du 09/1980 au 05/1981 (code moteur M10B18) --> boîte manuelle- 518i 4cyl 100cv phase 2 du 09/1980 au 06/1981 (code moteur M10B18i) --> boîte manuelle- 520 4cyl 115cv phase 1 du 05/1975 au 07/1976 (code moteur M10B20) --> boîte automatique- 520 4cyl 115cv phase 2 du 08/1976 au 06/1981 (code moteur M10B20) --> boîte automatique- 520-6 6cyl 122cv phase 2 du 09/1980 au 06/1981 (code moteur M20B20) --> boîte manuelle- 520-6 6cyl 122cv phase 2 du 08/1977 au 06/1981 (code moteur M20B20) --> boîte automatique

Located in the centre position between the two halves of the drive shaft,

For E60 LCI & E61 LCI:
- 520 i N46N (E60 only)
- 520 i N43