Clutch kit

SACHS Clutch kit for Porsche 911 type 997 phase 2 :

- 997 phase 2 3.6 - 345 hp (MA 102) Carrera from 2009 to 2012
- 997 phase 2 3.6 - 345 hp (MA 102) Carrera 4 from 2009 to 2012
- 997 phase 2 3.8 - 385 hp (MA 101) Carrera S from 2009 to 2012
- 997 phase 2 3.8 - 385 hp (MA 101) Carrera 4S from 2009 to 2012
- 997 phase 2 3.8 X51 - 408 hp (MA 101) Carrera S from 2009 to 2012
- 997 phase 2 3.8 X51 - 408 hp (MA 101) Carrera 4S from 2009 to 2012
- 997 3.8 - 408 hp (MA 101) Carrera GTS from 2011 to 2012
- 997 3.8 - 408 hp (MA 101) Carrera 4 GTS of 2012

Contains the clutch mechanism, disc and bearing.

This clutch kit for Mehari after 1982 - 18-spline disc and diaphragm mechanism is compatible with Mehari models from 1982 onwards.

This kit includes:
- diaphragm mechanism
- bearing
- clutch disc

Check for compatibility by counting the number of splines on your clutch disc shaft.

Clutch kit SACHS 200mm for Volkswagen Golf 2
For VW Golf 2 :- 1.8 90hp (GU, GX) year 1984 if mounted in 200mm- 1.6 D 54hp (JP) up to 07/1989- 1.6 TD 70hp (JR) until 07/1989
Complete 200mmclutch kit including mechanism, disc, plate and clipOriginal SACHS quality

Clutch kit for Austin :
- Compatible with all Austin Mini versions from 09/1959 to 12/1983, including Cooper models.
Please note! Steering wheel not included.

This quality kit should replace the entire kit on the car. The SACHS dual mass flywheel is only compatible with the SACHS clutch.

For Golf 4 and Bora (including 4 Motion) :
- 1.9 TDi 130hp (ASZ)
- 1.9 TDi 150hp (ARL)

ForAudi A3 8P including Sportback (8PA):
- 2.0 TDi 136 hp (AZV)
- 2.0 TDi140 hp (BMM) including Quattro
- 2.0 TDi 16V 140 hp (BKD)
- 2.0 TDi 170 hp (BMN) including Quattro

For Audi A3 Cabriolet (8P7):
- 2.0TDi 140 hp (CBAB)

240 mm kit including:
- The dual mass flywheel
- The pressure plate
- The disc
- The release bearing
- Bolts

Clutch kit 160mm for Renault 5

For Renault 5 4 speed gearbox :
- Renault 5 L (R1220) from 01/1972 to 12/1976 - Billancourt 782cm3 36hp (839-01)
- Renault 5 L (R1221/R1391) from 01/1977 to 12/1983 - Billancourt 845cm3 38hp (800-710)
- Renault 5 TL (R1222/R1392) from 01/1972 to 12/1984 - Cléon Fonte 956cm3 46hp (689-710) up to chassis N°1079617

Gearbox codes: HA0

Clutch kit complete with disc, mechanism and clutch release bearing.

For Golf 5:
- 2.0 TDi 136hp (AZV) with GRF, HDV or KDN gearbox
- 2.0 TDi 140hp (BKD) with FUQ, GRF, HDV or HJR gearbox
- 2.0 TDi 140hp (BMM) with FUQ or HDV gearbox
- 2.0 TDi 170hp (BMN) with HVS, JMA gearbox

For Golf 5 4MOTION (4WD):
- 2.0 TDi 140hp (BKD) with HJR gearbox from 06/05->
- 2.0 TDi 140hp (BMM) with KDL gearbox from 05/07->

For Golf 4 :
- 1.9 TDi 90hp (ALH): if mounted in 228 mm
- 1.9 TDi 100hp (ATD, AXR)
Not suitable for 4MOTION

For New Beetle :
- 1.9 TDi 90hp (ALH): if mounted in 228 mm

This LUK clutch kit for AMI 8 from 1970 to 1979 - 18 spline disc and diaphragm mechanism has a diaphragm mechanism that is compatible with AMI 8 from 1970 to 1979.

Thediaphragm clutch gives you a more precision, progressive selection than the traditional 3-finger system without changing the engine flywheel.

This high quality LUK conversion kit includes:
- a diaphragm mechanism
- a clutch release bearing
- a clutch disc

Check for compatibility by counting the number of splines on your clutch disc shaft.

For Golf 3:
- 2.0 GTi 16s 150hp (ABF) from 92 ->10/97

For Scirocco with 200 mm clutch:
- 1.6 GLi 110hp (EG)
- 1.8 90hp (EX)

For Polo (86C):
- 1.0 (GL,HZ) 85 ->92 (since chassis no. G-170 001->)
- 1.0 (AAK, AAU, ACM, AEV)90 ->95
- 1.3 (GT) 85 ->87 (since engine no. 016143->)
- 1.3 (GK) 85->91 (since chassis no. G-015 001->)
- 1.3 (AAV, MH, NU, NZ, RC, SC, 2G, 3F) 85 ->95
- 1.3 Diesel (MN) 86 ->90
- 1.4 90 ->94
- 1.4 Diesel (1W) 90 ->95

228mm 10-tooth clutch kit for BMW 3 Series E21, E30 and 5 Series E28:

E21:
- 323i 6cyl 143cv from 07/1977 to 10/1982 (engine code M20B23)

E30 Sedan, Coupé and Touring:
- 325ix 6cyl 170cv phase 1 from 02/1985 to 08/1987 (engine code M20B25)
- 325ix 6cyl 170cv phase 2 from 09/1987 to 12/1992 (engine code M20B25)

E28:
- 520i 6cyl 125cv from 11/1980 to 02/1984 (engine code M20B20)

Height of the stopper OEM reference BMW 21511204525: 30 mm

ATTENTION: This kit is not suitable for E28 520i from 03/1984 (the clutch release bearing is different)!

For Passat 4 (3B2, 3B5):
- 1.9 TDi 115hp (AJM, ATJ) from 08/98->11/00

For Passat 5 (3B3, 3B6):
- 1.9 TDi 130/131hp(AWX) from11/00 ->05/05

Not suitable for assembly with an original 240mm LUKflywheel

This kit consists of a rigid flywheel, a pressure plate, a228mm disc and a release bearing. An economical and high performance alternative to the original assembly, for replacement of the original clutch anddualmass flywheel.

For Golf 5:
- 1.4 16v 75hp & 80hp (BCA & BUD)
- 1.4 FSi 90hp (BKG, BLN)

SACHS Clutch kit for Porsche Cayman 987 S and R :

- 987 3.4 Cayman S phase 2 - 320 hp (MA1.21) from 2009 to 2012
- 987 3.4 Cayman R - 330 hp (MA1.21) from 2011 to 2012

Contains the pressure plate, the clutch disc and the release bearing.

Complete rigid conversion kit to replace the original dual-mass kit.
Rigid engine flywheel, disc and clutch mechanism for an even more cost-effective assembly.

For VOLKSWAGEN Transporter T4:
- 2.5 TDi 102hp (ACV, AYC) with AFK, DXZ or FTV type gearbox
- 2.5 TDi Syncro 102hp from 05/98-> (ACV) with EFA type gearbox

Suitable for:
- E39 528i M52 engine up to ->09/97
- E39 525TDS M51 engine up to ->09/97

For Golf 3:
- 1.9 TDi 90hp (1Z, AHU, ALE) from 10/93 ->10/97
(since engine no. 114631->)